Instructions
Intended use
This remote controlled, wireless, outdoor switch is intended for turning
connected consumer loads on or off, either manually via a push button
on the device or via a suitable remote switch.
The wireless outdoor switch is suitable for use outdoors (IP44).
For safety and approval purposes, you must not rebuild and/or mo-
dify this product. If you use the product for purposes other than those
described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, re, electric shock
etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requi-
rements. All company names and product names are trademarks of
their respective owners. All rights reserved.
Safety instructions
Read the operating instructions carefully and espe-
cially observe the safety information. If you do not fol-
low the safety instructions and information on proper
handling in this manual, we assume no liability for any
resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, strong jolts, am-
mable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can
no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions
or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• Also observe the safety and operating instructions of any other de-
vices which are connected to the product.
• Check the product for damage before each use! If you notice any
damage, do not use the product any longer! There is a risk of a life-
threatening electric shock!
• If the product casing is damaged, do not use the product anymore!
When it is connected to the mains, do not touch the wireless out-
door switch or the connected device! First, switch off all the poles of
the mains socket whereto the wireless outdoor switch is connected
(turn off the circuit breaker and the FI protective switch). You can
then remove the wireless outdoor switch from the mains socket.
Take the product to a specialist workshop or dispose of it in an en-
vironmentally friendly way.
• Ensure that the insulation for the entire product is neither damaged
nor destroyed. Never disassemble the product! There are no servi-
ceable parts inside.
• Do not use this product in hospitals or medical institutions. Although
the product emits only relatively weak radio signals, these may lead
to the malfunction of life-support systems. The same may possibly
be the case in other areas.
• Keep the product away from strong magnetic elds occurring near
machines, electric motors or loudspeakers.
• The wireless outdoor switch is designed in accordance with pro-
tection class I. Only a standard mains socket (230 V/AC, 50 Hz
with protective earth) for the public supply grid may be used as the
power source for the remote controlled wireless outdoor switch. The
mains socket, into which the product will be inserted, must be easily
accessible.
• The mains socket, into which the product will be inserted, must be
easily accessible.
• Be especially careful when children are around. Children might try
to push objects through the socket openings, for example. There is
a risk of a lethal electric shock!
• The wireless outdoor switch is suitable for use outdoors (IP44).
• Never touch the product, or the mains plug, with wet or damp hands
when trying to connect a plug to the wireless outdoor switch. There
is a risk of a lethal electric shock!
• Never remove a mains plug from the mains socket on the front of
the wireless outdoor switch by pulling on the power cable. Always
hold the plug by the lateral grip surface to pull it out of the wireless
outdoor switch.
• Do not connect adapter pugs behind each other!
• The device is de-energized only when it is disconnected from the
mains socket.
Latest operating instructions
Download the latest operating instructions via the
link www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when the-
re is a potential risk of personal injury, such as electric
shock.
An exclamation mark in a triangle indicates important ins-
tructions in this operating manual that absolutely have to
be observed.
The arrow symbol indicates specic tips and advice on
operation.
Delivery content
• RSL wireless outdoor socket switch
• Screws
• Operating instructions
Operating instructions
RSL wireless outdoor socket switch
Item no. 1762772
• Do not overload the wireless outdoor switch (take note of the input
power in the technical data at the end of the operating manual!).
• Consult an expert when in doubt about operation, safety or connec-
tion of the device.
• Maintenance, modications and repairs are to be performed exclu-
sively by an expert or at a qualied shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
1 “ON/OFF/INDICATOR” button/LED
Using this button, the wireless outdoor switch can be activated
or deactivated manually. This button also serves as the program-
ming button.
2 Front socket for connecting a consumer load with
child-proof lock