Operation Manual

49
9. Menu “USER SETTINGS”
• Briefl y push the “MENU” button (3) as described in chapter
8. b). The bottom-most display line shows “USER SETTINGS”.
• Use the “–” (5) and “+” (6) buttons to switch between “USER
SETTINGS” and “INSTALL SETTIGNS”.
Select „USER SETTINGS“ and then push the button “OK” (2).
• Then the buttons “–” (5) and “+” (6) can be used to select the
desired function (see following subchapters or short descrip-
tion in chapter 8. b).
• Confi rm the selection with “OK” (2).
• If you want to leave a function or the setting menu, push the
button “MENU” (3).
a) Function G1 “PROGRAM SELECT”
The universal thermostat has 3 independent memory slots for
switching times/temperatures.
If you want to use the universal thermostat alternatively in several
rooms, for example, you can store the switching times/tempera-
tures matching the respective room in memory slot 1, 2 and 3.
1. After selecting this function G1 “PROGRAM SELECT” and
confi rming with “OK” (2), the memory slot number (1, 2 or 3)
fl ashes in the display.
2. Select one of the 3 memory slots with the buttons “–” (5) and
“+” (6).
3. Confi rm the selection with “OK” (2).
The universal thermostat is then in the previous menu for se-
lection of functions again.
4. To leave the menu and return to the regular display, push the
button “MENU” (3), repeatedly if required.