Manual

Recording
Hints for timer recordin8
• if there is a pow,er failure or this unit has been unplugged for more than 30 seconds, the clock setting and al[ timer set-
tings w,irr be Iost.
• Ufa disc is not on the tray, the L_ indicator flashes and timer recording cannot be performed. Please insert a record-
abre disc.
• When aII the timer recording is compIeted, the [_ indicator flashes.To play or eiect the recorded disc, press POWER
button first, and then press PLAY _ or OPEN/CLOSE _ button.
• During timer recording or timer standby ( IF] indicator is on the front display), any operations on the unit will not be
available.To make these operations avaiJable, cancel the timer recording or timer standby first ( L_ indicator disappears).
• To cancel the timer standby mode, press POWER button.
The priority oveHapped settings
of
This unit records the programs according to priority if the timer programmings are overJappe& The timer programming
set previously has priority. A timer recording of [ow,er priority will be canceled, start from the middle, or stop on the
way_ Check the overlapped timer programmings and change the priority if necessary.
• A programming set previously has priority
[] When the starting time is the same: [] When some programming have been
A program set previously (PROG. I) has priority, made at the end time of the
programming currently being recorded:
A program set previously (PROG. 2) has priority.
PROG. I
• When the recording time is partially overlapped:
PROG. I will start after PROG. 2 is complete to be recorded,
l i
i
PROG. I ]]]]]ii_ i]i]i]i!i
PROG. I
• When the recording time is entirely overlapped:
PROG. I will not be recorded.
]
• When the end time of the programming currently being recorded and the starting time
of the one to be recorded sequentially are same:
The first 20-90 seconds of the programming to be recorded sequentially will be cut off.
36
PROG. I
]1_ The first 20-90 seconds will be cut off.