Instructions
2Motion detection recording
• Adjust the recording mode switch (7) to the “M” po-
sition.
• Plug the security camera into the mains socket. The
security camera switches on; the LED indicator (3)
ashes red and blue simultaneously three times,
then turns off.
- If the security camera is not triggered by motion
to record video, the LED indicator (3) remains
on red.
- If the security camera is triggered by motion to
record video, the LED indicator (3) turns off from
red light. The recording continues until the set
time length is reached. See section “d). Change
settings” on how to set different time interval for
video recording.
- To switch the security camera off or on, press and
hold the multifunction button (4)forveseconds.
When the security camera is switched off, the LED
indicator (3) turns off.
48