User manual
17.4 Safety instructions
Attention! Also observe chapter 6 General safety instructions on page 7.
17.4.1 Installation location
This product must be installed and used only in dry conditions indoors. The product must not get damp or wet, as the
wall plug transformer can pose the risk of a fatal electric shock!
17.4.2 Connection
• Make sure that cables are not pinched, kinked or damaged by sharp edges.
• Always establish the power supply last, after all components are connected.
17.4.3 Noise
Keep a safe distance to the product when it is triggered to avoid damage to hearing. Approach it only with hearing
protection.
17.4.4 LED ash light
Attention, LED light: Do not look directly into the LED light! Do not look into the beam directly or with optical instru-
ments!
17.5 Operating elements
5
6
1
2
7
4
8
3
1 Upper housing
2 Lower housing
3 Hole for wall mounting
4 Power supply cable
5 Pairing button
6 Tamper switch
7 Siren
8 Backup battery
33