Manual

Tile DVD player has a function which allows you to
select the desired language for subtitles.
sw_ I"*,e? !:>few; "_e 9_:_??'TL, E bu o_ o
• The subtitle l_mguage can be changed if the subtitles
are recorded in multiple languages on the DVD
being played.
o The subtitle language cgumot be changed if the
subtitles are recorded in a single language on the
DVD being played.
q SUBTITLE 1 ENGI6 I
v
_"'=""_Subtifle 1
_'="='_Subtille 2
OFF
oft may take time to display the subtitles in the
selected language.
* The screen display will disappear after about 5
seconds.
®When "SUBTITLE NOT AVAILABLE" appears
onscreen, it means no subtitle is recorded on the
scene.
The DVD player has a function which allows you to
select the desired camera angle.
P_'_::_;_,;,::_ AHGLE/';_ o ° 5_/,__i!4f?sybs(;_
• If the disc contains sequences recorded from differ-
ent camera angles, the angle icon (_) will appear
at the top-right of the screen. You can change the
camera angle when the icon appears on the screen.
• The camera angle cannot be ch_mged if the disc does
not contain sequences recorded from different
cmnera angles.
• Pressing the SUBTITLE button cycles the subtitle
l_mguage from SUBTITLE 1, SUBTITLE 2 and all
the languages recorded.
Current subtitle mode will be displayed when you
press the SUBTITLE button at first.
Press the SUBTITLE button, and then press the cur-
sor ("_/_') button to set it to on or off,
Note
Notes
®Some discs allow subtitle language setting on the
disc menu. (Operation varies between discs, so refer
to the m_mual accompanying the disc.)
®If the desired language is not shown after pressing
the SUBTITLE button several times, the disc does
not have subtitles in that language.
The subtitle language resets to the one which has
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that
language is not available on a disc, a language
defined by the disc is selected.
- 45 -
Angle 1
Angle 2
Angle 8
®The screen display will disappear after about 5
seconds.
Current camera tingle will be displayed when you
press the ANGLE button at first.
EN
OIAII