Manual

ManualsBrandsSylvania ManualsVCR6240VE

SYLVANIA i,yeoneedaddi alope aO aeeie*anceafteri

reading this owner's manual or to order replace- II •

- r_sories, pleasecall ' II "

TOLLFREE:1-8'0o-ese-z42eIli

or visit our web site at http://www.funaFcorp.com II •

1. Before using your VCR

Owner's ManNam

Video Cassette Recorder

"!""-',,1'""_,,,,,_ (Back of TV

mfcharmed 3 is already occupied for broadcasting, Hint

1) Set your TV to channel 4 ............................. ,,,,,,,,

2) Insert a pre-recorded tape into the VCR. . The RFoutput channel may

not change when you adjust

3) Press the PLAY button once. tracking during playback. In

4) After a few seconds, press the PLAY button on the VCR for 3 seconds, this case, stop the playback,

" The RF output channel will change to channel 4 from channel 3 and you will and start the playback again.

see a playback picture. After that, press the PLAYbut-

ton on the VCR for 3seconds

When a picture does not appear on the TV screen, repeat step [4]. again.

5) Press the STOP button to stop playback.

Cable A_na =_Back of VCR)

Signal

= or

RF Cable (supplied)

(Back

Plug the AC power cords of the VCR and TV into the AC outlets.

You can use the AUDIO OUT jack and

VIDEO OUT iack on the back of the

VCR if your TV has AudioNideo Input

iacks. In this case, you need to set the

TV to external Line Input Mode. Please

refer to your TV's owner's manual.

Select this connection when you want to view or record a

scrambled channel. With this connection, channelscannot

be changed on theVCR. Youcan view or record ONLYthe

channels you have selectedon the cable box or the satellite

box.

• While you are recording, only the recorded channel can

be viewed.

To select channels of the cable box or satellite box

1)Turn on the VCR by pressing the POWER button, and

then, press the VCR/TV button.The POWER and the

VCR/TV indicators on the front panel will light on. Then,

press the CHANNEL buttons to select channel 3 or 4

(the same channel as the output channel d the cable

i Select this connection when you want to change channels

i on the VCR. With this connection, you may watch one

:"channel while recording another.

i •You may not view or record a scrambled channel.

.:To select channels of the cable box or satellite box

i 1)At the cable box or satellite box, select channel 3 or 4

:" (the same channel as the VCR's RF output channel.)

i • Refer to "RF Output Channel".

i 2)At the TV, select the same channel as the output chain

nel (3 or 4) of the cable box or satellite box.

i 3)Turn on the VCR by pressing the POWER button, and

:" then, press the VCR/TV button .The POWER and

box or satellite box). i VCR/TV indicators on the front panel will light on.Then,

• If you use the channel 4, you need to change the VCR's i select the channel you want to view or record.

RF output to channel 4. Refer to "RF Output Channel". i To play back a tape

2) At the TV, select channel 3 or 4 (the same channel as i Follow the steps 1) to 2) above. Then, play back a tape.

you have selected at step 1). _• Refer to "Playback" on page 5.

3) At the cable box or satellite box, select the channel you i To view one channel while recording another

want to view or record. ! 1)While you are recording on theVCR, press theVCR/TV but*

:" ton so that the VCR/TV indicator disappearson theVCR.

i 2)At the cable box or satellite box, select the channel you

want to view.

(Back of TV)

(not sup?lied)

(Back of VCR)

Install two AA batteries

/z'b..

(supplied) matching the _" .'-_ .">_

polarity indicated e

the bottom of the

remote control. -,.4_

Printed in China

0VMN03900/HF310UD *****

• Remote control • RF Cable • Owner's Manual

(NA371UD)with (WPZ0901TM002) (0VMN03900)

TwoAA batteries

AUDIO OUT jack AUDIO IN jack

Connect the audio cable to the audio in jack Connect the audio cable from the audio out

efacamcorder, anotherVCR, asteree _ [_jackofacamcerder anetherVCR oran

amplifier, or an audio system, i I /audiosource.

[8'1 _Ul__ f I._ool (_o'. Connect your antenna or cable box.

i _ _, d ;_ ".* ANT OUT jack

_tj L, _ Connect the RF cable (supplied) to

• I_,o_o/ '"__:_--;_theantenna n utjackon ourTV

.................. P Y •

VIDEO OUT jack _ /

Connect the video cable to the video in jack / VIDEO IN lack

of a camcorder, another VCR, or a TM / Connect th'e video cable from the video out

/ jack of a camcerder, anotherVCR or an

audio-visual source aser disc player,

vioeo disc 3layer, etc.).

Summary of content (8 pages)

PAGE 1
SYLVANIA Owner's Video i,yeo need addi ope al aO aeeie*ance afteri reading ManNam Cassette - this owner's r_sories, manual or to order pleasecall replace' TOLL FREE:1-8'0o-ese-z42e IIIli• 3) Recorder or visit our web site at http://www.funaFcorp.com 4) " 1. Before using your VCR Cable Signal = or "!""-',,1'""_,,,,,_ (Back A_na [1 Hint mfcharmed 3 is already occupied for broadcasting, II • 1) Set your TV to channel 4 .............................
PAGE 2
. mmportant Safeguards I WARNING: To #0 REDUCE NOT EXPOSE THERISK THIS APPLIANCE OFFIREORELECTRIC TO RAIN OR SHOCK, MOISTURE, The lightning flash with arrowhead syrnbo_, within an equi_atera_ triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" ,within the product's enclosure that may be of sufficient magnitude to constitute a risk of e_ectrie shock to persons.
PAGE 3
. Preset for Use To Select a Channel -MENUV You can select a channel by directly pressing the Number buttons on the remote control. on the TV and set Iilf_ channel 3. I• If channel 3 is already occupied for broad[ casting, see"RF Output Channel" section. IPOWER emote Co_}o TV Screen LANGUAGE SELECT "\l ' II STOP L PLAy I_,- [1_ ENGLISH [ON] FRANCAIS Notes tons: for using the Number • • When selecting cable channels which are higher than 99, enter channel numbers as a three-digit numbe
PAGE 4
. Precautions Install Location For safety and optimum performance of ,our VCR: Install the VCR in a horizontal and stable position. Do not place anything directly on top of the VCR. Do not place the VCR directly on top of the TV. Shield it from direct sunlight and keep away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of th_ VCR.
PAGE 5
. Playback 7. Other Operations Before: Turn on the TV and set it to channel 3. • If channel 3 is already occupiedfor broadcasting,see "RF Output Channel"section. To cue or review picture during playback (Picture Search) Press the F.FWD or REW button. • Press it again and the VCR will now search in super high speed. (in the LP/SLP modes only) To play back in slow motion Press the SLOW button during playback or the still mode.
PAGE 6
9. Recording Features ,,Insert a tape with its record tab into the VCR. the desired our) _- TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT __ • If there is a power failure or the VCR has been unplugged for more than 30 sec- mSlOP PLAY_ the clock setting and all timer settings will be lost.
PAGE 7
t0. Special Features You can specify the time for fast forwarding or rewinding. You can specify the number of programs to be skipped. You can repeat playback of a whole tape automatically. ,, Insert a tape into the VCR. ,, Insert a tape into the VCR. • Insert a tape into the VCR. /_ ....... ,. -MENUi_ AUTO REPEAT [OFF] CHANNEL SET UP TIMER PROGRAMMING CLOCK SET LANGUAGE SELECT .......
PAGE 8
11. information Funai Corporation will exchange is option, in the event of defect ship as follows: EXCHANGE 1-90 DAYS: or repair this product, al in materials or worKman- DURATION: FUNAI CORPORATIOh for a new unit withou[ wJJJ excnange charge for a De n- od of ninety (90) days from original retail purcnase. 91-365 DAYS: FUNAI CORPORATION for a factory-ser\ unit for a charge the date will of excnange ce-io-new-eonaliion of a retallel3 price unit for the period of ninety one (91) days io three