LED AMARM CLOCK AM/FM RADIO MODEL SCR1336 Operating Instructions BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Be sure to save this booklet for future reference.
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT. ) ) ) ) ) ) ) ) ) ) ) ) ) Read and follow all instructions. Keep these instructions for future reference. Heed all warnings. Do not use this product near water. Do not ceiling- or wall-mount the product. Do not block any ventilation openings. Install the product in accordance with the operating instructions.
SAFETY INSTRUCTIONS THESE IMPORTANT SAFETY INSTRUCTIONS ARE INCLUDED, AS APPLICABLE TO THE APPLIANCE, CONVEYING TO THE USER THE INFORMATION ITEMIZED BELOW 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read instructions - All the safety and operating instructions should be read before the appliance is operated. Retain instructions - The safety and operating instructions should be retained for future reference.
16. 17. 18. 19. 20. 21. 22. c) If the product has been exposed to rain or water. d) If the product does not operate when used according to the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may interfere with the product’s normal operation. e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance-this indicates a need for service.
NEC NATIONAL ELECTRICAL CODE Do not apply oil or petroleum products to this product. CAUTION Invisible laser radiation will be emitted when the product is open and interlocks are defeated. Do not defeat the safety interlocks. GRAPHIC SYMBOLS WITH SUPPLEMENTARY MARKINGS ARE LOCATED ON THE BOTTOM OF THE UNIT. USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash your hands after handling. CAUTION: This product is equipped with a polarized plug (one blade is wider than the other blade) as a safety feature to reduce the risk of electrical shock. This plug will fit into a polarized outlet only one way. This is a safety feature. If you are unable to insert the plug into the electrical outlet, try reversing the plug.
Parts Identification: Power Supply This product is designed to operate on an Alternating Current (AC) power supply. Plug the AC Power Cord into a standard household 120V electrical outlet. Battery Safety Precautions: • Keep batteries away from children and pets. • Do not use rechargeable batteries with this product. • Insert the battery observing the proper polarity (+/−). Failure to properly align the battery polarity can cause personal injury and/or property damage.
To set the clock time: 1. Plug the product into a standard 120V AC electrical outlet. 2. To set the current clock hour(s): a. Press and hold the TIME Button. b. Press the HOUR Button until the desired hour(s) is reached. A red dot appears in the clock LED display next to PM to indicate Post Meridiem hours. c. Release the TIME Button. 3. To set the current clock minute(s): a. Press and hold the TIME Button. b. Press the MIN Button until the desired minutes(s) is reached. c. Release the TIME Button.
To use the sleep function: The sleep function can be used to play and turn off the radio after a set amount of time (up to 1 hour 59 minutes) has elapsed. 1. Slide the ON/OFF/AUTO Switch to the OFF position. NOTE: If using the alarm function simultaneously with the sleep function, set the ON/OFF/AUTO Switch is set to the AUTO position to ensure alarm activation. The alarm function will be set to wake up by the radio. The sleep function cannot be used with the buzzer alarm. 2. Press the SLEEP Button.
