User manual

21
e) PROGRAMME mode
Set the switching times and temperatures as described in
item “PROGRAMME setting”. Then switch the room thermo-
stat to PROGRAMME mode. The symbol “AUTO PROG” is
displayed.
The programmed temperature value can be changed manu-
ally for the current heating or reduction phase.
Briefly push the plus + or minus - button. The temperature
display will change from the current room temperature to
the set temperature.
Now push the plus + or minus - button to change the set
temperature for this switching period.
Push and hold the plus + or minus - button of the tempera-
ture setting. The temperature setting is now accelerated.
The set temperature is retained until a different mode is acti-
vated or the next heating or reduction phase is reached. The
device will then switch back to the programmed temperature
as described in item “PROGRAMME setting”.