User manual
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1681127_P713C_v1_0818_02_jh_m_en_(1.7)
Installation
• Turn off power supply to the E27 lamp socket you wish to use.
• Screw the product into the E27 lamp socket. Do not overtighten.
Operation
To avoid product damage do not dim the product via power supply (e.g.
physically installed dimmer).
• Refer to the corresponding app manual to learn more about WLAN setup and
operation of the product in combination with the mobile app.
• Without conguration via mobile app the product functions as a regular product of
its kind. Turn it on and off via light switch.
a) Indications
State Bulb colour Indication
After powering on Red ► Green ► Blue ►
White
Bulb ready to be linked to
a Sygonix account.
After powering on Solid Bulb has been linked to a
Sygonix account once.
Resetting
If you wish to associate the product with another user account (see app manual) you
must reset the product as follows:
• Turn the product on.
• Turn the product off and on for 3 times in a row.
• The product sequentially will toggle through Red ► Green ► Blue ► White
two times.
Maintenance and Cleaning
• The product does not require any maintenance. You should not open/disassemble
it. Repair or maintenance work must be carried out by a specialist.
• Before cleaning, disconnect the product from the power supply.
• You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed
with a soft, clean brush and a vacuum cleaner.
• Do not use aggressive chemical or scouring cleaning agents, as this may lead to
discolouration or changes in the material on the surface.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, herewith declares
that this product conforms to the 2014/53/EU directive.
The full text of the EU declaration of conformity is available at the Internet
address below: www.conrad.com/downloads
Select a language by clicking on the corresponding ag icon, and then
enter the order number of the product into the search box. You may then
download the EU declaration of conformity as PDF le.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus full your statutory obligations and contribute to the protection of
the environment.
Technical data
Rated Input ............................. 100 – 240 V/AC, 50/60 Hz
Power consumption ................ 10 W (equivalent to 60 W)
Socket ..................................... E27
Colour temperature ................. 2700 – 6500 K
Lumen ..................................... 750 lm (at 2700 K), 800 lm (at 6500 K)
WLAN ..................................... IEEE 802.11 b/g/n, 2.4 GHz
RF output power ..................... 10 ± 2dBm
WLAN security ........................ WPA, WPA2, WPA/WPA2
WLAN range ........................... 30 m (line of sight)
Operating conditions .............. 0 to +40 °C, 10 – 90 % RH, non-condensing
Storage conditions .................. -10 to +70 °C, 5 – 90 % RH, non-condensing
Weight .................................... approx. 215 g
Dimensions (Ø x H) ................ 80 x 113 mm