Manual

T# C W,:C£ 7 HX /{f,:G N//,:N/9 77/!47;
l)Press the POWER button so tha the REC indicator
goes off.
2)Press the SETUP button on the remote control.
3)Confiml "TIMER PROGRAMMING" is pointed.
4)Press the Arrow _ button. The details of programs
appear on the TV screen.
5)Press the SETUP button on the remote control to
return to TV mode.
,, Make sure the channel you want to record is prop-
erly set in advance.
* I/is not necessary to press the RECORD button for
timer recording.
o Recording begins automatically at the Start time.
® If you are recording using a Timer mode, you may
not operate the unit manually.
® The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
,_ If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
® If the tape runs out before the end time, the
TV/DVD/VHS will switch to the Stop mode imme-
diately, and the tape will be ejected.
With this feature, after timer recording is finished,
the beghming of the recorded program(s) cml be
searched for automatically.
TV,VCI_ SETUP
Press the SETUP button on the TIMER PROGRAMMING
SETTING CLOCK
remote control. CHANNEL SET UP
USERS SET UP
V CHIP SET UP
Press the Arrow A,or V button to LANGUAGE IENGLISH]
CAPTION OFF]
ZERO RET[_RN
point to "USER'S SET UP". TIMESEAROH
INDEX SEARCH
Then, press the Arrow _ button.
2 Set AUTO RETURN t<u/ION]
Press the Arrow _, or V button to
point to "AUTO RETURN".
Press the Arrow _ or _'9 button
until tONI appears.
%
USERS SET UP /
/
RENTAL {OFF]
REPEAT PLAY IOFE
AUTO RETURN * ON]t .....
VOR AUDIO j
iHF_
TV AUDIO {STEREO]
3 Auto Reb,{u w beg',,
When all the timer recordings are completed, the
TV/DVD/VHS will rewind to the beginning of the
recorded program(s).
NOTE:
®If you press the POWER button while tape is
rewinding, the Auto Return will stop.
_ W <;:¢ '® eco d®d s_<¢?pa_l'
Press the PLAY button.
Repea steps Ell and [21, select [OFFI using the
Arrow _ or _'9 button.
If there is a power failure of any kind, the unit
will retain its memory lbr this feature.
The Sleep Timer function turns off the
TV/DVD/VHS without using the POWER button
after a desired period of time.
NOTE:
• This function does not operate during Recording
mode.
Press the SLEEP button on the remote control until
"SLEEP TIMER" appears.
Press the SLEEP button until your
desired sleep time appears.
Each additional push will increase
the time by 30 mhmtes up to 120
minutes.
SLEEP 120 MINUTES
After 5 seconds, exit the Sleep
Timer setting.
7Y) <;,_h'CEL 7WE _S.££? 77 W£'£
Press the SLEEP button on the ren]ote control until
"SLEEP TIMER" appears. Press the SLEEP button
until "SLEEP 0 MINUTES" appears.
- 34 - EN
IC29