Instructions

3. Intended use
This product is suitable for switching an electrical consumer on and off by radio signal controlled
by temperature. The electrical consumer can be switched on and off manually as well.
The temperature controller included in the set is operated with two AAA/micro batteries. The
temperature controller can be switched between heating and cooling mode, so that either
a heater or a cooler can be controlled. With 8 different switching programmes that work
independently of each other, switching times for a single day, for all weekdays (Monday - Friday)
orfortheentireweek(Monday-Sunday)canbespecied.
The receiver (radio switching socket) is intended for a consumer with a maximum power/current
consumption or 3500 W/15.2 A (resistive load) resp. 600 W/2.6 A (inductive load). The voltage/
current supply of the receiver takes place via a domestic mains socket (230 V/AC, 50 Hz).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Inaddition,improperusecancausehazardssuchasshortcircuiting,re,electricshocketc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
4. Delivery content
• RS2W wireless thermostat
• Wireless receiver
• AAA batteries
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
24