Español Français English 26” LCD TV LC260SS2 EN Owner's Manual Need help? FR Manuel du Propriétaire Besoin d’aide? Please call toll free or visit our web site below Appelez notre numéro gratuit ou visitez notre site web à l’adresse ES Manual del Propietario ¿Necesita ayuda? Llame por favor sin costo ó visite nuestro sitio web en 1-866-321-3927 www. sylvaniaconsumerelectronics.com MODEL NUMBER SERIAL NUMBER © 2011 Funai Electric Co., Ltd.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
English FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Child Safety SYL Eme_Child Safety_1EMN24522_v1 1 2008/12/17 18:05:53
English Features Important Safety Instructions Trademark Information Child Safety INTRODUCTION Features Supplied Accessories Symbols Used in this Manual Attaching the Base Mounting the Unit on Your Furniture Remote Control Function Installing the Batteries Control Panel Terminals Cable Management PREPARATION Antenna Connection Connection to Cable Receiver or Satellite Box Plug In the AC Power Cord Initial Setup WATCHING TV Information Display (ATSC only) USING FUNCTIONS • Autoprogram • Child Lo
Supplied Accessories Attaching the Base Owner’s Manual You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction. At least 2 people are required for these steps. Quick Start Guide Registration card If you have any questions, please visit our website at www.sylvaniaconsumerelectronics.
English 1 2 1 12 13 14 ➠ ➠ p.12 p.13 4 PREV CH ➠ p.13 ➠ ➠ ➠ ➠ ➠ ➠ ➠ ➠ ➠ p.14 p.11 p.11 p.15 p.12 p.12 p.12 p.13 p.12 14 FORMAT ➠ p.13 15 ➠ p.14 ➠ ➠ ➠ p.14 p.13 p.22 Press to shift the subchannel from the main channel. 3 Press to return to previously viewed channel. 4 5 6 7 15 8 9 16 10 17 5 6 7 8 9 10 11 12 13 BACK OK ▲/▼/◄/►(cursor) MENU SAP VOL + / − MUTE SOURCE FREEZE Press to freeze screen image. Press to select aspect ratio available for the TV screen.
Control Panel 1 (power) ➠ p.11 ➠ p.13 ➠ ➠ p.15 p.12 Press to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power cord. 2 CH + / − Press to select channels or move up (+) / down (−) through the main menu items. 3 MENU 4 VOL + / − * 5 6 7 Press to adjust the volume up /down or move right (+) / left (−) through the main menu items. 5 Standby indicator Lights up red when the unit goes to standby mode.
English * 8 HDMI connection for HDMI or DVI device. When you connect your PC that has a DVI terminal, you can enjoy this unit as a PC monitor. 12 15 Component Video and Audio (L/R) Input jacks ➠ p.10,24 16 Digital Audio Output jack ➠ p.25 17 Analog Audio (L/R) Output jacks ➠ p.25 18 Analog Audio (L/R) Input jacks for HDMI 1 ➠ p.24, 25 Note for service terminal * Keep the cables through this holder to avoid tangling them.
PREPARATION Connection to Cable Receiver or Satellite Box No supplied cables are used with these connections: • Please purchase the necessary cables at your local store. Before you connect: Be sure your antenna or other device is connected properly before plugging in the AC power cord. Use an HDMI or Component Video cables to connect the HDMI or the Component Video Input jacks of the unit to the HDMI or the Component Video output jacks of the cable receiver / satellite box.
English 4 Use ◄/► to select the desired location setting, then press OK. [Home] is ENERGY STAR® qualified setting. Initial Setup Initial Setup Select “Retail” or “Home” for your location. PREPARATION This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes viewable channels. Home Retail Before you begin: Make sure the unit is connected to antenna or cable.
WATCHING TV Freeze Mode can freeze the image shown on the TV screen for 5 minutes. Press FREEZE to freeze the image. Freeze • The sound output will not be paused. • To cancel freeze mode, press any buttons except y. Sleep Timer can set the unit to go into standby mode after an incremental period of time. Press SLEEP repeatedly to change the amount of time (increases Sleep the time by 30 minutes up to 120 minutes). Press SLEEP once to call up the display for checking the remaining time.
English devices when they are connected to the unit. Press SOURCE or CH + repeatedly to cycle through the input modes. Source e.g.) 11.1 Video Component HDMI1 DTV /TV channel HDMI2 HDMI3 (or PC input) • Pressing CH − reverses the direction of the input modes. TV Screen Display Mode 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.
TV Screen Information Reducing the Brightness You can display the currently selected channel or other information such as the audio mode on the TV screen. In the digital mode, the detailed broadcasting information for the current off the air channel such as program title and program guides are displayed. Backlight brightness can be reduced which may save on power consumption more than you just set [On] in [Energy Saving Mode].➠ p. 22 1 ECO once to reduce the brightness.
English INTRODUCTION USING FUNCTIONS This section describes the overview of the main menu displayed when you press MENU. The main menu consists of the function setting items below. Press MENU to display the main menu. 2 Use ▲/▼ to select a desired menu and an item, then press OK to determine the setting. Page 16 Adjusting the picture mode, or customize the picture quality as your preference. Sound Setup Language Page 16 Adjusting the sound mode, equalizer and some other sound functions.
Picture Sound Before you begin: Before you begin: You must set [Home] in [Location]. ➠ p.23 Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode. You must set [Home] in [Location]. ➠ p.23 Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode. 1 Use ▲/▼ to select the item you want to adjust, then press OK. 1 Use ▲/▼ to select the item you want to adjust, then press OK.
English Autoprogram Select the audio output from the unit’s speakers, or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure [fun-Link Control] is set to [On]. ➠ p.22 If you switch wires (e.g.
Channel List Antenna Confirmation The channels selected here can be skipped when selecting the channels using CH + / −. Those channels can still be selected with the Number buttons. This function lets you check the digital signal strength of each channel. 1 2 1 2 Use ▲/▼ to select [Channel List], then press OK. Use ▲/▼ to select the channel you want to remove, then press OK. ATSC Use ▲/▼ to select [Antenna], then press OK.
English Sound Caption Service Off Digital Caption Service Off Caption Style Setup A ATSC B C You can change the caption style such as font, color or size, etc. Features Use ▲/▼ to select [Caption Style], then press OK. Use ▲/▼ to select [User Setting], then press OK. Use ▲/▼ to select [On], then press OK. Use ▲/▼ to select an item, then press OK. Then use ▲/▼ to select the desired setting and press OK. Picture display OK. CC-1 and T-1 The primary caption and text services.
Note Child Lock • Closed caption will not be displayed when you are using an HDMI connection. • To show the closed caption on your TV screen, broadcast signal must contain the closed caption data. • Not all TV programs and commercials have the closed caption or all types of the closed caption. • Captions and texts may not exactly match the TV voice. • Changing channels may delay the closed caption for a few seconds. • Adjusting or muting the volume may delay the closed caption for a few seconds.
English US TV Ratings Lock Picture X NC-17 Sound R PG-13 Setup FV Sound TV-MA Setup TV-PG TV-Y7 TV-Y Language Select Rating View / Block Back Select Sub Rating Category V Violence R Restricted; under 17 requires accompanying parent or adult guardian S Sexual Situation L Coarse Language PG-13 Unsuitable for children under 13 D Suggestive Dialog PG Parental guidance suggested G General audience NR No rating US TV Ratings Lock FV Setup TV-PG V S L D TV-14 TV-G TV-Y
Device Control fun-Link (HDMI CEC) This function allows you to operate the linked functions between our brand devices with a fun-Link feature and this unit connecting through an HDMI cable. 1 Use ▲/▼ to select the desired setting, then press OK. Use ▲/▼ to select [fun-Link (HDMI CEC)], then press OK.
English When you select [Retail] store, the power consumption may possibly exceed the limited requirement of the ENERGY STAR® qualification. Use ▲/▼ to select [Location], then press OK. Use ▲/▼ to select the desired location, then press OK. The unit will be set up with predefined settings for retail displays. In this setting, the power consumption may possibly exceed the limit requirement of the ENERGY STAR® qualification. Home This setting is ENERGY STAR® qualified.
CONNECTING DEVICES Note • Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the better compatibility. For HDMI connection (use HDMI 1, 2 or 3 Input jack) No supplied cables are used with these connections: • Please purchase the necessary cables at your local store. Before you connect: Be sure other device is connected properly before plugging in the AC power cord.
English Composite Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Composite video Input jack, connect audio cables to the Audio L/R input jacks right above the Composite video connector. When the Audio is monaural, then only connect to the Audio L Input jack. Analog Audio Output Connection (for both analog and digital broadcasting) If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio.
USEFUL TIPS FAQ Question Answer • • • • My remote control does not work. • What should I do? • • • • How come the Initial setup appears every time I turn on this unit? Why can I not watch some RF signal TV programs. Check the antenna or cable connection to the main unit. Check the batteries of the remote control. Check if there is an obstacle between the infrared sensor window and the remote control. Test the signal output use [IR Signal Check]. ➠ p.28 If okay, then possible infrared sensor trouble.
English Remedy • • • • • • • • • • • • Adjusted [Picture] or [Sound] settings are not effective every time • the unit is turned on. • You see a distorted picture or hear an unusual sound. • • • • Electrical interference from nearby appliances may affect picture quality. Adjust [Contrast] and [Brightness] in the main menu. View other TV channels. The problem might be limited to the broadcasting station or weak signal strength. For the best picture quality, watch "High Definition" wide screen programs.
INFORMATION Glossary Maintenance ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
English Terminals Electrical Specification Operating temperature Antenna Input VHF / UHF / CATV Audio Input RCA jack (L/R) x 6 CompositeVideo Input RCA jack x 1 S-Video Input Mini DIN 4pin jack x 1 Component Video Input RCA jack x 3 HDMI Input HDMI 19 pin x 3 Digital Audio Output (coaxial) RCA jack x 1 Analog Audio Output RCA jack (L/R) x 2 75 Ω unbalanced (F-type) 500mV rms 1 V p-p (75 Ω) Y 1V p-p (75 Ω) C 286 mV p-p (75Ω) Y Pb/Cb Pr/Cr 1V p-p (75 Ω) 700 mV p-p (75Ω) 700 mV p-p (75Ω) 500 mV p-p (75
English WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth below. to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.
I License This section describes software license used for this product. This product uses some open source software: GPL software: liba52.c, scalfact.c jpeglib.h FreeType GPL GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
II Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
III NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.