User manual
15.7 Operation
15.7.1 Pairing
Follow section 9.7 Link a sensor to the gateway on page 11 to pair the product with the Gateway.
15.7.2 How it works
The sensor is triggered in two ways:
• Leak is detected: When all 3 metal pins at the bottom of the sensor are immersed in water.
• Inadvertent relocation: through jolts, shaking, or tilting
15.7.3 Indications/Alarm
This product can send push notications to your mobile device.
• When a leak is detected or the sensor is moved, the indicator light ashes and the built-in alarm sounds. A push
notication is sent to the mobile app.
• To stop the alarm, lift the sensor out of the water (if the alarm does not stop, remove the batteries).
• Alarms are congured through the mobile app.
15.8 Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
Clean product with a dry, bre-free cloth.
15.9 Technical data
Batteries ...........................................................2x 1.5 V AAA type
Communication technology ..............................sub-G (868 MHz)
Transmission range ..........................................max. 100 m (open space)
Transmission power..........................................-8±2 dBm
Buzzer volume ..................................................min. 85 dB / 10 cm
Protection class ................................................IPX4
Dimensions (Ø x H) ..........................................71.5 x 26 mm
Weight ..............................................................approx. 40 g
29