Manual

Connections
Use a standard antenna cable to connect tile wall jack to the ANT IN Jack on STB.
STB connection to the antenna
To the antenna
NOTE:
Antenna and antenna cable are net included.
L J
WHEN CONNECTING TO CABLE BOX ALSO:
Incoming cable
signals
CABLE BOX
TV
To the antenna I [ANT ANT] ANT-IN
I l IN OUT I Jack
Antenna cable
STB
ANT
hi ......... ..... '
I • • ...... g,o ,.gLo ,.........
NOTE:
Antenna, antenna cable and Cable box are not included.
Refer to followin{
pages for the
2
3
4
5
Use a standard antenna cable to connect the wall jack to the
ANT IN Jack on STB.
NOTE:
Refer to tile following pages for tile connection to TV.
Use an incoming cable to connect to an antenna input jack on
the cable box.
Use a standard antenna cable to connect an antenna output jack
on the cable box to an antenna input jack on the TV.
Ariel completing tile connection to TV. plug tile AC power
cord of the TV into the AC outlet, then turn the TV on.
Select the output channel from the cable box e.g., ch3 or ch 4.
NOTE:
Refer to the TV owner's manual for further information.
Plug the AC power cord of STB into the AC outlet, then turn
STB on.
Note to the Cable TV System
Installer :
This relninder is provided to call
the Cable TV system installer's
attention to Article 820-40 of the
National Electrical Code, which
provides guidelines ti_r proper
grounding - in particular.
specifying that the cable ground
shall be connected to the grounding
system of the building, as close to
the point of cable entry as possible.
16
EN