Owner's anLlal Recordable disc ,, We strongly recommend using any DVD-R 8x, MAXELL DVD-R 16x and DVD-RW 4x disc to assure good recording quality. ,, Discs that have been tested and are proven to be compatible with this recorder: VERBATIM DVD-R 8x VERBATIM DVD-RW 2x MAXELL DVD-R 16x JVC DVD-RW 4x DV Connection to a TV (Before you use this unit, you need to complete connections.) If your TV has AUDIO/VIDEO input jacks, see the section "Connections" on pages 13-15.
Before you start WARNING: TO REDUCE TO THERAIN RISKOR OFMOISTURE. FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE The lightning flash with arrowhead symbol, within an equilateraltriangle, is intendedto alert the user to the presenceof uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Before you start iMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5.
Before you start For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit.
Before you start SERVICING • Please refer to relevant topics on "Troubleshooting" on pages 72-75 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. CLEANING THE CABINET Use a soft cloth slightly moistened with a mild detergent solution.
Before you start Before you start ................... 2 Precautions ............................... Table of contents .......................... Features .................................. Symbol in this Owner's Manual .............. Functional overview ........................ Installing batteries in the remote control ....... Using a remote control .................... Display menu ........................... Setup menus ............................ 2 6 7 7 8 10 10 10 11 Connections ................
Before you start This DVD unit not only plays DVDs and CDs but also offers features for you to record to DVD discs and edit them after that. The following features are offered with this unit. Recording This unit is compatible with both DVD-RW, which is rewritable repeatedly and DVD-R, which is available for recording once. You can choose either one for your convenience. Up to 8 program recording: You can program the unit to record up to 8 programs, with in a month in advance.
Before you start 2 3* 4 5 6 7 8*9 (*) The unit can also be turned on by pressing these buttons. 15 1. 2. 3. 4. 5. Disc tray Place a disc when open. Display Refer to "Front Panel Display OPEN/CLOSE __ button* 6. Guide" on page 12. If timer programmings unit in timer-standby During playback, or track. press to skip to the previous During playback, fast reverse. press and hold for 1.5 seconds chapter press to play reverse to step press and hold for 1.
Before you start POWER OPEt_CLOSE TIMER --13* 14 _ 2 --15 m / ml m!718 m TOPMENU MENU/LIST RETURN 6 ENTER --19 5-6 20 __ 21" --22 23 10-REC/OTR STOP CMSKIP --24 11-12 Ii i 25 !i / , (*) The unit can also be turned on by pressing these buttons. 1. 2. 3. 4. 5. 6. 7. / '\ POWER button Press to turn the unit on and off. If timer programmings have been set, press to set the unit in timer-standby mode. ZOOM button During playback, press to enlarge the picture on the screen.
Before you start Installing batteries in the remote control Install two "AA" size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. Note: Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: ,, Do not mix new and old batteries together. ,, Do not use different kinds of batteries together, although they may look similar, different batteries may have different voltages.
-<: Before you start Setup menus Press [SETUP] to display the Setup menu, then press [ENTER] to display each menu, using [A/T]. These menus provide entries to all main functions of the unit. 1.Required Setting: To set up the required setting. 2.Playback: To set up the unit to play discs as you prefer. 3.Display: To set up the OSD screen and the front panel display of the unit as you prefer. 4.Recording: To set up the unit to record to discs as you prefer.
Before you start 4 2 1 ,_,_ I co 6 10:0 020 _.......... U U U U SEP DVD SLPRW Iiii ! ',_ L_ LP EP _, P.SCAN 5 1. Current Statue of the unit II :Appears when disc playback is paused. :Appears when playing a disc. [] :Appears when thetimer programming has been set and is proceeding. Flashes when all Timer Recordings have been finished, or when a program cannot be performed by some reason. REC :Appears during recording process. REPEAT :Appears during repeat play. 2. Disc type 4.
Connections Antenna Cable Antenna rv signal--_-(Sack :or of TV', :" Plug inthe AC power cord of this unit, (Back of this unit) Basic Audio Audio cabl_ (supplied) Better picture Best picture S-Video cabll I Component Video cable (commercially available) i(commercially available)_ AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT "A.er you have completed connections Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Connections (Back of TV) ii<( < (Cable box or Satellite box) Cable TVsign_ Video _ cable (supplied)Y RF cable _lN x9 r'_ _ _ Audio _ cable _(supplied) I ® I<_))itd_ ..... I II With this setup: • You can record any unscrambled channel by selecting the channel on the cable box or satellite box. Be sure that the cable box or satellite box is turned on. • You cannot record one channel while watching another channel.
Connections • When you change the connections, all devices should be turned off. Refer to the operation manual accompanying external devices for more information.
Getting started The following will help you to understand easily how to record to DVD discs. Note: Make sure batteries are in the remote control and 'ou have connected this unit and the TV correctly. Step 1: Choose a disc type. Step 2: Insert a blank disc. There are several types of recordable DVD discs to choose from. Choose a recordable DVD disc type based on your playing/recording/editing requirements.
Getting started Step 3: Select the recording speed. Step 4: Select the desired channel. Step 5: Record on DVD disc. iiiii_7_!_!_! _ iiiii_'_:_i_Ti!i!i!i!i!i!i i_-xl _ i U J i t107OT1 Hint 1: Play the recorded _KIp _J _AUSE '\!_/' ITOI SKIP \ J i CM fKI_ i contents You can select the title you want to play from a displayed menu, and immediately start to play. Recorded contents are easily accessible, with simple procedure of choosing a title on a chapter in the menu screen.
Getting started Turn on this unit for the first time, 4 you need to follow these steps. ........................................................................ Press [ENTER] to start Channel 1 Preset. The unit will start getting channels Press [POWER]. available in your area. 1 2 Turn the TM on. Select the input c.1 to which thetable unit on is page connected. Refer to the Aut0PresettjrlgN0 15. "initial Setting" will automatically appear. 3 Using [A / T], select your desired language for the OSD.
-<_ Getting started Adding/deleting channels 4 The channels you no longer receive or seldom watch can be deleted from the memory. You also may add channels into memory. Select the channel number to add or delete. Press [_] or [CH T] to move to a lower channel number. Press [_] or [CH A] to move to a higher channel number. Press the Number buttons to 1 select a channel number directly. Press [SETUP]. 2 2 3 4 5 Using [A / _], select "Channel". Press [ENTER]. Channel menu will appear.
Getting started You can select a sound channel to output from TV. "Stereo" has 3 been selected as the default. Using [,& / T], select "TV Audio ...................................................................... 4 Select'. Press [ENTER]. | O )tion window will appear. Press [SETUP]. 2 1 -5 Using [_ / T], select "Required Setting". Press [ENTER]. Required Setting menu will appear. Select L2 Video 4 Using [A / V], select "Stereo" "SAP". Press [ENTER]. or 3 4 Stereo: Outputs main audio.
Getting started Set the clock before you try the Timer Programming. If a Public Broadcasting Station (PBS) is available in your area, follow "Auto Clock Setting" below. If not, follow "Manual Clock Setting" on page 22. Auto Clock Setting Make sure , The antenna/Cable TV connections are correct. , If this unit is connected to a Cable Box or Satellite Box, select the local PBS station on them to set the clock automatically. 4 ,, if you do not know your PBS channel number: Using [A / T], select "Auto".
-<_ Getting started Manual Clock Setting _>- ZL................................................................. ...................................................................... Using [j, / _], enter the date 1 (month / day / year). Press [SETUP]. Press [_l/I_] to move the cursor. 2 Using [A / T], select Press [ENTER]. "Clock". 3 Using [A / T], select "Clock Setting". Press [ENTER]. Clock Setting menu will appear.
-<_ Getting started Setting the Daylight Saving Time When "Daylight Saving Time" is "ON", the unit clock will automatically move forward one hour at 2:00a.m. on the first Sunday in April and move back one hour at 2:0Oa.m. on the last Sunday in October. "ON" is selected as a default. _>- 3 Using [J, / T], select "Daylight Saving Time". Press [ENTER]. O ;tion window will appear. o, 1 Press [SETUP]. 4 2 Using [h, / T], select "Clock". Press [ENTER]. Clock menu will appear.
Recording information Recording This unit can record to DVD-R and DVD-RW discs. DVD-R discs can only be recorded once, and cannot be erased. DVD-RW discs can be recorded and erased many times. DVD-R discs can only be recorded in Video mode, while DVD-RW discs can select a recording format between Video mode and VR mode. You can select a recording speed among 6 options, and the recording time will depend on the recording speed you select as follows.
Recording Restrictions on recording You cannot record copy-protected video using this unit. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on the screen. Video that is "copy-once only" can only be recorded using a DVD=RW disc in VR mode with CPRM (see below).
Recording Choosing the recording format of a blank disc 5 When inserting a blank disc, the unit automatically starts to initialize the blank disc. You have to select your desired format before inserting the blank disc. POWE_ Using [A / T], select "Video mode" or "VR mode". Press [ENTER], The recording format will be set. 1 Press [SETUP] to exit. Press [SETUP].
-<_ Recording Reformatting _>- a disc Final confirmation appear. window will If you are using a DVD-RW disc, by default it will be Video mode. You can change it to VR mode from the Setup menu. 1 P3WER T_MER OPEN/_LOSE @ oo ........ @ .@/: A_ _7R7R_ @TUV @ WXYZ SPACE CLE_8 NSPLtY OEF TOP MENU MENU£LIST _TURN Press [SETUP]. RENAT @ SETUP -1 ENTE_ L2 2 Using [A / _'], select "Disc". Press [ENTER]. Disc menu will appear. 3 3 4 5 Using [A / T], select Press [ENTER].
--_ Recording 7 Follow the steps below to record Press [REC/OTR] to start ._v..._r°_.r.12._: ........................................... recording. "®" mark will be displayed I seconds. Press [POWER]. Turn the TV on and be sure to select the input to which the unit is connected. Press [OPEN/CLOSE __]. The disc tray will open. 3 insert your disc with its label facing up. Align the disc to the disc tray guide. 4 Press [OPEN/CLOSE the disc tray.
Recording 4 This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set. When the recording finishes the recorder automatically goes into standby. Press [REC/OTR] repeatedly to select desired recording time. Recording times appear on the TV screen (30 minutes to 8 hours). Recording will start. 3 1 Turn on the unit and lead a recordable disc. Make sure that the TV input is set on the unit. 0:30 ====_ /o:3o...
Recording 4 You can program the unit to record up to 8 programs within a month in advance. Daily or weekly program recordings are also available. * Be sure to set the clock before setting a timer programming. ° Insert a recordable disc. Using [A / _'], enter the Start and End. Press [_]. 1 Press [TIMER PROG.]. Timer Programming list will appear. 5 Using [A / V], select the channel number to record. Press [_]. 2 To record from external Using [_ / _,], select a program select L1 or L2. number. ._ ..
Recording 7 ....................................................................... Press [ENTER] when information is entered. Your program setting will be stored. * To set another program, repeat steps 2 to 7. * To exit, press [TIMER PROG.] or [SETUP]. * When two or more programs are overlapped, "Overlap" and the overlapped program number will appear on the TV screen. Press [POWER] to set a Timer Programming. [] indicator will appear on the front panel display. 1 4 Press [POWER].
Recording Hints for Timer Recording ,, If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. ,, If a disc is not on the tray, the [] indicator flashes and Timer Recording cannot be performed. In some cases, the [] indicator appears momentarily around the start point as the unit attempts to record. Please insert a recordable disc. ,, When all the Timer Recording is completed, the [] indicator flashes.
Recording Connection to an external source Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear). When connecting an external equipment of monaural output to this unit, use AUDIO L jack of MNE2 (Front). Use commercially available S-Video or Video cable and an Audio cable for this connection. Frontof this unit j Rear of this unit 1. Press (SETUP]. 2.Using [A/T], 3.Using 4.Using [A /_'], select "Required Setting". Press (ENTER].
Recording Recording from an e×ternal source Before recording from an external source, see the instructions for the connection 1.Turn the TV and this unit on, and be sure to select the input of the TV to which the unit is connected. Refer to the table on page 15. 2.Press [OPEN/CLOSE record properly. __] to open the disc tray. Place the disc to 3.Press [OPEN/CLOSE _] to close the disc tray. on page 33. .@/: _ POSS _ A_ DEF _p_ASc_ T_O _ _YZ @ I I _E_TpT REPEAT @ (op / 4.
Recording You will need to finalize discs recorded in Video mode to play in other DVD players. Finalizing may take several minutes up to an hour. (A disc recorded in Video mode can take up to 15 minutes. A disc recorded in VR mode can take up to 60 minutes.) A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. Details are on pages 24-25. 1 4 Using [A / T], select Press [ENTER]. Finalizing will start. "Yes".
Recording _>- Auto finalize You can finalize discs automatically using Auto Finalize function. You can use this function to finalize discs after finishing all Timer Recordings and at the end of the disc space. 4 OPEN,CLOSE POWER Using [A / _'], select "Disc Full" or "End of Timer Rec". Press [ENTER]. Option window will appear. @/: G_ _) ABG 0EF JKL i_0 I_SPLAY SPACE CLEAR C) C> @ TOP_E_U MENUFLISTRETURN 1 OH q© qop q) 1 (---h-- -6 SEtUp f ENTER OO_h_ L2 Press [SETUP].
Playing discs Before you play DVD discs, read the following information. Playable discs This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements for Region Codes and Color Systems as described followings. Discs that have the following Iogos will play on the unit. Other Disc types are not guaranteed to play. Color systems DVDs are recorded in different color systems throughout the world.
Playing discs Playback 1 Press [POWER]. Turn the TV on and be sure to select the input to which the unit is connected. JAN/1/061:00AM CH12 -2 4 8 XP 2 5 Press [OPEN/CLOSE __]. The disc tray will open. [MENU / LIST] -6 7 3 REC SPEED insert your disc with its label facing up. Align the disc to the disc tray guide. 7 JAN/1/061:00AM CH12 REV $rJp PLAY S_P STOP ¢_ SKIP i ) REC/OTR XP FWD PAUSE i ) To exit the title menu, press [STOP m] or [RETURN _J ]. .......................
-<_ i 1 Playing discs iiii!iiii_i iiiiiiiii _>- ,_,.................................................................. Press [PLAY _] to start play-2 back. PR_. F_ Press [POWER]. Turn the TV on and be sure to select the input to which the unit is connected. 2 Press [OPEN/CLOSE __] to open the disc tray. The disc tray will open. 3 .@/: A_ #EF ®®_® Playback will start. If you are playing a DVD-Video disc, a menu may appear. Refer to page 40 for details about the Disc menu.
Playing discs Playing discs using the Disc A DVD disc contains a Disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection. Sometimes these are displayed automatically when you start playback, otherwise only appear when you press [MENU / LIST]. 1 Press [MENU / LIST]. The Disc menu will appear. If the feature is not available, _ may appear on the TV screen.
Playing discs Resume play L d;il 2 You can resume play from where you stopped playing the disc last. 1 During playback, press [STOP _]. The resume message will appear. Fast forward Press [PLAY _]. In a few seconds, play will resume from the point at which it stopped last. You can resume play at the same point even if you turn off the unit. [;b :0,:0 ....... R® ® To cancel the resume play and start playing the disc from the beginning, press [STOP m] the second time while the play is stopped.
Playing discs Rapid Play _ Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback. _,l'.h : : 1 During playback, [D_x1.3/0.8]. : press Press [_xl.3/0.8] once during playback. Plays back approximately at 0.8 times of normal playback. Press [_xl.3/0.8] twice during playback. Plays back approximately at 1.3 times of normal playback.
Playing discs Zoom m pOWER OPENICLOSE TIMER 2 1 During playback, press [ZOOM]. Zoom menu will appear. _: Using [A / _], select a desired zoom factor to zoom. Press [ENTER], The zoom area will be displayed. ABC ©© ©© _SpLAy DEF (31) _O p_No CH @@ wxYz SPACE CLEAR REP[AT SNUP TOP MENU MENU/LISTRETURN B_TER m ,!F There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate. Marker 3 Using [A / T / _ / _], select a desired zoom position.
Playing discs Title/Chapter Using [SKIP _ search PORS / _,.t] 1 TUV MN0 CH _X_Z REPE_ NS_L_y SNCE CL[AR SETUP @ @ C} Q} TOP MENU NENU/LI_ NETUSN E_EN During playback, press [SKIP _] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. * If there is no chapter in one title, the current title will be skipped. snP To go back to the beginning of the current title or chapter, press [SKIP _,q].
-<_ Playing discs _>- Track search TOP MENU Using [SKIP _ MENL_UGT RETURN E3_TER / IHH] 1 During playback, press [SKIP I_l] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [SKIP P,_I]. Press it repeatedly to go to the previous track. The track wi[[ move backward one at a time. Using il_x1_o 8 SFJp PAUSE SKiP [DISPLAY] 1 pOWER During playback, press [DISPLAY]. The Display menu wi[[ appear.
Playing discs Repeat playback Title: The current title will be played repeatedly. (DVD only) 1 During playback, press [REPEAT]. Repeat menu will appear.
Playing discs Program play 4 You can program the disc to play in your desired order. 1 Using [A / T], select a desired track. Press [ENTER] or [1_]. A cursor will move to next. Press [SETUP]. 2 Using [A / _], select "CD Pmayback Mode". Press [ENTER]. CD Playback Mode menu will appear. 3 5 Using [A / T], select "Program Play". Press [ENTERI. Program Play list will appear. Press [PLAY _,-] to start program playback. Program playback will start. " Note To erase tracks you selected, press [CLEAR].
Playing discs Switching audio soundtrack
Playing discs 3 Using [A / _'], select "OFF", "Type 1" or "Type 2". Press [ENTER]. Switching camera _- , OFF: no effect , Type 1: Natural effect , Type 2: Emphasized effect i, ¸_¸¸ , 3 angles Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes. 2 Using Press Angle press POWER TIMER OPEN'LOSE @ oo ........ C:) [_1 / I_], selectS. [ENTER]. will switch each time you [ENTER].
Editing Guide to a title list Editing Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this screen and easily edit the titles as you prefer. Press [TOP MENU]. discs in Video mode You can edit discs in Video mode for the following items. Be sure that once you edit titles, they will not remain as original.
Editing Deleting titles You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title in the title list on DVD-RW disc is deleted, the disc space to record will be increased. For DVD-R disc, the disc space to record will not be changed. You cannot select "Chapter Mark" when a DVD-R disc is inserted into the unit. "Chapter Mark" does not work on the title less than 5 minutes. 4 Using [A/T], select "Title Delete".
Editing Putting names on titles 3 You can put title names titles and change this menu. The names on the the names from OPEN£LOSE TIMER Using [A / T], Press [ENTER]. select @co@ "Yes". The name you entered activated for the title. you put on the titles will be displayed pOWER zoo_ pROG. will be J© © on a Title List. 1 TOPNENU NENUfLIST NETURN BNEN L1 Follow steps 1 to 3 on page 51 to display the Using [A / _], Name". Edit menu.
Editing Setting or clearing chapter markers 3 You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can set chapter markers at a specified time you selected for titles with more than 5 minutes. 1 Follow steps 1 to 3 on page 51 to display the Edit menu. Using [A / T], select "Chapter Mark". Press [ENTERI. C _tion window will appear. Using [A / T], select "Yes". Press [ENTER], The marker will be added or deleting.
-<_ Editing Deleting _>- titles When a title is deleted from an Original list in VR mode, the disc space to record will be increased. Be advised that the titles once deleted cannot be brought back to the disc. 4 Using [A / T], select "Title Delete". Press [ENTER]. Confirmation window will appear. pOWER @?}o@ GHI G) PORS 1 m Press [TOP MENU], and then press [MENU / LIST] to change "Playlist" to "Original". Original list will appear. 2...............................................................
Editing Setting titles _>- to protect To prevent accidental editing, or erasing the titles, you can protect them from the Original menu. 1 Follow steps 1 to 3 on page 54 to display the Original menu. Using [A / T], select "Protect". Press [ENTERI. C )tion window will appear. 3 f After this operation is completed, press [RETURN _J ] and then [RETURN _J ] or [STOP m] to exit. Data will be written onto the disc momentarily. POWER T_MER OPEN/_LOSE @ c>c:> ........
-<: Editing Releasing titles from _>- protecting f You are allowed to release the After this operation is corntitles protecting feature once pleted, press [RETURN _-J ] and protected, then [RETURN _J ] or [STOP m] ....................................................................... 4 to exit. | Data will be written onto the disc Follow steps 1 to 3 on page 54 to momentarily. display the Original menu. Using [A / T], select "Protect". Press [ENTER]. C )tion window will appear.
-<_ Editing Deleting _>- titles 4 In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not be increased. f Using [A / V], select "Title Delete". Press [ENTER]. Confirmation window will appear. POWER T_MER OPEN/_LOSE @ c>c> ........ {:) GH_ JKL i_0 Gb G> @ PaRS 1 _SPLAY TUV wx_s SPACE CLEAR C> {03 {3 Press [TOP MENUI, and then press [MENU / LIST] to change "Original" to "Playlist".
Editing Dividing a title 3 You can divide a title into two new titles, After this operation is completed, press [RETURN -,J ] or ....................................................................... 4 [STOP m] to exit. | Data will be written onto the disc Follow steps 1 to 3 on page 57 to momentarily. display the Playlist menu. Using [A / _'], select "Title Dividing". Use [SKIP I_ / _1], [REV _1_1],[FWD _,_], [PLAY _] and [PAUSE ||] to decide the point at which you will divide the tile, Press [ENTER].
Editing Combining titles You can combine two titles into a single title. 1 3 Using ['_l/_], select "Yes". Press [ENTER]. Two titles will combine into a single title. Follow steps 1 to 3 on page 57 to display the Playlist menu. Using [A / T], select "Title Combining". Press [ENTER]. Title Combining setting window will appear. Selected title grays oul and the frame of the next title becomes yellow.
-<_ Editing Adding titles _>- to a Playlist The added title will appear as the final title. POWER You can add or delete a title in the Playlist as you prefer. You can add titles to a Playlist up to 99. TIMEI OPENICLOS£ @ o<> ........ @ O>d>_)N 1 JAN/1/061:00AM Follow step 1 on page 57 to display the Playlist. Next to the final title, "Add New Title" "Delete Playlist" menu is shown. CH12 XP PQRS TUV _ _p LTDCP WXYZ I_SPLAy SPACE CLEAR REPEAT SETUp O_OO TOP &IEtU M£NU_LIST ......
Editing Deleting parts of titles You can delete a specific part of a title. Even when parts of title are deleted from the Playlist, the original title will remain as it is. The disc space to record will not be increased. 1 Press [TOP MENU], and then press [MENU / LIST] to select "Original" or "Playlist". 2 Using [A/_' / _1 / I_], select the desired title• Press [ENTER]. Option window will appear. [FWD _,_], [PLAY I_] and [PAUSE ll] to decide the start point, then press [ENTER].
Editing Putting names on titles 4 You can put title names titles and change this menu. The names on the the names from [_,/_], Press [ENTER]. select "Yes". The name you entered activated for the title. you put on the titles will be displayed Using 3 will be on a Title List. 1 Follow steps to display menu. 1 to 3 on page Original 61 [-2 3 4 or Playlist 2 Using [A / V], Name", Press A window select "Edit Title 5 [ENTER]. for entering a title name will appear.
Editing Setting or clearing chapter markers You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search feature. You can put a chapter marker anywhere you want. When the number of chapter markers in the Playlist comes to 999 in total, you cannot add any more chapter markers, ,, You cannot delete the first chapter of each title. 1 4 Follow steps 1 to 3 on page 61 Using [A / T], select "Yes".
-<_ Editing Setting pictures _>- for thumbnails 4 You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default. POWER TIMER OPEN/_LOSE @ <> ........ o @ After this operation is cornpleted, press [RETURN -J ] and then [RETURN -,_ ] or [STOP m] to exit. Data will be written onto the disc momentarily.
Changing the Setup menu The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup 1.Language setting Pages 66-67 items (highlight is the default) Disc Menu Contents Set the language for the Disc menu. Set the language for audio. 2.Display 3.Audio setting Pages 67-68 setting Pages 68-69 Subtitle Set the language for subtitle. OSD Language Set the language for OSD (On Screen Display).
-<_ Changing the Setup menu i Press [STOP m] if you are playing a disc. _>- i POWER 1 TIMER OPEN/CLO_ ® _ ........ @I: Press [SETUP]. 2 Using [A / T], select "Playback". Playback menu will appear. DEF P3RS TUV W×YZ REPEAT _S_L_ SPACE CLEAR SETUP Press [ENTER]. 3 TOP _E_U ME_U_LISTREfURN Using [A / T], select "Language". Language menu will appear. Press [ENTER]. 4 _E¢SPEED _ Using [A / T], select a desired item. Press [ENTER].
-<_ Changing the Setup menu 5 Press [SETUP] to exit. Press [STOP m] if you are playing a disc. 1 Press [SETUP]. 2 Using [,_ / _'], select "Display". Display menu will appear. Press [ENTER]. 3 Using [A / T], select a desired item. Press [ENTER]. OSD Language (Default : English] Set the language for OSD. Using [A / T], select a setting. Press [ENTER]. Your setting will be activated.
-<_ Changing the Setup menu _>- FL Dimmer [Default : Bright) Set the brightness of front panel display. You can choose one among "Auto", "Bright" and "Dark". Using [A / _'], select a setting. Press [ENTER]. Your setting will be activated. , If "Auto" is selected, the display is shown brighter when the power is on, darker when the power is off. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 4 Press [SETUP] to exit.
Changing the Setup menu _l Settings for Dolby Digital (Default : Stream) Using [A / T], select a setting. Press [ENTER]. Your setting will be activated. PCM :Convert the Dolby Digital into PCM(2 channel). When your amplifier/decoder is NOT compatible with Dolby Digital, set to "PCM". Stream :Outputs Dolby Digital signals. When your amplifier/decoder is compatible with Dolby Digital, set to "Stream". Dynamic Range Control (Default : ON) Set to ON to compress the range between soft and loud sounds.
-<_ Changing the Setup menu _>- 6 Using [_ll / D,-], select "Yes". Press [OK]. 7 _-; ................. I0 6 Using [A /T], select "Yes" within ....... _ 15 seconds. Press [OK]. 7 ....... 8 Press [SETUP] to exit. Still Mode (Default : Auto) Set the type of still image in pausing playback. [ Press [STOP _] if you are playing a disc. ] 1 3 4 5 Press [SETUP]. 2 Using [A / _], select "Playback". Press [ENTER]. Auto: Field: 3 Using [A / T], select "Video". Press [ENTER].
-<_ Changing the Setup menu _>- Parental Lock (Default : All) Set the Parental Lock level. Using [A / _], change the parental level. Press [ENTER]. Option window will appear Proceed to step A or B.
Others Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Power The power does not turn on. ,Check that the AC power cord is connected securely. ,(In case of power failure) Check the breaker. Picture There is no picture. , Re-connect the connecting cords securely. ,Check if the connecting cords are damaged.
Others Playback The disc does not play. ,No disc is inserted. ,A blank disc is inserted. ,The disc is upside down. insert the disc with the labeled side facing up. ,The disc is not correctly inserted. ,The unit cannot play certain discs (such as a CD-ROM) (page 37). ,The region code on the DVD-Video does not match the unit (page 37). ,Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates (page 4).
Others Others The unit does not operate properly. ,When static electricity, etc., causes the unit to operate abnormally, unplug the unit and then plug it in again. The disc tray does not open when you press [OPEN/CLOSE __]. ,It may take a few seconds for the disc tray to open after you have recorded or edited a disc. "Repairing" appears on the TV screen. ,If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after "Wait for a moment.
Others You are trying to record onto the disc on which the number of recording titles comes up to the maximum (99). Delete unnecessary titles (pages 51, 54). Recordinq Error J You cannot record more than 999 chapters on one disc. (The maximum is 999) You are trying to record onto the VR mode DVD-RW disc on which the number of recording chapters comes up to the maximum (999). Delete unnecessary markers (page 63). [ Recording Error ] You cannot record on this disc as Control Information is full.
Others Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high).
Others System Power requirements Power consumption Weight Dimensions (width x height x depth) Operating temperature Operating humidity TV format DVD-Video, DVD-RW/R, CD-DA, CD-RW/R AC120 V, 60 Hz 20 W (standby: 2.8 W) 5.1 Ibs (2.
Espaffoi Estas instrucciones le ayudarb, n a entender fb,cilmente c6mo grabar discos DVD. Nota: AsegQrese que las pilas estb_n en el mando a distancia y que ha conectado correctamente esta unidad y el TV. Paso 1: Elija un tipo de disco. Puede elegir entre distintos tipos de discos DVD grabables. Elija un tipo de disco DVD grabable de acuerdo con sus necesidades de reproducci6n/ grabaci6n.
Espahol Paso 3:Seleccione la velocidad de grabaci6n. --yvy Paso 4:Seleccione el canal des eado. Paso 5:Grabe en discos DVD. _" r Sugerencia 1: Reproduzca el contenido Puede seleccionar el fitulo que desea reproducir de un menO indicado y empiece a reproducir inmediatamente. El contenido grabado se puede acceder faciimente con un simple procedimiento de elegir un fitulo en un capitulo en la pantalla del menQ. Inicio de grab.
SYLVAMiA LiMiTED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
DVD Recorder 1 G This unit is compatible DVD-VIDEO _ v DVD-RW (VIDEO/VR to play the following discs. CD-DA (AUDIO CD) _]_ ED E o mode) DIGl_L_dJ[_lO CD-RW (CD-DA FORMAT) _[j_o_ CD-R (CD-DA FORMAT) _o_}_ ,w DVD-R (VIDEO mode) _ R 4.7 _L'_/Dis a trademark of DVD Format/Logo Licensing Corporation. ®DVD+R/+RW discs can be played back only on this unit. This unit can record to DVD-R and DVD-RW discs. DVD-R discs can only be recorded to once, and cannot be erased.
• You can set up to 8 programs (once, daily or weekly). Be sure to set the clock before starting a timer programming. 1- How to select Select the recording speed. the recording Timer speed: Programming list appears. Select any blank line with [_ / v] and press [ENTER]. I DISPLAY TOP MENU RECSPEED REY Selectthe channel.
