Instructions

Intended use
Connect an electrical device to this wireless power outlet. The wirel-
ess remote control can be used to turn on and off the wireless power
outlet and the connected electrical device.
It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or mo-
dify this product. If you use the product for purposes other than those
described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, re, electric shock
etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requi-
rements. All company names and product names are trademarks of
their respective owners. All rights reserved.
Safety instructions
Read the operating instructions carefully and espe-
cially observe the safety information. If you do not fol-
low the safety instructions and information on proper
handling in this manual, we assume no liability for any
resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, ammable gases, vapours and
solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can
no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions
or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• Also observe the safety and operating instructions of any other de-
vices which are connected to the product.
• Do not use this product in hospitals or medical facilities. Although
the product sends only relatively weak radio signals, the signals
sent may still cause malfunction of life-support systems. The same
may also apply to other areas.
• Only use a properly installed power outlet of the public power supply
as a power source for the power outlet(s).
• This product is not a toy, keep it out of the reach of children. Use
extreme caution when children are present. Children may attempt
to insert objects into the wireless power outlet‘s openings. There is
a risk of lethal electric shock!
• The socket-outlet shall be installed near the equipment and shall
be easily accessible.
• Never touch the product with moist or wet hands. There is a risk of
lethal electric shock!
• Never connect two or more wireless power outlets in series.
• The wireless power outlet is entirely voltage-free only once it has
been disconnected from the power supply.
• Do not overload the wireless power outlet. Never exceed the
maximum permitted connected load as listed in technical data.
• Should the product housing be damaged, discontinue use of the
product immediately! If it is still connected to the power supply, do
not touch the wireless power outlet or any connected device(s)! First
disable the power outlet that the wireless power outlet is connected
to (ip the fuse or circuit breaker). Only now should you disconnect
the product from the power outlet. Take the product to a professional
workshop or dispose of it in accordance with environmental
regulations.
• Unplug the wireless power outlet for extended periods of disuse.
• For safety reasons, unplug the wireless power outlet in case of a
thunderstorm.
• Never use the product immediately after it has been brought
from a cold room into a warm one. The condensation generated
could destroy the product. This poses a risk of fatal injury due to
electric shock! Allow the device to reach room temperature before
connecting and using it. This may take several hours.
• Never pour liquids over electric devices and never place liquid-lled
objects near the product.
• Avoid use and storage near strong magnetic elds, such as in the
vicinity of machines or speakers.
Latest operating instructions
Download the latest operating instructions via the
link www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when the-
re is a potential risk of personal injury, such as electric
shock.
An exclamation mark in a triangle indicates important ins-
tructions in this operating manual that absolutely have to
be observed.
The arrow symbol indicates specic tips and advice on
operation.
Delivery content
• 2 x RSL wireless socket (item no. 1761751)
• RSL wireless socket switch mini (item no. 1762768)
• RSL wireless socket (item no. 1762776)
• Remote control (item no. 1761751 + 1762776)
• Battery CR2032 (item no. 1761751 + 1762776)
• Operating instructions
Operating instructions
RSL wireless socket switch set
Item no. 1761751
RSL wireless socket switch mini
Item no. 1762768
RSL wireless socket switch set
Item no. 1762776
• Consult an expert when in doubt about operation, safety or connec-
tion of the device.
• Maintenance, modications and repairs are to be performed exclu-
sively by an expert or at a qualied shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
b) Batteries
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for
a long period of time to avoid damage through leaking. Leaking or
damaged batteries might cause acid burns when in contact with
skin, therefore use suitable protective gloves to handle corrupted
batteries.
• Batteries must be kept out of reach of children. Do not leave batte-
ries lying around, as there is risk, that children or pets swallow them.
• Batteries must not be dismantled, short-circuited or thrown into
re. Never recharge non-rechargeable batteries. There is a risk of
explosion!
Operating elements
1
2
3
4
5
6
1 Power outlet
2 On/off switch incl. power indicator
3 Battery compartment lid
4 Indicator lamp
5 Control keys
6 Switching group selector
Inserting/replacing battery (remote control)
1. Remove the battery compartment lid (3) from the back of the
remote control.
2. Insert a new round cell battery, type CR2032, into the battery
recess. The positive pole must face up (see “+” imprint on the
battery). Push the battery into the battery recess until it stops.
3. Close the battery compartment.
Replace the battery when the remote control’s range
noticeably decreases or when the indicator lamp (4) no
longer lights up when a button is pushed.
Key functions (remote control)
• Use the switching group selector (6) to select one of four switching
groups. There are three channels available for each switching
group. The remote control thus has twelve channels in total.
• The control keys (5) are arranged in two columns:
- Left column = ON
- Right column = OFF
• Use the three upper keys of the left column to individually activate
channels 1 to 3.
• Use the three upper keys of the right column to individually deacti-
vate channels 1 to 3.
• Use the lower key ALL ON of the left column to simultaneously
activate channels 1 to 3.
• Use the lower key ALL OFF of the right column to simultaneously
deactivate channels 1 to 3.
The indicator lamp (4) ashes briey every time a button
is pushed.