User manual

17.7.4 Resetting
Delete the siren from the mobile app. The siren is reset.
17.8 Care and cleaning
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
• Before you clean the product disconnect it from the power supply.
• The outside of the product should only be cleaned with a clean, soft, dry cloth.
• The built-in LEDs are permanently installed and cannot be replaced.
17.8.1 Replace the battery
Before you start replacing the battery, disable the siren by disabling automation for the siren in the
app and holding down the tamper switch.
• Make sure you only use a high quality battery.
• Replace the battery at least once a year.
• Follow the relevant steps given in chapter 17.6 Installation on page 34 to replace the battery.
17.9 Technical data
17.9.1 Siren
Operating voltage .............................................12 V/DC / 9 V battery (6LR61)
Transmission technologies ...............................sub-G (868 MHz)
Transmission power..........................................-8 ± 2 dBm
Communication range ......................................max. 100 m (line of sight)
Strobe light (from 40 cm distance) ....................High: 114 lx // Medium: 79 lx // Low: 5 lx
Buzzer (from 100 cm/10 cm distance) .............. High: 90/110 dB // Medium: 85/100 dB // Low: 80/90 dB
Operating conditions .........................................-10 to +55 °C, 10 – 90% RH (not condensing)
Storage conditions ............................................-10 to +60 °C, 5 – 90% RH (not condensing)
Dimensions (W x H x D) ...................................73 x 123 x 47 mm
Weight ..............................................................approx. 105 g
37