Instructions

Intended use
This wireless light switch is intended for wirelessly turning on or off a
light bulb that is screwed into it, using a suitable radio remote switch.
The wireless light switch has a E27 light socket. Only screw in a light
bulb with a maximum output of 100 W.
It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or mo-
dify this product. If you use the product for purposes other than those
described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, re, electric shock
etc. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requi-
rements. All company names and product names are trademarks of
their respective owners. All rights reserved.
Safety instructions
Read the operating instructions carefully and espe-
cially observe the safety information. If you do not fol-
low the safety instructions and information on proper
handling in this manual, we assume no liability for any
resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight,
strong jolts, high humidity, moisture, ammable gases, vapours and
solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can
no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions
or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
• Also observe the safety and operating instructions of any other de-
vices which are connected to the product.
• The wireless light switch should only be used on a E27 socket with
a voltage of 230 V/AC, 50 Hz.
• Check the product for damage before use! If you notice any da-
mage, do not use the product any longer! There is a risk of a life-
threatening electric shock!
• If the product’s casing is damaged, do not use the product anymore!
In the event that it is still connected to a source of electrical power,
do not touch the product! First shut down all poles of the current
source (turn off automatic fuses/ fuses and FI protective systems)
and only after this unscrew the product from the lamp. Take the
product to a specialized repair shop or dispose of it in an environ-
mentally friendly way.
• Ensure that the insulation for the entire product is neither damaged
nor destroyed. Never disassemble the product! There are no servi-
ceable parts inside.
• Keep the product away from strong magnetic elds occurring near
machines, electric motors or loudspeakers.
• Be especially careful when children are around. Children could try
to insert items into the openings of the device. There is a risk of a
lethal electric shock!
• An all-pole disconnection from the mains voltage (such as a surge
protector) must be provided as part of the wiring set-up.
• The wireless light switch is only intended for use in dry indoor lo-
cations.
• Do not operate the product when it is covered. Ensure there is ade-
quate ventilation at the site of use.
• Never touch the light bulb you want to screw into the wireless light
switch with your hands, either during or after use (take note of the
cooling time stated by the light bulb manufacturer!). There is a risk of
burns and of a fatal electrical shock!
• Do not overload the wireless light switch (take note of the input pow-
er in the technical data at the end of the operating manual!).
• Consult an expert when in doubt about operation, safety or connec-
tion of the device.
• Maintenance, modications and repairs are to be performed exclu-
sively by an expert or at a qualied shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Latest operating instructions
Download the latest operating instructions via the
link www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when the-
re is a potential risk of personal injury, such as electric
shock.
An exclamation mark in a triangle indicates important ins-
tructions in this operating manual that absolutely have to
be observed.
The arrow symbol indicates specic tips and advice on
operation.
Delivery content
• RSL wireless lamp switch
• Operating instructions
Operating instructions
RSL wireless lamp switch
Item no. 1762773