Blu-ray Disc Player Owner's Manual

25EN
PLAYBACK
You can play back the specific part (between point A and
point B) repeatedly.
1 During playback, press [A-B] at the desired
starting point A.
2 During playback, press [A-B] at the desired
ending point B.
As soon as you set the point B, the part between point
A and point B will start playback repeatedly.
• To cancel the A-B repeat, press [A-B] again.
You can play back the disc/card in your desired order.
1 In stop mode, press [MODE].
• The program screen will appear.
2 Use [K / L] to select a track / file, then press
[ENTER].
• For JPEG files, use [K / L] to select a folder, then press
[ENTER] first, and then use [K / L] to select a file, then
press [ENTER].
•Press [CLEAR] to erase the last file of the program.
•Use [K / L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
•Use [s / B] to go back/forward between the
hierarchy of folders.
3 Press [PLAY B] to start program playback.
• Programmed file list will appear and the program
playback will start.
To exit from the program playback mode:
•Press [RETURN ] in stop mode.
A-B Repeat
Note
• Point B should be set within the same title or track as
point A.
• A-B repeat is not available with some scenes.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during chapter, title,
track, group or all repeat playback.
Program Playback
audio CD
JPEG
:
:
Track information
File information
audio CD
JPEG
:
:
“CD-DA” will be displayed.
Current disc, SD Memory Card, or
folder name will be displayed.
Track / File list : Track / File list in the original
order.
Programmed list : Track / File list in the
programmed order.
Cumulative playback time of all tracks / files in the
programmed list.
Playback status
Current page / Total page number
0 : 26 : 24
CD_DA
0:36
1:14
0:45
0:50
0:53
0:20
0:54
8
9
10
11
12
13
14


1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
- - / 16
1 62 3 4
7
5
8
Program Total
Page Prev Page NextPage DownPage Up
e.g.) audio CD
1
2
3
4
5
6
7
Operation guide: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the next
page in the programmed list.
Note
• During program playback, press [STOP C] once to
set the resume point, and then press [PLAY B] to
resume program playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (JPEG).
• During program playback, press [STOP C] twice to
display the program screen. To go back to the
normal program playback, press [RETURN ] to
exit from the program screen, then press [PLAY B].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until “ All”
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
• Press [MODE] to switch to the random playback mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the program info.)
8
0 : 26 : 24
CD_DA

2 / 16 0 : 01 : 05
1:14
0:50
1:14
0:50
0:53
0:54
0:36
2
4
9
11
12
14
8
Program
Total
Page Down
I
NTRODUCTION
C
ONNECTIONS
PLAYBACK F
UNCTION
S
ETUP
O
THERS
E5K41UD_EN.book Page 25 Wednesday, December 24, 2008 11:07 AM