T5204/7204 w/BCV 01.1.29 6:52 PM Page 1 OWNER’S MANUAL COLOR TV/VCR 6313CCB 6319CCB (13 inch) (19 inch) This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-287-4871.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 3 F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 4 PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 5 TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .4 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . .
T5204/7204 w/BCV 01.1.29 6:52 PM Page 6 FEATURES • Infrared remote control • Bilingual on screen menu display selectable in • • Zero Return–The tape returns to counter of • English or French Real time counter–This shows the elapsed record- ing or playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 7 VIDEO CASSETTE This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE • Avoid moisture. Moisture condensation may occur Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 8 OPERATING CONTROLS AND FUNCTIONS This manual covers 13" and 19". The operation of the two models are exactly the same except the appearance. 19" model is illustrated in this manual. NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 9 - REAR VIEW - ANT. 26 27 7 F.FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward during playback mode. (Forward Search) B button– • When setting program (for example: setting clock or timer program), press to determine your selection and proceed to the next step you want to input. • Press to determine setting modes from on screen menu. • Press to select a mode from a particular menu.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 10 PREPARATION FOR USE VHF/UHF SEPARATE ANTENNAS ANTENNA/CABLE CONNECTIONS In some areas it will be necessary to use an outdoor antenna. VHF/UHF COMBINED ANTENNA VHF Antenna (Not supplied) The VHF/UHF Rod Antenna (supplied with 13 inch model only) is detachable. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 11 CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 12 SET UP FOR USE You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 13 CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button. 2 Begin auto preset Press the PLAY/K or STOP/L button to point to “AUTO PRESET”. Then, press the F.FWD/B button. The tuner scans and memorizes all the active channels in your area.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 14 CLOCK SET UP (AUTO / MANUAL) 2 Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SETTING”. If it is not, follow “MANUAL CLOCK SETTING”. You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 15 MANUAL CLOCK SETTING Make sure ... • TV/VCR power must be turned on. 1 6 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 16 ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: • Counter mode: After 5 seconds, only • OFF mode the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 17 TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 18 CLOSED CAPTION SYSTEM 1 You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 19 V-CHIP SET UP V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program’s rating meets the limitations you select. In this case, “PROTECTED PROGRAM by ...” message appears on the TV screen.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 20 MPAA RATING SET UP Make sure ... • TV/VCR power must be turned on. 1 Select “V-CHIP SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “V-CHIP SET UP”. Then, press the F.FWD/B button. 2 Select “MPAA RATING” Press the PLAY/K or STOP/L button to point to “MPAA RATING”. Then, press the F.FWD/B button.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 21 PLAYBACK 2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal. 3)Press the PLAY button to return to normal speed. NORMAL PLAYBACK Make sure ... • TV/VCR power must be turned on.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 22 SPECIAL PLAYBACK Make sure ... • TV/VCR power must be turned on. • Insert a prerecorded tape. • Before playback, follow steps below. AUTO REPEAT PLAYBACK RENTAL PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Set “RENTAL” to [ON] Press the PLAY/K or STOP/L button to point to “RENTAL”. Press the F.FWD/B or REW/s button until [ON] appears.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 23 SEARCH Make sure ... • TV/VCR power must be turned on. • Insert a tape. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Insert a tape. 2 Select “TIME SEARCH” mode Press the TIME SEARCH button (with each push it will increase by 10 minute). OR Press the MENU button on the remote control.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 24 RECORDING Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONLY record and view the same channel. SKIPPING UNWANTED SCENES DURING RECORDING NORMAL RECORDING You can ONLY watch the same TV program that is being recorded.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 25 OTR (One Touch Recording) This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR. Make sure ... • TV/VCR power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This function CANNOT be done from the remote control.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 26 TIMER AUTOMATIC TIMER RECORDING You may set the TV/VCR to start and end a recording while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 6th, 2001 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure ... • If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel.
T5204/7204 w/BCV 5 01.1.29 6:52 PM Page 27 Set beginning hour Press the PLAY/K or STOP/L button until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then, press the F.FWD/B button. 6 Set end hour Press the PLAY/K or STOP/L button until the desired hour appears. (Example: “8, PM” for 8:50PM) Then, press the F.FWD/B button. 8 Set end minute Press the PLAY/K or STOP/L button until the desired minute appears. (Example: “50” for 8:50PM) Then, press the F.FWD/B button.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 28 TO CHECK THE BEGIN/END TIME 3 1)Press the POWER button so that the REC indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of programs appear on the TV screen. 5)Press the MENU button on the remote control to return to TV mode. • Make sure the channel you want to record is prop- • • • • • erly set in advance.
T5204/7204 w/BCV 3 01.1.29 6:52 PM Page 29 1 Set wake up time Press the PLAY/K or STOP/L button until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes. WAKE UP TIMER ON/OFF TV/TAPE B TIME Select “SLEEP TIMER” Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears. 2 [ON] [TV] [12:00AM] Set sleep time Press the PLAY/K, STOP/L, F.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 30 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No picture but the audio is OK in playback. CORRECTIVE ACTION Make sure the AC cord is connected to an AC outlet. • Make sure the power is turned on. • • Make sure the AC cord is connected to an AC outlet.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 31 SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 13/19 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
T5204/7204 w/BCV 01.1.29 6:52 PM Page 32 SYLVANIA HOME ENTERTAINMENT WARRANTY We appreciate your purchase of a SYLVANIA Home Entertainment product. We take pride in the quality of our products and have manufactured your new Home Entertainment unit to exacting quality standards. We feel confident that in normal use, it will provide you with satisfactory performance. However, should you experience difficulty, you are protected under the provisions of this warranty.
T5204FR.QX33 01.1.29 6:54 PM Page 1 GUIDE D’UTILISATION TÉLÉVISEUR COULEUR/MAGNÉTOSCOPE 6313CCB 6319CCB (13 POUCES) (19 POUCES) Ce guide d’utilisation est fait en papier recyclé. En tant que partenaire de ENERGY STAR ®, notre société a conclu que ce produit répond aux normes d'économie énergétique de ENERGY STAR ®. ENERGY STAR ® est une marque déposée aux Etats Unis.
T5204FR.QX33 01.1.29 6:54 PM Page 2 AVERTISSEMENT: AFIN DE PREVENIR LE RISQUE D’INCENDIE OU D’ELECTROCUTION, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À L’HUMIDITE. Le symbole de l’éclair dans un triangle équilatéral indique la présence d’une tension suffisamment élevée pour engendrer un risque de choc électrique.
T5204FR.QX33 01.1.29 6:54 PM Page 3 Modèle de mise à la terre d’une antenne suivant les directives du Code national sur l’électricité. DESCENTE D’ANTENNE COLLIER DE MISE A LA TERRE DECHARGE D’ANTENNE (section 810-20 du CNE) BOÎTE D’ENTRÉE DE SERVICE CONDUCTEURS DE MISE A LA TERRE (section 810-21 du CNE) COLLIERS DE MISE A LA TERRE DISPOSITIF DE MISE A LA TERRE (article 250 du CNE, section H) CNE - CODE NATIONAL SUR L’ÉLECTRICITÉ S2898A d.
T5204FR.QX33 01.1.29 6:54 PM Page 4 PRÉCAUTIONS À PRENDRE DANGERS D’ÉLECTROCUTION ET D’INCENDIE EMPLACEMENT Afin de s’assurer d’un fonctionnement sans danger de ce téléviseur/magnétoscope et de manière à en obtenir un rendement optimal, veuillez suivre les recommandations suivantes lors du choix d’un emplacement: • Evitez une exposition à une lumière solaire directe et éloignez-le de toute source de chaleur intense. • Ne l’installez pas dans un endroit humide ou poussiéreux.
T5204FR.QX33 01.1.29 6:54 PM Page 5 TABLE DES MATIÈRES C CONSIGNES DE SÉCURITÉ . . . . . . . . . . . . . .2 C PRÉCAUTIONS À PRENDRE . . . . . . . . . . . . .4 EMPLACEMENT . . . . . . . . . . . . . . . . . . . . . . .4 DANGERS D’ÉLECTROCUTION ET D’INCENDIE . . . . . . . . . . . . . . . . . . . . . . . . . .4 AVERTISSEMENT . . . . . . . . . . . . . . . . . . . . . .4 C CARACTÉRISTIQUES . . . . . . . . . . . . . . . . . . .6 C ACCESSOIRES AVEC L’APPAREIL . . . . . . . .6 C VIDÉOCASSETTES . . . . . . . . . .
T5204FR.QX33 01.1.29 6:54 PM Page 6 CARACTÉRISTIQUES enregistrement effectué à la vitesse SLP (super-longue durée) procureront une image claire lors de l’arrêt sur l’image. • Télécommande à infrarouge • Choix sur l’affichage de l’écran du menu en deux langues: anglais ou français. • Minuterie/compteur de bande - Indique la durée de • Dépistage numérique et automatique (DTR) d’une lecture ou d’enregistrement écoulée en heures, minutes et secondes.
T5204FR.QX33 01.1.29 6:54 PM Page 7 VIDÉOCASSETTES Ce téléviseur/magnétoscope effectue la lecture de toutes les vidéocassette de type . Utilisez des vidéocassette de bonne qualité afin d’obtenir les meilleurs résultats. N’utilisez pas des vidéocassettes abîmées ou de mauvaise qualité.
T5204FR.QX33 01.1.29 6:54 PM Page 8 EMPLACEMENT DES COMMANDES Ce manuel couvre les modèles de 13" et de 19". Le fonctionnement de ces deux modèles est exactement le même, à l'exception de l'apparence. Le modèle de 19" est illustré dans ce manuel. - AVANT DE L’APPAREIL - AUDIO VIDEO STOP/EJECT REW PLAY F.FWD CHANNEL REC/OTR VOLUME POWER EARPHONE 1 2 3 4 5 6 7 8 9 1011 12 13 14 - TÉLÉCOMMANDE - Commande L - • Pressez-la pour sélectionner une des fonctions du menu à l’écran.
T5204FR.QX33 01.1.29 6:54 PM Page 9 - ARRIÈRE DE L’APPAREIL - ANT. 26 27 Commande d’enregistrement express à une eule touche (OTR) - Pressez cette touche (se trouvant sur la télécommande seulement) afin d’activer la fonction d’enregistrement à une seule touche. 9 Voyant d’enregistrement (REC) - Clignote pour indiquer qu’un enregistrement est en cours. Il s’allume lorsqu’un enregistrement par minuterie a été programmé, avant qu’il ne soit effectué.
T5204FR.QX33 01.1.29 6:54 PM Page 10 PRÉPARATION DE L’APPAREIL ANTENNES VHF/UHF SÉPARÉES RACCORDEMENTS Dans certaines régions, vous devrez utiliser une antenne extérieure. ANTENNE COMBINÉE VHF/UHF L’antenne VHF/UHF à tige (Fournie avec le modèle de 13 pouces seulement.)) est amovible. Poussez la tige en plastique à la base de l’antenne dans l’orifice prévu à cette fin dans la partie supérieure de l’appareil.
T5204FR.QX33 01.1.29 6:54 PM Page 11 RACCORDEMENT - ABONNÉ AU CÂBLE AVEC CONVERTISSEUR OU DÉCODEUR SÉPARÉ Si la compagnie de câblodistribution desservant votre région vous fournit un convertisseur séparé ou si vous êtes branché sur une antenne parabolique, effectuez le type de raccordement illustré ci-dessous. Avec ce type de raccordement, vous pouvez effectuer un l’enregistrement d’émissions diffusées sur les canaux de la télévision payante (à condition, bien entendu, que vous y soyez abonné).
T5204FR.QX33 01.1.29 6:54 PM Page 12 PROGRAMMATION DE L’APPAREIL A ce stade-ci, nous vous recommandons de programmer tous les canaux que vous êtes en mesure de capter dans votre région. REMARQUE : La programmation du syntonisateur de cet appareil n’est pas nécessaire lorsque vous utilisez un convertisseur/décodeur du câble ou de l’antenne parabolique.
T5204FR.QX33 4 01.1.29 6:54 PM Page 13 3 Effacement (ou ajout) de la mémoire Pressez les commandes d’avance rapide (F.FWD/B) ou de rembobinage (REW/s) afin d’effacer (ou ajouter) le canal sélectionné. Vous verrez le numéro du canal effacé passer au rouge à l’écran. Cela confirme son effacement de la mémoire. • Si vous désirez effacer d’autres canaux de la mémoire, répétez les directives données aux étapes 3 et 4 ci-haut. • Si vous pressez les commandes d’avance rapide (F.
T5204FR.QX33 1 01.1.29 6:54 PM Page 14 Sélection de la fonction RÉGLADE DE L’HORLOGE – MENU – Pressez la commande MENU de la télécommande. Sélectionnez la fonction RÉGLAGE DE L’HORLOGE en pressant plusieurs fois la commande de lecture (PLAY/K) ou d’arrêt (STOP/L) jusqu’à ce que la flèche pointe les mots RÉGLAGE DE L’HORLOGE à l’écran. Puis pressez la commande d’avance rapide (F.FWD/B). PROG.
T5204FR.QX33 01.1.29 6:54 PM Page 15 l’heure avec son signal télévisé, conservez la fonction de réglage automatique de l’horloge - le mot [AUTO] apparaît à l’écran à côté des mots CHANG. AUTO HORL.. Le téléviseur/magnétoscope recherchera automatiquement le canal approprié parmi tous les canaux diffusant dans votre région et le sélectionnera. 4 Fin de la sélection de la fonction de réglage automatique de l’horloge Appuyez sur la touche MENU de la télécommande pour revenir au mode TV.
T5204FR.QX33 8 01.1.29 6:54 PM Page 16 Mise en marche de l’horloge Pressez la commande MENU de la télécommande. Même si les secondes n’apparaissent pas à l’affichage, leur décompte débute à partir de 00 dès que vous pressez la commande MENU de la télécommande. Considérez ceci lorsque vous désirez que l’heure soit exacte à la seconde près.
T5204FR.QX33 01.1.29 6:54 PM Page 17 CARACTÉRISTIQUES SPÉCIALES REMBOBINAGE / ÉJECTION AUTOMATIQUES DÉMAGNÉTISATION La magnétisation provenant d’appareils se trouvant à proximité risque d’altérer les couleurs de l’image du téléviseur/magnétoscope. Si cela se produisait, éloignez le téléviseur/magnétoscope de tels appareils. Si, malgré cela, la couleur n’est pas acceptable, débranchez l’appareil de la prise de courant secteur et rebranchez-le après 30 minutes.
T5204FR.QX33 01.1.29 6:54 PM Page 18 AJUSTEMENT DE L’IMAGE DÉCODEUR DE SOUS-TITRES Les commandes de l’image du téléviseur/magnétoscope - LUMINOSITÉ, CONTRASTE, COULEUR, TEINTE et NETTETÉ - sont préréglées aux spécifications de l’usine. Bien que ces commandes soient préréglées au mieux, il vous sera peut-être nécessaire d’effectuer certains ajustements pour obtenir une image d’un aspect naturel.
T5204FR.QX33 1 01.1.29 6:54 PM Page 19 Sélection de la fonction S-TITRES (Sous-TITRES) ANNULATION DU MODE D’AFFICHAGE DE SOUS-TITRES – MENU – Pressez la commande MENU de la télécommande. Sélectionnez la fonction S-TITRES (SousTITRES) en pressant plusieurs fois la commande de lecture (PLAY/K) ou d’arrêt (STOP/L) jusqu’à ce que la flèche pointe le mot S-TITRES à l’écran. PROG.
T5204FR.QX33 01.1.29 6:54 PM Page 20 • Lorsque vous tournez "TV-Y" sur [VISION], tous RÉGLAGE DU CIRCUIT V Le CIRCUIT V permet aux parents d'éviter que leurs enfants ne regardent des programmes télévisés qui ne leur sont pas destinés.
T5204FR.QX33 01.1.29 6:54 PM Page 21 RÉGLAGE COTE MPAA Assurez-vous de faire ce qui suit… • Le téléviseur/magnétoscope doit être mis en circuit. 1 Sélectionnez “RÉGLAGE CIRCUIT V”. Pressez la commande MENU de la télécommande. Pressez la commande de lecture (PLAY/K) ou d’arrêt (STOP/L) pour pointer sur "RÉGLAGE CIRCUIT V". Puis, pressez la commande d’avance rapide (F.FWD/B). – MENU – PROG.
T5204FR.QX33 01.1.29 6:54 PM Page 22 LECTURE LECTURE NORMALE • Le téléviseur/magnétoscope doit être mis en circuit pour effectuer cette opération. 1 Introduisez une vidéocassette contenant déjà un enregistrement Si la languette de protection de la vidéocassette a été brisée, le téléviseur/magnétoscope entamera automatiquement la lecture de la bande. 2 Entamez la lecture LECTURE ARRÊT SUR IMAGE Pressez la commande de lecture (PLAY) afin d’entamer la lecture de la bande.
T5204FR.QX33 01.1.29 6:54 PM Page 23 COMMANDE DE STABILITÉ VERTICALE Cette commande sert exclusivement à faire cesser le déplacement vertical de l’image seulement lorsque le téléviseur/magnétoscope se trouve en mode d’arrêt sur image. Pour le faire, pressez les touches des canaux (CH K / L). REMARQUE : Si vous notez la présence de lignes parasites à l’écran, déplacez-les ou réduisez leur nombre en suivant les directives données à la section précédente (RÉDUCTION DES PARASITES).
T5204FR.QX33 01.1.29 6:54 PM Page 24 pointe les mots LECT. RÉPÉTÉE à l’écran. Puis activez le mode de répétition de lecture de votre choix (toute la bande ou portions enregistrées seulement) en pressant les commandes d’avance rapide (F.FWD/B) ou de rembobinage (REW/s) pour faire apparaître les mots [TOUS](toute la bande) ou [VIERGE] (seulement les portions enregistrées) à côté des mots LECT. RÉPÉTÉE à l’écran.
T5204FR.QX33 01.1.29 6:54 PM Page 25 Pressez la commande MENU de la télécommande. Pressez plusieurs fois la commande de lecture (PLAY/K) ou d’arrêt (STOP/L) jusqu’à ce que la flèche pointe les mots RECH. CHRONOMÉTRQUE. Puis pressez la commande d’avance rapide (F.FWD/B). – MENU – PROG. EN DIFFÉRÉ RÉGLAGE DE L’ IMAGE RÉGLAGE DE L’ HORLOGE RÉGLAGE DES CANAUX RÉGLAGES DE L’ USAGER RÉGLAGE CIRCUIT V LANGAGE [FRANÇAIS] S-TITRES [HF] REMISE À ZÉRO RECH.
T5204FR.QX33 01.1.29 6:54 PM Page 26 REMARQUES : • Afin de protéger le ruban de la vidéocassette, le téléviseur/magnétoscope ne reste pas en mode de pause pendant plus de 5 minutes. Lorsque ces 5 minutes se sont écoulées, l’appareil reprend l’enregistrement afin d’éviter que ruban soit abîmé. • Si le mode d’affichage de sous-titres est activé STITRES [EF], l’affichage apparaîtra à l’écran pendant 5 secondes puis disparaîtra.
T5204FR.QX33 01.1.29 6:54 PM Page 27 1) Introduisez une vidéocassette préenregistrée dans la source du magnétoscope de lecture ou du caméscope. 2) Insérez une vidéocassette vierge (ou une vidéocassette sur laquelle vous pouvez effectuer un second enregistrement) dans le téléviseur/magnétoscope (effectuant l’enregistrement). 3) Pressez la commande de vitesse de défilement (TAPE SPEED) sur le téléviseur/magnétoscope afin de sélectionner la vitesse désirée (SP/SLP).
T5204FR.QX33 2 01.1.29 6:54 PM Page 28 – PROG. EN DIFFÉRÉ – Appuyez sur la commande PLAY/K (lecture) ou STOP/L (arrêt) à plusieur reprises jusqu’à ce que la flèche pointe la position de la programmation désirée. Puis pressez la commande d’avance rapide (F.FWD/B). CH --------- 3 5 Sélectionnez la position de la programmation désirée (1 à 8).
T5204FR.QX33 10 01.1.29 6:54 PM Page 29 Quittez le mode de programmation Appuyez sur la touche F.FWD/B (avance rapide) ou REW/s (rembobinage). La programmation est maintenant achevée. • Pour programmer un autre enregistrement par la minuterie, répétez les directives données aux étapes 2 à 10. • Appuyez sur la touche MENU de la télécommande pour revenir au mode initial. 11 Réglez la minuterie. Pressez l’interrupteur d’alimentation (POWER). Le voyant d’enregistrement (REC) s’allumera.
T5204FR.QX33 01.1.29 6:54 PM Page 30 • Il n’est pas nécessaire de presser la commande • • • • • d’enregistrement (RECORD) pour effectuer un enregistrement par la minuterie. Les enregistrements par la minuterie commencent automatiquement à l’heure pour laquelle ils ont été programmés pour débuter.
T5204FR.QX33 2 01.1.29 6:54 PM Page 31 Sélectionnez la composante qui se mettra en marche ; le téléviseur (TV) ou le magnétoscope (CASS) Pressez la commande de lecture (PLAY/K) ou d’arrêt (STOP/L) plusieurs fois jusqu’à ce que la flèche pointe sur les mots TV/CASS. Pressez la commande d’avance rapide (F.FWD/B) ou de rembobinage (REW/s) afin de sélectionner la composante qui fonctionnera lorsque l’appareil se mettra en circuit automatiquement ; le téléviseur [TV] ou le magnétoscope [CASS].
T5204FR.QX33 01.1.29 6:54 PM Page 32 ENTRETIEN NETTOYAGE DU BOÎTIER EXTÉRIEUR RÉPARATION • Essuyez le panneau frontal et les autres surfaces • Si votre appareil fontionne mal, n’essayez pas de le • externes avec un tissu doux trempé dans de l’eau tiède et essorez- le bien. N’utilisez jamais de solvant ou de l’alcool. Ne vaporisez pas un insecticide liquide à proximité de l’appareil. De tels produits chimiques risquent d’endommager et de décolorer les surfaces exposées. réparer vous-même.
T5204FR.QX33 01.1.29 6:54 PM Page 33 PROBLÈMES DE FONCTIONNEMENT Si vous avez suivi les instructions contenues dans ce manuel et vous éprouvez toujours de la difficulté à faire fonctionner l’appareil, consultez la colonne intitulée "PROBLÈMES" puis la ligne correspondante dans la colonne intitulée "MESURES CORRECTIVES" afin de remédier au problème. PROBLÈMES Pas d’alimentation.
T5204FR.QX33 01.1.29 6:54 PM Page 34 PROBLÈMES AVEC LES SOUS-TITRES Les sous-titres comportent des fautes d’orthographe. CAUSES POSSIBLES • Il se peut que l’émission télévisée que vous regardez en direct soit • diffusée avec des sous-titres qui contiennent des erreurs. Les • émissions enregistrées ne devraient pas comporter des fautes • d’orthographe étant donné le temps disponible pour vérifier et • corriger les sous-titres.
T5204FR.QX33 01.1.29 6:54 PM Page 35 FICHE TECHNIQUE RENSEIGNEMENTS GÉNÉRAUX SPÉCIFICATIONS - ÉLECTRICITÉ Tube image : 13 ou 19 pouces, canon à rayons alignés tube à parcours électronique dirigé à 90˚ Système telévision : NTSC télévision standard Décodeur de sous-titres : 15.119/FCC Système d’enregistrement : rotatif à deux têtes Largeur de la bande : 1/2 pouce (12,65 mm) Vitesses de la bande : SP 33,40 mm/sec. LP 16,67 mm/sec. SLP 11,12 mm/sec.
T5204FR.QX33 01.1.29 6:54 PM Page 36 GARANTIE D’UN APPAREIL DE DIVERTISSEMENT SYLVANIA Nous vous remercions d’avoir acheté un appareil de divertissement SYLVANIA. Votre nouvel appareil, comme tous ceux de notre production, se conforme à de normes de qualité. Dans des conditions normales d’usage, nous sommes certains qu’il vous donnera entière satisfaction pendant de nombreuses années. Cependant, en cas de problèmes, vous êtes protégé en vertu des clauses de cette garantie.