Manual

[TVNCR ]
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
)ussibilities. Before ammging for service, check these items. It could save your time and money.
PROBLEM CORRECTIVE ACTION
No power. ®Make sure the AC cord is connected to an AC outlet.
,, Make sum the power is turned on.
Remote Control Doesn't Work ,, Is TV/DVD/VHS plugged in?
,, Power at outlet?
* Check batteries in Remote Control.
No picture and sound. ®Make sure the AC cord is connected to an AC outlet.
,, Check antenna connection.
* Let the TV/DVD/VHS program its tuner memory.
No picture or poor picture on ®Adjust direction or replace gmtenna.
TV/DVD/VHS. ®Adjust picture controls.
No sound or poor sound. . Adjust volmne control on remote control or main unit.
,, Press the MUTE button to restore sound.
Bars On Screen ,, If outside gmtenna is being used, check for broken wire.
* Check for local interference.
Picture Distorted or Blurred * Try a new channel, if OK, then possible station trouble.
* If outside antenna is being used, check for broken wire.
Picture Rolls Vertically * Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture * ]Ifoutside antenna is being used, check for broken wire.
* Check for local interference.
No Color * Try a new channel, if OK, then possible station trouble.
,, ]Isgmtenna connected to terminal on the back of the set?
®]Ifoutside mltenna is being used, check for broken wire.
* Adjust COLOR control.
Poor Reception on Some Channels ®Try a new channel, if OK, then possible station trouble.
Ghosts in Picture ,, ]Isantenna connected to terminal on the back of the set?
* ]Ifoutside gmtenna is being used, check for broken wire.
* Check for local interference.
Weak Picture * Try a new channel, if OK, then possible station trouble.
®]Ism_tenna connected to terminal on the back of the set?
* If outside gmtenna is being used, check for broken wire.
* Adjust CONTRAST & BRIGHT control.
Sound OK, Picture Poor ,, Try a new channel, if OK, then possible station trouble.
* ]Ism_tenna connected to terminal on the back of the set?
* ]Ifoutside gmtenna is being used, check for broken wire.
,, Check for local interference.
* Adjust CONTRAST & BRIGHT control.
Picture OK, Sound Poor ®Try a new channel, if OK, then possible station trouble.
* Check for local interference.
Timer recording is not possible. ,, Make sum the timer recording is set correctly.
,, Make sum the power is off.
®Make sum the TV/DVD/VHS clock is set correctly.
Cannot go into Record mode. * Make sum the tape has an erase-prevention tab. If need, cover the
hole with plastic tape.
- 52 - EN
OIAII