User manual

EXTERNAL INPUT TERMINALS / CONNECTING THE POWER CABLE / ATTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)

1 Turn the plasma display over and place it

screen-first onto a table which has a soft cloth

draped over it.

Place the plasma display in a way so that the

stands hang over the edge of the table.

NOTE:

• Make sure to use a table which can support the

weight of the plasma display and is larger than the

plasma display.

• Make sure the table is in a stable location.

2 Remove the stands from the plasma display.

Unscrew the M5 screws indicated by , and

remove the left and right stands.

3 Attach the left and right TV rails to the plasma

display using the M8 screws included with the

wall mount kit.

indicates the position of the screw holes on

the plasma display

Attach the plasma display to the wall.

NOTE:

• Refer to the instruction manual included with the

wall mount when securing the plasma display to

the wall.

TTACHING A WALL MOUNT BRACKET

(SOLD SEPARATELY)

The following is a description of the method for attaching a wall mount to the plasma display.

When performing this operation, refer to the instruction manual included with the wall mount

kit.

Stand

Plasma Display rear

CAUTION

•Any damage caused by incorrectly attempting to mount the plasma display is not covered under the

terms of the manufacturers warranty.

NOTE:

• The screws and stands you have removed are nec-

essary for reattachment at a later date. Make sure

to keep them in a safe place.

NOTE:

• Only use the screw holes indicated by for

mounting the plasma display.

•For instructions on how to attach the TV rails, refer

to the instruction manual included with the mount

wall kit.