Manual
SYLVANIA younoodadditiona,oporatingassistanceafter
reading this owner's manual or to order replace-
ment accessories, please call
Owner's ManuaJ TOLL FREE : 1-800=968-3429
Video Cassette Recorder or visit our web site at
6260VF http://www.SylvaniaConsumerElectronics.com
o
1. Before Using Your VCR .
if channel 3 is already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Hit [PLAY I_] once.
4) After a few seconds, hold [PLAY _] on the unit for 3 seconds.
• The RF output channel will change to channel 4 from channel 3 and you
will see a playback picture.
. When a picture does not appear on the TV screen, repeat step 4)=
5) Hit [STOP l] to stop playback.
•The RFoutput channel may
not change when you adjust
tracking during playback. In
tNs case, stop the playback,
and start the playback again.
After that, hold [PLAY _] on
he VCR for 3 seconds again.
Antenna
iiiii_
[_ Plug the AC power cords of the VCR and TV into the AC outlets.
You can use the AUDIO OUT jacks
and VIDEO OUT jack on the back of
the VCR if your TV has Audio/Video
Input jacks. In this case, you need to
set the TV to external Line Input
Mode. Please refer to your TV's
owner's manual.
(Back of TV)
(not 8up£Ned)
(Back of VCR)
Select this connection when you want to view
or record a scrambled channel. With this con-
nection, channels cannot be changed on the
unit.You can view or record ONLY the chan-
nels you have selected on the cable box or
the satellite box.
• While you are recording, only the recorded
channel can be viewed.
To select channels of the cable box or
satellite box
1) Turn on the unit by hitting [POWER], then
hit [VOR/TV].The "POWER" and the
"VCR/TV" indicator on the front panel will
appear, then press [CHANNEL A/V ] to
select channel 3 or 4 (the same channel as
the output channel of the cable box or
satellite box).
• If you use the channel 4, you need to
change the unit's RF output to channel 4.
Refer to "RF Output Channel".
2) At the TV, select channel 3 or 4 (the same
channel as you have selected at step 1).
3) On the cable box or satellite box, select the
channel you want to view or record.
• Remotecontrol • RF cable
(NA376UD)with (WPZ0901TM002)
two AA batteries
•Owner's manual
(1VMN20688)
Install two AA batteries
(supplied) matching the
polarity indicated on
the bottom of the
remote control.
Printed in China
1VMN20688 / HJ411UD -k_-_