User manual

19
b) Selection of the operating function
Switch on the room thermostat. Push the button OK repeat-
edly until the desired operating function (manual mode;
frost protection function; AUTO mode; PROGRAMME mode)
is displayed.
c) Manual operation
Manual operation serves constant increase or reduction of
the room temperature. In manual mode, the symbol is
displayed. The factory setting for manual mode is 20 °C.
The temperature value set in the factory can be changed.
For this, push the button plus + or -.
Push and hold the plus + or minus - button of the tem-
perature setting. The temperature setting is now acceler-
ated.
The set temperature is kept until the mode is changed.
The device will then switch back to the factory setting of
20 °C.