Manual
6 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
6.1 General
This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous play-
thing for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modications and repairs must be carried out only by a skilled technician or
a specialist repair centre.
6.2 Handling
Please handle the product carefully. Impact, shocks or a fall even from a low height can
damage the product.
6.3 Operating environment
Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, ammable gases, vapours,
and solvents.
The weather station is suitable only for dry indoor areas. Do not expose the product to
direct sunlight, strong heat, cold, humidity or moisture; otherwise it may be damaged.
The outdoor sensor is designed for outdoor use. It must not be used in or under water, this
will destroy it.
Never switch the device on immediately after taking it from a cold into a warm environment.
This may cause condensation to form, which can destroy the product. Allow the product to
reach room temperature before using it.
Avoid using the product near strong magnetic or electromagnetic elds, transmitter aerials
or HF generators. Otherwise, the product may not function properly.
6.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
6.5 Power adapters
Never attempt to modify the electrical components of the power adapters for the
weather station and outdoor sensor. Risk of fatal electric shock!
Always ensure that the mains plug is properly connected.
Discontinue use of the device if any electrical components are damaged.
Do not modify the electrical components.
Connect the product to an easily accessible socket.
Only use the included power adapter.
Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power
adapter complies with the voltage of your electricity supplier.
Never connect or disconnect power adapters if your hands are wet.
For safety reasons, always disconnect the power adapter from the mains socket during
lightning storms.
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal
electric shock! Proceed as follows:
– First, cut off the power supply to the mains socket to which the power adapter is con-
nected (switch off the corresponding circuit breaker or remove the safety fuse, and
then switch off the corresponding RCD protective switch so that all poles of the mains
socket are disconnected).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged power adapter
again.
Make sure that the cable is not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them. Failure to do
so could result in injury.
Consult an expert when in doubt about the operation, safety or connection of the device.
A damaged product may only be repaired by the manufacturer, a workshop commissioned
by the manufacturer, or a similarly qualied person so as to prevent any danger.
Important Note
WLAN weather station with large TFT colour display
Item no. 2739814
1 Intended use
The weather station is used to display various readings, such as indoor/outdoor temperature
and humidity, air pressure, precipitation, wind speed, wind direction, UV index and light inten-
sity.
The data measured by the outdoor sensor are wirelessly transferred to the weather station.
Furthermore, the weather station calculates a weather forecast and displays it using graphical
symbols on the display.
In addition, you can register your weather station with various weather websites, such as
ecowitt.net, and operate it using the “VSView Plus” app. A free account is required to use the
app.
Readings can be stored on the product's micro SD card (max. 32 GB, not included) or trans-
ferred to a weather website.
When data is transferred to ecowitt.net, you can receive alerts via e-mail through the website.
The weather station is powered via the supplied USB power adapter and the dedicated USB
cable.
The outdoor sensor is powered via the supplied power adapter or the built-in solar cell. Two AA/
Mignon batteries are used as a backup power source.
The weather station is intended for indoor use only. Do not use it outdoors. Contact with mois-
ture must be avoided under all circumstances. The outdoor sensor has an IP44 protection class
and is thus suitable for outdoor use.
Using the product for purposes other than those described above may damage the product.
Improper product use can cause a short circuit, re, electric shock, other hazards.
This product complies with statutory, national and European regulations. For safety and ap-
proval purposes, you must not rebuild and/or modify the product.
Read the instructions carefully and store them in a safe place. Always provide these operating
instructions when giving the product to a third party.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
Android
TM
is a registered trademark of Google LLC.
2 Delivery content
Weather station
USB power adapter (weather station)
USB cable for power supply
Outdoor sensor
Power adapter (outdoor sensor)
10 m connection cable (outdoor sensor)
Operating instructions (digital as
download)
3 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
4 Operating instructions
You can download the complete user manual for the product from our downloads page. Please
refer to the previous chapter.
5 Explanation of symbols
The following symbols appear on the product/device or in the text:
This symbol warns of hazards that can lead to personal injury. Read the information
carefully.
This symbol warns of a dangerous voltage which can lead to injuries due to electric
shock. Read the information carefully.
The product should only be used in dry, indoor locations. It must not get damp or
wet.
The product is designed according to Protection Class II.
Pay attention to the operating instructions!