Manual

Stereo system
@ @ ®
FoANALOG AUDIO INPUT jacks
To Right (red) and Left (white)
AUDIO OUT jacks
(only DVD AUDIO OUT)
[Fig. 6]
NOTES:
• Be sum to turn off tile power to all components in the system before connecting another component.
• Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD/VHS.
Use an audio coaxial digital cables (not included) for tile audio connections.
Connecting to ml amplifier equipped with digital input jacks such as MD Deck or Dat Deck.
Amplifier equipped with digital
_ input jacks, MD deck,
DATdeck, etc. I _ _ I
I _-__ I To COAXIAL DIGITAL
<1 >AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 7]
NOTES:
,, The audio source on a disc in a 5.1 channel Dolby Digital surround format c_mnot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting tmother component.
,, Refer to tile Owner's Mmmals for tile components to be connected to the TV/DVD/VHS.
®Set Dolby Digital and DTS to OFF for audio output in the setup mode. Playing a TV/DVD/VHS using
incorrect settings may generate noise distortion, and may also damage tile speakers.
®When Dolby Digital is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 chgmnel Dolby Digital surround format, the audio will be muted.
- 13 - EN
IC29