Instructions
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualied technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and Operation
• The product‘s design complies with protection class I. Only an earthed mains so-
cket connected to the public power supply may be used as power supply to the
product.
• The mains socket into which the digital daily timer switch is inserted must be easily
accessible.
• The digital daily timer switch is equipped with a child safety lock. Only when the
pins of the power plug are placed in both openings of the front socket at the same
time will the child-lock mechanism release the opening.
Nevertheless, take special caution when children are around. Children cannot re-
cognise the danger arising from the incorrect use of electrical devices. There is a
risk of a life-threatening electric shock!
• The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet! Never place
the product in the direct vicinity of a bathroom, shower, bathtub or the like. Lethal
hazard due to electric shock!
• Use the product only in a temperate climate, never in a tropical climate.
• Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a danger of re and explosion!
• Never use the daily timer switch in a vehicle.
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The conden-
sation that forms might destroy the device. Moreover, there is danger of electric
shock! Allow the product to reach room temperature. Wait until the condensation
has evaporated. This might take several hours. Only after this should the product
be plugged into the power supply and put into use.
• Never pull out the power plug from the front socket of the digital daily timer switch
by pulling on its cable. Always pull the plug out of the front socket by gripping the
area provided for this purpose on its sides.
• Do not overload the daily timer switch. Observe the power rating in the chapter
„Technical Data“.
• Always pull the daily timer switch out of the mains socket before cleaning it or
when the device will not be in use for a long time.
• Never pour any liquids above or next to the product. You run the risk of causing a
re or a fatal electric shock.
If any liquid has still managed to enter the device, immediately turn off the power
supply to the mains socket at which the daily timer switch is connected (turn off
the fuse/circuit breaker/residual current operated circuit breaker of the associated
circuits). Only then can you unplug the daily timer switch from the mains socket
and contact a specialist. Do not use the product any longer.
• Do not connect in series! This can lead to an overload on the daily timer switch!
There is a risk of re!
• Do not operate while covered! At higher connected loads, the daily timer switch
becomes warm, which can lead to overheating and potentially a re if covered!
• Only voltage-free when the plug is unplugged!
• Never touch a daily timer switch that shows signs of damage, as this could cause
a fatal electric shock!
First, switch off the mains voltage to the socket to which the product is connec-
ted (switch off at the corresponding circuit breaker or remove the safety fuse or
switch off at the corresponding RCD protective switch, so that the socket is fully
disconnected).
Only then can you remove the daily timer switch from the mains socket. Do not use
the damaged daily timer switch any longer and dispose of it in an environmentally-
friendly manner.
Operating instructions
Digital daily timer switch
Item no. 1528594
Intended Use
The product is equipped with a power outlet which can be switched on and off via the integrated
timer. It can be operated and programmed via buttons and a LC display.
As a special feature, a blue backlight, which is used not only for better readability of the display,
but can also be used as a night light, can be activated for the LC display.
The product is only intended for use in dry indoor locations.
The product must be connected to an earthed mains socket. See chapter „Technical Data“ for
information on connection and the maximum permissible power consumption of the connected
electrical loads.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, you may inict damage on it. Further-
more, improper use involves risks such as short-circuits, re, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Digital daily timer switch
• Sticker set (type labels)
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol is used when specic tips and information on the operation are
provided.
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/materi-
al damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General Information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.