Operation Manual

The home technology brand for the entire house. More information at www.sygonix.com

c) Function H3 “FROST PROTECT”

The function “FROST PROTECT“ is only available in heat-

ing mode (see chapter 10. a) or if the universal thermo-

stat was deactivated (see chapter 11).

Deactivate the function if you have set the lower tem-

perature limit in the function G7 “TEMP LIMITS” to a tem-

perature below +5.0 °C!

To protect a liquid-based heating from freezing, the frost-protec-

tion function can be activated (only available in heating mode,

see chapter 10. a).

The mains socket is activated independently of the set pro-

gramme if the temperature drops too far (temperature limit

between +5.0....+7.0 °C).

Proceed as follows:

1. After selecting this function H3 “FROST PROTECT” and con-

ﬁ rming with “OK” (2), either “OFF” or a temperature value

ﬂ ashes.

2. The buttons “–” (5) and “+” (6) can set the frost protection

function accordingly:

“OFF” = Frost protection function off

Temperature value “5.0 °C”....“7.0 °C” = temperature thresh-

old; the mains socket of the universal thermostat is deacti-

vated when this value is undercut

3. Conﬁ rm the setting with “OK” (2).

The universal thermostat is then in the previous menu for

selection of functions again.

To leave the menu and return to the regular display, push the

button “MENU” (3), repeatedly if required.