App Instruction Manual Smart Life - Smart Living Item No. 2106555 www.conradconnect.
Contents Introduction General Information Important Information Conrad Connect Legal Notice Requirements Network Connection Security Subnetting Mobile App Getting Started Installation/Deinstallation Install the App Notes on Deinstallation User Account Create a User Account Log In Home Page Main Controls
Add Device Camera View Functions Settings Change Device Name Low Battery Alarm Flip Screen Format MicroSD Remove Device Motion Detection Settings Push Notifications Troubleshooting
Introduction The connected device works through a WLAN network together with the “Smart Life” software. Motion sensors trigger push notifications to your mobile device, and any video recordings or live feeds can be accessed remotely. This mobile app allows you to control and manage all devices connected to your network. General Information Important Information Observe information in a red frame to avoid harming yourself or others, and prevent product damage.
Conrad Connect www.conradconnect.de Your product is compatible with the Conrad Connect IoT platform and is powered by Tuya. Device integration with Conrad Connect requires a Conrad Connect Account. You can set up an account at the given URL. Legal Notice This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g.
Requirements Network Connection Security It is strongly recommended that you set up your WiFi Router/WiFi Access Point (AP) to use the most secure encryption option it supports. Subnetting If you subnetted your network, the mobile device running the app and the devices of your smart network must be hosts on the same subnet.
Mobile App Getting Started As a first time user follow the below steps: 1. Install the App. 2. Create a User Account. 3. Log In. 4.
Installation/Deinstallation Install the App Apps are available for Android and iOS mobile devices. Head to the respective app store and download the app named 'Smart Life - Smart Living' onto your mobile device. Or scan the QR code shown. Make sure your mobile device satisfies the minimum requirements as outlined on the app store download page. Notes on Deinstallation When you remove the app, the settings are retained.
User Account Account settings are stored under your account in the cloud. Create a User Account A user account is required for you to operate the device. 1. Open the app. 2. Touch Register. 3. Register by email or mobile phone number. 4. Enter the requested details into the registration form and confirm with Get Verification Code. 5. A new account will be set up for you. Wait until you receive the confirmation for successful setup. Log In 1. 2. 3. 4. 5. Open the app. Touch Login with Existing Account.
Home Page The home page lists all devices that are under your account's control. When you log in for the first time, the device list is blank.
Add Device During set-up your mobile device and camera should be within receiving distance of the wireless access point (AP). The camera can only connect to the app using the Add Manually connection method. Make sure you know how to operate the camera hardware before you start. Refer to its hardware instructions if necessary. 1. Connect your mobile device running the app to your WiFi network. 2. Select Add Device > Security & Sensor > Smart Camera. 3. Select next step. 4.
Camera View From the "Home" screen, select a connected camera.
Functions Icon Description Record video Capture still image Microphone Single or 2-way audio Playback ■■ Standard Definition (SD): Use this setting if your bandwidth is low. SD / HD ■■ High Definition (HD): Use this setting for best recording quality. This setting will take up more memory space. This icon shows when the battery is USB or solar charging. The actual battery level shows when the battery is not being charged.
Settings Change Device Name 1. From the "Camera View" select ... then Device Name. 2. Enter a new device name. Low Battery Alarm Set an alert for when the camera battery level drops to a set percentage. 1. From the "Camera View" select ... > Power Management Settings > Set the low battery threshold. 2. Choose the desired percentage. Flip Screen If you have mounted your camera upside down, you will need to flip the screen. 1. From the "Camera View" select ... > Basic Function Settings > Flip Screen.
Remove Device The camera must be removed from your device before it can be used with another account. 1. From the "Camera View" select ... . 2. Then select Remove Device. Motion Detection Settings 1. From the "Camera View" select ... then PIR. 2. Adjust settings as needed. Push Notifications To receive notifications, notifications should be enabled in the app and through your mobile device notification settings. 1. From the "Home" view select Me > Settings > Push Notification. 2.
Troubleshooting App cannot connect to camera This may be due to a weak WiFi signal or an interrupted connection. ■■ Check that your internet connection is working correctly. Check cables, routers and connections. Restart network devices if necessary. ■■ Check that the camera is within range of your WiFi access point. Use of other 2.4 GHz products e.g. wireless networks and microwave ovens may cause interference. ■■ You may need to set up a wireless repeater to improve the connection.
