Instructions

Add Device
During set-up your mobile device and
camera should be within receiving distance
of the wireless access point (AP).
The camera can only connect to the app
using the Add Manually connection method.
Make sure you know how to operate the
camera hardware before you start. Refer to
its hardware instructions if necessary.
1. Connect your mobile device running the
app to your WiFi network.
2. Select Add Device > Security & Sensor >
Smart Camera.
3. Select next step.
4. Enter your WiFi access details then select
OK.
5. Select Continue, then use the camera to
scan the QR code on your mobile device.
The camera should be pointed towards the
QR code, approximately 15 to 20 cm away.
Hold it steady and wait for a beep to sound.
6. Select Heard the beep, then wait for
a connection to be made, then select
Completed.