Manual

FV OPERATION
"7 _'_ _or be_VOVD!VHS
Press tile POWER button to turn on the
TV/DVD/VHS.
Seect the csa_ se _su_be
Press the CHANNEL _ or V button to select your
desired charnel number or press the number buttons
on the remote control.
Remember: If the TV/DVD/VHS is connected to a
cable box or smelJite box, the TV/DVD/VHS must be
on CH3 or CH4, then the channel to be viewed must
be selected on the cable box or satellite box+
+_Ad/us s>_'+d
Press the VOLUME A or V button
to adjust the volume.
VOLUME 20
H|||mml
NOTES:
+ If you press the CHANNEL _ or vin the DVD
mode, you can change the TV chmmels.
Even if you turn off the TV/DVD/VHS in the DVD
mode, when you turn it on again, it will go into the
TV/VCR mode.
Magnetism from nearby appliances might affect the
color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
The TV/DVD/VHS's picture controls - BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS -
are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
+ Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
* TV/DVD/VHS power must be turned on.
>eec_ P ( T,}[qE
Press the PICTURE button on the remote control.
2 9+ect i e+_,'+>u >a-;l: <:_at: ust
Press the Arrow _, or T button until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
BRIGHT
TINT ................
SHARPNESS
3 A: +++;+++be p <'.,_'e oor+bo+
Press the Arrow _ (71"<_ button to adjust to your
desired level.
Arrow _l Arrow
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
+ If there is a power failure of any kind, the unit will
retain its memory for this feature.
- 19 - EN
IC29