Video Cassette Recorder Owner's Manual 6260VF

ManualsBrandsSylvania ManualsVCR6260VF

- 1 -

Select this connection when you want to view

or record a scrambled channel. With this con-

nection, channels cannot be changed on the

unit. You can view or record ONLY the chan-

nels you have selected on the cable box or

the satellite box.

• While you are recording, only the recorded

channel can be viewed.

To select channels of the cable box or

satellite box

1) Turn on the unit by hitting [POWER], then

hit [VCR/TV].The “POWER” and the

“VCR/TV” indicator on the front panel will

appear, then press [CHANNEL ] to

select channel 3 or 4 (the same channel as

the output channel of the cable box or

satellite box).

• If you use the channel 4, you need to

change the unit’s RF output to channel 4.

Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same

channel as you have selected at step 1).

3) On the cable box or satellite box, select the

channel you want to view or record.

If channel 3 is already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Hit

[PLAY

] once.

4) After a few seconds, hold [PLAY

] on the unit for 3 seconds.

•

The RF output channel will change to channel 4 from channel 3 and you

will see a playback picture.

•

When a picture does not appear on the TV screen, repeat step 4).

5) Hit [STOP

] to stop playback.

You can use the AUDIO OUT jacks

and VIDEO OUT jack on the back of

the VCR if your TV has Audio/Video

Input jacks. In this case, you need to

set the TV to external Line Input

Mode. Please refer to your TV’s

owner’s manual.

Owner’s Manual

Video Cassette Recorder

6260VF

1VMN20688 / HJ411UD ★★★★★

Printed in China

ANT

AUDIO

VIDEO

OUT

OUT IN

OUT

ANT

AUDIO

VIDEO

OUT

OUT IN

OUT

AUDIO IN jacks

Connect the audio cables coming from the

audio output jacks of a camcorder, another

VCR or an audio source here.

VIDEO IN jack

Connect the video cable coming from the

video output jack of a camcorder, another

VCR or an audio-visual source (laser disc

player, video disc player, etc.) here.

AUDIO OUT jacks

Connect the audio cables here through to the audio

input jacks of a camcorder, another VCR, a stereo

amplifier, a stereo amplifier or an audio system.

ANT IN jack

Connect your antenna or cable box here.

ANT OUT jack

Connect the supplied RF cable to the

antenna input jack on your TV.

Front & Rear Terminals

Stereo TV Connection

ANT

OUT

AUDIO

ANT

OUT

VIDEO

OUT

INOUT

Audio/Video Cables

(not supplied)

AUDIO OUTVIDEO

OUT

AUDIO INVIDEO

(Back of TV)

(Back of VCR)

• Remote control

(NA376UD) with

two AA batteries

• RF cable

(WPZ0901TM002)

• Owner’s manual

(1VMN20688)

Supplied Accessory

Installing the Batteries for

the Remote Control

Install two AA batteries

(supplied) matching the

polarity indicated on

the bottom of the

remote control.

Hint

• The RF output channel may

not change when you adjust

tracking during playback. In

this case, stop the playback,

and start the playback again.

After that, hold

[PLAY

]

the VCR for 3 seconds again.

VIDEO OUT jack

Connect the video cable here through the video

input jack of a camcorder, another VCR or a TV.

RF Output Channel

MENCHANNEL

POWER

VIDEO L - AUDIO - R

TAPE IN

TIMER

VCR/TV

REC

1. Before Using Your VCR

ANT

OUT

RF Cable (supplied)

(Back of VCR)

(Back of TV)

Plug the AC power cords of the VCR and TV into the AC outlets.

Disconnect

Antenna

Connect

Antenna

Cable TV

Signal

Cable TV

Signal

Basic TV Connection

Hint for Cable Box or Satellite Box

ANT

OUT

RF cable

(supplied)

(Back of VCR)

OUT

(Back of TV)

Antenna or

Cable TV

signal

(Cable box or

Satellite box)

If you need additional operating assistance after

reading this owner’s manual or to order replace-

ment accessories, please call

TOLL FREE : 1-800-968-3429

or visit our web site at

http://www.SylvaniaConsumerElectronics.com

HJ411UD.QX33 05.3.8 13:09 Page 1

Summary of content (8 pages)

PAGE 1
HJ411UD.QX33 05.3.8 13:09 Page 1 RF Output Channel If you need additional operating assistance after reading this owner’s manual or to order replacement accessories, please call Owner’s Manual Video Cassette Recorder If channel 3 is already occupied for broadcasting, 1) Set your TV to channel 4. 2) Insert a pre-recorded tape into this unit. 3) Hit [PLAY B] once. 4) After a few seconds, hold [PLAY B] on the unit for 3 seconds.
PAGE 2
HJ411UD.QX33 05.3.8 13:09 Page 2 2. IMPORTANT SAFEGUARDS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The caution marking is located on the rear of the cabinet.
PAGE 3
HJ411UD.QX33 05.3.8 13:09 Page 3 3. Preparation for Use Turn on the Unit for the First Time To Select a Channel 1 Turn on the TV and set it to channel 3. • If channel 3 is already occupied for broadcasting, see “RF Output Channel” section. 2 POWER Remote Control TV Screen LANGUAGE SELECT B ENGLISH PLAY STOP [ON] FRANCAIS You can select a channel by using the Number buttons on the remote control.
PAGE 4
HJ411UD.QX33 05.3.8 13:09 Page 4 4. Precautions Precautions Install Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation.
PAGE 5
HJ411UD.QX33 05.3.8 13:09 Page 5 5. Playback 7. Other Operations Before: Turn on the TV and set it to channel 3. 2 Remote Control 4 TV Screen EJECT VCR /TV 1 2 3 4 5 6 CHANNEL 7 8 9 SEARCH -MODE CHANNEL PLAY PLAYB POWER Hit [F.FWD g] or [REW h]. • Hit it again and the VCR will now search in super high speed. (in the LP/SLP modes only.) POWER • If channel 3 is already occupied for broadcasting, see “RF Output Channel” section.
PAGE 6
HJ411UD.QX33 05.3.8 13:09 Page 6 9. Recording Features Timer Recording Hints for Timer Recording •Insert a tape with its record tab into the unit. 1 -MENU- 5 B TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT TV STEREO [ON] TIMER PROGRAMMING SAP MENU PROG 12345678 DATE START TIME END TIME Available program CHANNEL number flashes. Select the desired start time (hour). STOP PLAY or F.
PAGE 7
HJ411UD.QX33 05.3.8 13:09 Page 7 10. Special Features Time Search Index Search You can skip the program backward and forward by the Index Mark. • Insert a tape into this unit. 1 INDEX SEARCH SEARCH Auto Repeat You can search backward and forward a spcific length of time on a tape. • Insert a tape into this unit. 1 –– -MODE TIME SEARCH SEARCH –:–– -MODE 11.
PAGE 8
HJ411UD.QX33 05.3.8 13:09 Page 8 12. Information Maintenance Limited Warranty Funai Corporation will exchange or repair this product, at THIS WARRANTY DOES NOT COVER PACKING its option, in the event of defect in materials or workman- MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL UNITS), ANY COSMETIC PARTS, COMship as follows: PLETE ASSEMBLY PARTS, DEMONSTRATION OR EXCHANGE DURATION: FLOOR MODELS.