Operation Manual

57
g) Function G7 “TEMP LIMITS”
You can set the lower and upper temperature limits for program-
ing in the function G2 here.
The limitation to the lower temperature range (e.g. only to
+5....+30 °C) accelerates programming. It is easy to programme
the wrong temperature here.
Proceed as follows:
1. After selecting this function G7 “TEMP LIMITS” and confi rm-
ing with “OK” (2), the value for the lower temperature limit
fl ashes in the display (display “TEMP MINLIMIT” at the bot-
tom of the display).
2. Set the lower temperature limit with the buttons “–” (5) and
“+” (6).
3. Confi rm the setting with “OK” (2).
The value for the upper temperature limit fl ashes in the dis-
play (display “TEMP MAXLIMIT” at the bottom of the display).
4. Set the upper temperature limit with the buttons “–” (5) and
“+” (6).
5. Confi rm the setting with “OK” (2).
The universal thermostat is then in the previous menu for
selection of functions again.
To leave the menu and return to the regular display, push the
button “MENU” (3), repeatedly if required.