Instructions

7. Connection and installation
 Toensurethatthedeviceisconguredcorrectly,
read these instructions and the safety information
carefullybeforerstuse.Incaseofdoubt,havethe
installation and connection performed by a special-
ist.
The connection may only be performed in a de-
energised/currentless state. Otherwise there is a
risk of a fatal electrical shock!
The power consumption of the connected loads
must not exceed the rated power of the built-in
switch. The minimum connection values must be
strictly observed. Please observe chapter “13.
Technical Data”.
The construction of the product corresponds to
protection-class II (double or reinforced insulation).
The product may therefore only be used for devices
(e.g.lightingxtures)withprotectionclassII.
The product is only suitable for devices operating
from the mains voltage.
38