SDS

ManualsBrandsSylvania ManualsFluorescent Tube Lights32-Watt 4 ft. Linear Tube T8 Fluorescent Light Bulb Cool White (12-Pack)

Table Of Contents

This data sheet covers fluorescent lamp types excluding compact fluorescent (integrated and pin-based).
Safeline lamps are encased in a Polyethylene Terephthalate (PET) heat shrinkable tubing manufactured by EncapSulite International Inc., Stafford, TX.

Page 1 of 3 Revision B November 12, 2019

SYLVANIA brand fluorescent lamps, manufactured by LEDVANCE, LLC, are exempted from the

requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200) and the Canadian Workplace

Hazardous Materials Information System (WHMIS) because they are “articles.” The following information is

provided by LEDVANCE, LLC as a courtesy to its customers.

---------------------------------------------------------------------------------------------------------------------------------------------------

I. IDENTIFICATION

---------------------------------------------------------------------------------------------------------------------------------------------------

Trade Name (as labeled):

SYLVANIA Fluorescent Lamps

This data sheet covers fluorescent lamp types excluding compact fluorescent

(integrated and pin-based).

Safeline lamps are encased in a Polyethylene Terephthalate (PET) heat

shrinkable tubing manufactured by EncapSulite International Inc., Stafford, TX.

Manufacturer:

LEDVANCE, LLC

100 Tyrone Pike

Versailles, KY 40383

859

-873-7351

Emergency Contact: EH&S Specialist 859-873-7351

---------------------------------------------------------------------------------------------------------------------------------------------------

II. HAZARD IDENTIFICATION

---------------------------------------------------------------------------------------------------------------------------------------------------

THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE

INTACT.

Hazard Category: 3

SPECIFIC TARGET ORGAN TOXICITY (Single exposure)

Signal Word: Warning

Hazard Statement: May cause respiratory irritation.

SAFETY DATA SHEET

Fluorescent Lamps

Summary of content (8 pages)

PAGE 1
SAFETY DATA SHEET Fluorescent Lamps SYLVANIA brand fluorescent lamps, manufactured by LEDVANCE, LLC, are exempted from the requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200) and the Canadian Workplace Hazardous Materials Information System (WHMIS) because they are “articles.” The following information is provided by LEDVANCE, LLC as a courtesy to its customers.
PAGE 2
Prevention: Avoid breathing dust if lamp is broken. Use only outdoors or in a well ventilated area. Response: If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a doctor if you feel unwell. Storage: Store broken lamp in well-ventilated place. Keep container tightly closed. Store locked up. Disposal: Dispose of contents in accordance with disposal laws.
PAGE 3
Carbonic Acid, Polymer with 4,4’-(1methylethylidene) bis (2,6-dibromophenol) and 4,4’-(1- methylethylidene) bis [phenol] Titanium Dioxide 32844-27-2 <.95 13463-67-7 <.95 These chemicals are subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372. (2) Limits as nuisance particulate. (3) These elements are contained in the material as part of its chemical structure; the material is not a mixture.
PAGE 4
All other components of this product do not pose a significant risk of respiratory and/or physical effects. --------------------------------------------------------------------------------------------------------------------------------------------------- IV. FIRST AID MEASURES: --------------------------------------------------------------------------------------------------------------------------------------------------Glass Cuts: Perform normal first aid procedures. Seek medical attention as required.
PAGE 5
Eye Protection: OSHA specified safety glasses, goggles or face shield are recommended if lamps are being broken. To avoid exposure to ultraviolet radiation, use only in enclosed equipment designed for this lamp type. Protective Clothing: OSHA specified cut and puncture-resistant gloves are recommended for dealing with broken lamps. Hygienic Practices: After handling broken lamps, wash thoroughly before eating, smoking or handling tobacco products, applying cosmetics, or using toilet facilities.
PAGE 6
Fluorescent Phosphor and cathodes may contain: (3) Barium Compounds (as Ba dust) (3) Magnesium (as dust) (3) Zinc (as dust) Fluoride (as F) Manganese (as dust) (3) (3) Tin (as dust) (3) Yttrium Oxide (as Y dust) (3) Antimony (as dust) Tungsten (as dust) Calcium (as dust) (3) (3) Europium (as dust) (3) Cerium (as dust) (3) Terbium (as dust) (3) Aluminum (as dust) (3) Strontium (as dust) --- 10.0 (2) 15.
PAGE 7
INTACT. No adverse effects are expected from occasional exposure to broken lamps. As a matter of good practice, avoid prolonged or frequent exposure to broken lamps unless there is adequate ventilation. The major hazard from broken lamps is the possibility of sustaining glass cuts. -------------------------------------------------------------------------------------------------------------------------------------XII.
PAGE 8
Emitting Diode (LED) retrofit lamps, retrofit kits and ballasts are compliant with the EU Directive 2011/65/EU per Annex III section 2(b)(4). EU Regulation No 1907/2006 (“REACH”) is a European Directive that has not be adopted in the US. A copy of our conformity letter for the EU is available. Furthermore, LEDVANCE LLC is in compliance with all state and provincial regulations that require manufactureroperated lamp recycling of mercury-containing lamps in the US and Canada.