OWNER’S MANUAL COLOR TV/VCR/DVD TRIPLE COMBO 6719DE (19 inch) SUPPLIED ACCESSORIES ACCESSORIES PART NO. Remote Control Unit NE222UD INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
LOCATION WARNING For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . .2, 3 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . . . . . . . .5 C TABLE OF CONTENTS . . . . . . . . . .6 C FEATURES . . . . . . . . . . . . . . . . . . . .7 C OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . . . . . . . .9, 10 C PREPARATION FOR USE . . . . .
FEATURES TV/VCR Mode • Hi-Fi system–The Hi-Fi stereo recording system • 2 Step picture search operation–You can view a • • Three different playback tape speeds : SP/LP/SLP • Two different recording tape speeds : SP/SLP • Auto Head Cleaner–Automatically cleans video • • offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz, and 0.005% wow and flutter.
DVD Mode ¡On-screen display ¡Dolby Digital sound Information about the current operation can be displayed on a TV screen, allowing you to confirm the currently active functions (such as program playback), on the TV screen using the remote control. This unit can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder.
OPERATING CONTROLS AND FUNCTIONS - FRONT PANEL - [Fig.1] DVD buttons 1 2 3 4 3 - REMOTE CONTROL - POWER PICTURE 1 22 23 1 2 3 4 5 6 7 8 27 28 29 30 31 32 33 0 SPEED CH. 11 VOL. 2 MUTE STOP DISC MENU DISPLAY ENTER SETUP TITLE RETURN CLEAR SEARCH MODE REPEAT A-B AUDIO ANGLE MODE SUBTITLE 11 12 13 14 4 15 16 17 18 19 20 21 5. STOP Button [TV/VCR P.26 / DVD P.37] Stops operation of the disc. (or front panel) Stops operation of the disc or tape contents. (remote control) 6.
- REAR PANEL - [Fig.3] AUDIO OUT COAXIAL ANT. 46 47 48 19. VIDEO input Jack Connect to the video output jack of a video camera or VCR. 20. AUDIO L/R input Jacks Connect to the audio output jacks of a video camera or VCR. 21. Cassette compartment 22. PICTURE Button Press to adjust the picture. 23. Number Buttons TV/VCR Mode:[P.15] Press two digits to directly access the desired channel. Remember to press "0" before a single digit channel.
45. SELECT Button Press to switch TV/VCR and DVD mode. You can see the mode (TV/VCR or DVD) on the front panel indicator. 46. ANT. in Jack Connect to an antenna, cable system, or satellite system. 47. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 48. COAXIAL digital audio out Jack Connect to the digital input of an external amplifier or decoder (for DVD audio only).
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the unit’s channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover.
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS (for DVD) Use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck. AUDIO OUT COAXIAL ANT. Amplifier equipped with digital input jacks, MD deck, DAT deck, etc. To COAXIAL DIGITAL AUDIO INPUT jack To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack (Only DVD AUDIO OUT) [Fig. 6] NOTES: • The audio source on a disc in a 5.
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables available at retail for the audio connections.
TV/VCR SECTION SET UP FOR USE SELECTING THE LANGUAGE CLOCK SET UP (AUTO / MANUAL) TV/VCR 1 TV/VCR Plug in theu nit’s power cord The unit’s clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the unit. Then, set to [ON] the auto clock setting which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.
5 Select the year Press the Arrow button K or L until your desired year appears. (Example: 2005) Then press the Arrow button B. 6 Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then press the Arrow button B. 7 Select the minute Press the Arrow button K or L until the desired minute appears.
4 Enter the channel number that contains the Automatic Clock Setting Signal DAYLIGHT-SAVING TIME Press the SETUP button on the remote control. Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu. Press the Arrow button K or L to select “AUTO CLOCK CH”. Press the ENTER button or the Arrow button { or B until you locate auto clock station number which you wrote down in step [3] on page 16. Press the SETUP button to exit the screen.
DELETING (OR ADDING) CHANNEL CHANNEL SET UP TV/VCR You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the unit’s channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box. Make sure ... • The unit is turned on.
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL TV/VCR 1 Turn on the unit Press the POWER button to turn on the unit. 2 Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control. Note for using the Number button on the remote control: ¡When selecting cable channels which are higher than 99, press +100 first, then press the last two digits. (Example: to select channel 125, first press “+100” then press “2” and “5”).
Make sure ... • The unit is turned on. CLOSED CAPTION SYSTEM TV/VCR You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want.
V-CHIP SET UP SUB RATINGS V-CHIP SET UP TV/VCR V-CHIP SET UP 1 Make sure ... • The unit is turned on. 1 Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button. 2 Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button.
CHANGING V-CHIP BLOCKED PROGRAMMING • When you set “G” to [VIEW], all ratings will change to [VIEW] automatically. Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] and [2]. 2)Press the Arrow button K or L to select “TV RATING”. Then press the ENTER button. Select a TV rating to be unblocked by pressing the Arrow button K or L.
MTS (Multi-Channel Television sound) SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE TV/VCR When you play a VHS tape, or receive a broadcast on the unit’s tuner channel you are watching, the status shown below will appear when you press the DISPLAY button on the remote control.
SELECTING THE MTS SYSTEM TV/VCR TO SELECT MONO MODE Make sure ... • The unit is turned on. You can change the selection to “MONO” if you want to listen to HIFI tapes in normal audio playback. 1) Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2) Press the Arrow button K or L to point to “VCR AUDIO”. 3) Press the ENTER button until [MONO] appears. 4) Press the SETUP button on the remote control to return to TV mode.
VIDEO CASSETTE This unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE • Avoid moisture. Moisture condensation may occur Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the unit. The unit will automatically be turned on.
PLAYBACK NORMAL PLAYBACK SLOW MOTION TV/VCR TV/VCR If the erase-protection tab has been removed, the unit will start playback automatically. Press the PAUSE button, then press the F.FWD button to start the playback in slow motion. The unit mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than 5 minutes, the unit will automatically go into the Stop mode. Make sure ... • The unit is turned on.
SPECIAL PLAYBACK Make sure ... • The unit is turned on. • Insert a prerecorded tape. AUTO REPEAT PLAYBACK TV/VCR RENTAL PLAYBACK TV/VCR This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2 Set “RENTAL” to [ON] Press the Arrow button K or L to point to “RENTAL”.
SEARCH Make sure ... • The unit is turned on. • Insert a tape. TIME SEARCH TV/VCR ZERO RETURN TV/VCR This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review.
INDEX SEARCH 1 TV/VCR This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR. • The index mark will not be recorded if the PAUSE button is pressed and released during recording.
RECORDING Make sure ... • The unit is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This unit will ONLY record and view the same channel. • This unit cannot record the contents from the built-in DVD. SKIPPING UNWANTED SCENES DURING RECORDING NORMAL RECORDING TV/VCR You can ONLY watch the same TV program that is being recorded.
OTR (One Touch Recording) TV/VCR This function enables you to set a recording length simply by pressing the REC/OTR button on the front panel. Make sure ... • The unit is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • You CANNOT start OTR with the remote control. • Recording starts immediately when the REC/OTR button is pressed.
TIMER RECORDING AUTOMATIC TIMER RECORDING 1 Select “TIMER PROGRAMMING” Press the SETUP button on the remote control. Confirm “TIMER PROGRAMMING” is pointed by pressing the Arrow button K. And press the ENTER button. • If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow steps [3] to [8] on pages 15 and 16. Then set the timer recording. - TV/VCR SETUP - TV/VCR You may set the unit to start and end a recording while you are away.
5 Set beginning hour Press the Arrow button K or L until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then press the Arrow button B. 6 Set beginning minute Press the Arrow button K or L until the desired minute appears. (Example: “30” for 7:30PM) Then press the Arrow button B. 7 Set end hour Press the Arrow button K or L until the desired hour appears. (Example: “8, PM” for 8:50PM) Then press the Arrow button B.
TO CHECK THE BEGIN/END TIME 3 1)Press the POWER button so that the Recording indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. 4 TV/VCR • Make sure the channel you want to record is prop- • • • • • erly set in advance. It is not necessary to press the RECORD button for timer recording.
ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: When the Closed Caption mode is ON: • Counter mode: After 5 seconds, only the counter • The On Screen Display disappear after 5 seconds. • This is true even if the MUTE button is pressed, or • remains.
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS DISC TYPES The following discs can be played back on this TV/VCR/DVD. ¡DVD video ¡DVD-R/RW* ¡DVD+R/RW* ¡Audio CD ¡CD-R/RW* ¡MP3* * Depending on the types or the writing method of the medium some discs can not be played. [DVD] Data on a DVD is divided into sections called “titles” and then into subsections called “chapters”, each of which is given a title or chapter number.
PLAYING A DISC BASIC PLAYBACK DVD-V CD GENERAL FEATURES MP3 DVD-V Getting started ¡Turn on the power of amplifier and any other com- ponents, if necessary. 1 Press the POWER button. ¡The power will turn on. 2 Press the OPEN/CLOSE button to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DVD may contain menus to navigate the disc and access special features.
FAST FORWARD/ FAST REVERSE RESUME DVD-V CD MP3 DVD-V 1 During playback, press the STOP button. ¡Resume message will appear on the TV screen. g or REV h button for a few seconds. ¡“ g 1” or “h 1” appears on the screen. from the point at which playback was stopped. ¡To cancel resume, press the STOP button twice. ¡If the unit is turned off, resume function will be can- celled. ¡For MP3, playback will resume from the beginning of the track at which playback was stopped.
SEARCH FUNCTION TRACK SEARCH TIME SEARCH CD MP3 DVD-V There are three ways to begin playback on an Audio CD and MP3 at a specific track. CD 1 During playback, press the SEARCH MODE button three times (CD: twice) to display the Time Search on the TV screen. Using the Number buttons on the remote control 2 Within 30 seconds, enter a desired disc 1 Press the Number buttons to enter the time using the Number buttons on the remote control. desired Track number.
SPECIAL PLAYBACK FUNCTION REPEAT PROGRAM REPEAT is available only during playback. CD REPEAT TITLE / CHAPTER DVD-V 1 In stop mode, press the MODE button. ¡The PROGRAM screen will appear. To activate the repeat function, press the REPEAT button during playback. ¡The repeat mode changes as described below every time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) NOTES ¡Repeat Title/Chapter is not available with some scenes.
PLAYING A MP3 DISC MP3 PLAYBACK PROGRAM MP3 MP3 When a CD with MP3 files is in the unit, press the DISC MENU button to call up the file list. 1 In stop mode, press the Arrow button (K/L) to select the desired group or track. ¡If a group is selected, press the Arrow button B or the ENTER button to go on to the track selection screen. Press the Arrow button (K/L) to choose a track, then press the ENTER button. ¡If a track is selected, press the ENTER button to start playing tracks.
CHANGING THE SETTINGS SUBTITLE LANGUAGE CAMERA ANGLE DVD-V DVD-V The unit allows you to select a language for subtitles during DVD playback (if available). Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. 1 Press the SUBTITLE button during playback. 2 Press the SUBTITLE button repeatedly to select your desired subtitle language.
THE ON-SCREEN INFORMATION DVD-V CD MP3 You can check the information about the current disc by pressing the DISPLAY button on the remote control. For DVD-Vs For audio CDs 1 Press the DISPLAY button during playback to show current Chapter. to show the current Track. ¡The elapsed and remaining playing time of the cur- ¡The elapsed and remaining playing time of the current chapter will be displayed. 1 Press the DISPLAY button during playback 9/49 rent track will be displayed.
CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING DVD-V Language options are not available with some discs. 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice. SETUP QUICK CUSTOM INITIALIZE 2 Press the Arrow button L to select CUSTOM, then press the ENTER button. ¡CUSTOM mode will appear. 3 Press the Arrow button (K/L) to select “LANGUAGE”, then press the ENTER button to confirm.
DISPLAY SETTING AUDIO SETTINGS DVD-V DVD-V You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD. 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears.
CONTROL LEVELS PARENTAL CONTROL ¡ALL DVD-V All parental lock is cancelled. ¡Level 8 DVD software of any grade (adult/general/children) can be played back. Parental Control limits the disc viewing that exceed your settings. (with a password or playback will stop.) This feature allows you to prevent discs with alternative scenes from being played by your children. ¡Levels 7 to 2 PARENTAL LEVEL ¡Level 1 Only DVD software intended for general use and children can be played back.
TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, consulting the following checklist. PROBLEM No power The unit does not respond to the remote control CORRECTIVE ACTION • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. • Check if the power plug is connected to an AC outlet. • Check the batteries in the remote control. • Aim the remote control directly at the remote sensor.
PROBLEM Picture OK, Sound Poor No picture but the audio is OK in playback CORRECTIVE ACTION Try a new channel, if OK, then possible station trouble. • Check for local interference. • • Make sure the timer recording is set correctly. • Make sure the power is off. • Make sure the unit’s clock is set correctly. • Make sure the tape has an erase-prevention tab. If need, cover the • hole with plastic tape. • Adjust tracking control for a better picture using the CHANNEL • button K or L on the front panel.
DVD Mode PROBLEM CORRECTIVE ACTION • Insert a correct video disc that plays on this unit. • Press the SELECT button on the remote control to select DVD mode. Then try other DVD feature. • Insert the disc. Disc cannot be played • Clean the disc. • Place the disc correctly, with the label side up. • Cancel the parental lock or change the control level. • Connect the audio cables firmly. No sound • Turn the power of the audio component on. • Correct the audio output settings.
MAINTENANCE CABINET CLEANING • Wipe the front panel and other exterior surfaces of • the unit with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces. 1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2.
SPECIFICATIONS GENERAL SPECIFICATIONS TV/VCR CRT 19 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 52 PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 52 MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 52 VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 53 CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 53 CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 53 PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 54 MODO DE ENTRADA EXTERNA . .
30. Botón CLEAR Para cancelar ajustes. 31. Botón MODE Activa el modo de reproducción programada o el modo de reproducción aleatoria. 32. Botón SEARCH MODE Presione para localizar un punto deseado. 33. Botón AUDIO Presione para seleccionar un idioma de audio o el modo de sonido deseado. 34. Botón SUBTITLE Presione para seleccionar el idioma de subtítulos deseado. 35. Botón REPEAT Repite la reproducción del disco, título, capítulo o pista actual. 36.
PARA INSERTAR LAS PILAS Consulte la figura 7 de la página 14 1) Abra la cubierta del compartimiento de las pilas empujando la cubierta del mando a distancia en el sentido de la flecha. 2) Inserte 2 pilas “AA” en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-). 3) Vuelva a poner la cubierta. NOTAS: • Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de conectar otro componente.
NOTA: Si, por alguna razón, el menú está en francés, pulse el botón SETUP en el mando a distancia, pulse el botón K o L para señalar el “LANGAGE [FRANÇAIS]”, a continuación, pulse el botón ENTER y pulse el botón SETUP en el mando a distancia. AJUSTE DE CANAL TV/VCR Puede programar el sintonizador para buscar todos los canales que recibe en su localidad. NOTA: El canal preparado NO es necesario cuando esté conectado a una caja de cable o caja de satélite.
LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP.