Manual

Changing the SETUP menu
Digital Out
Set the digitaH audio output.
• Select a setting using A / Y
buttons, then press ENTER
button.
Option window wH[ appear.
Proceed to steps A or B.
_[ Settings Dolby Digital (Default : Stream)
for
• Select a setting using A I Y buttons, then
press ENTER button.
Your setting wH[ be activated.
PCM : Convert the DoHby Digital into PCPI(2
channel).
When your amplifier/decoder is NOT corn•
patiNe with Dolby Digital, set to "PCH'.
Stream : Outputs a Dolby Digital signals
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
_1 Settings (Default :Auto)
for PCM
•Select a setting using A /V buttons, then
press ENTER button.
Your setting will be activated.
Auto
48kHz
96kHz
: Select "Auto" usually.
: If your amplifier/decoder is NOT como
patible with 96kHz PCM, select "48kHz'.
96kHz sound will be output in 48kHz.
: If your amplifier/decoder is compatible
with 96kHz PCM, select "96kHz'. 96kHz
sound will be output.
...................
When playing a DVD-RW
disc recorded in VR mode
• If the audio source on a disc is
Dolby Digital fol mat, set _Dolby
Digital" to"PCM" so that you
can switch to main (L), sub
audio(R),or a mix of both (UR)
with your amplifier/dec•den
*1111111==111111111=1111=*
When playing disc with copy-
right protection
• If you select"Auto", the sound
will be down sampled at 48kHz.
. If you select"96kHz', no digital
sound will be output. Select
"Auto", so that outputting
48kHz digital sound.
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
•Select a setting using A / V
buttons, then press ENTER
button,
Your setting will be activated.
Fast Forward with Audio (Default : OFF)
Set to ON to output the sound during play in fast forward of x2.
Setup > Playback
Setup > Playback
Fast Folward with Audio
5
Press SETUP button to exit SETUP menu.
•Select a setting using A / Y
buttons, then press ENTER
button,
Your setting will be activated.