OWNER’S MANUAL SYLVANIA COLOR TV/VCR/DVD TRIPLE COMBO RSEC720E (20 inch) INSTRUCCIONES EN ESPAÑOL INCLUIDAS. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
PRECAUTIONS IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
LOCATION WARNING For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top or bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . .5 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE .5 WARNING . . . . . . . . . . . . . . . . . . . .5 SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . . . . . . . . .5 C TABLE OF CONTENTS . . . . . . . . . .6 C FEATURES . . . . . . . . . . . . . . . . . . . .7 C OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . . . . . . . . . . .9 C PREPARATION FOR USE . . .
FEATURES TV/VCR Mode • Hi-Fi system–The Hi-Fi stereo recording system • 2 Step picture search operation–You can view a • • Three different playback tape speeds : SP/LP/SLP • Two different recording tape speeds : SP/SLP • Auto Head Cleaner–Automatically cleans video • • offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz and 0.005% wow and flutter.
DVD Mode ¡Parental lock ¡Dolby Digital sound This TV/VCR/DVD can handle Dolby Digital surround sound having 5.1 channels when connected to a Dolby Digital decoder. You can set the control level to limit playback of discs which may not be suitable for children. ¡Automatic detection of discs This unit automatically detects if the loaded disc is DVD, audio CD or MP3 on disc.
OPERATING CONTROLS AND FUNCTIONS - TV/VCR/DVD FRONT PANEL - [Fig.1] DVD buttons DVD SEARCH 1 3 2 4 3 - REMOTE CONTROL - POWER PICTURE 1 22 23 2 3 4 5 6 7 8 27 28 29 30 31 32 33 0 SPEED 5 45 44 CH. 11 VOL. 2 MUTE PLAY STOP DISC MENU RECORD DISPLAY ENTER SETUP TITLE RETURN CLEAR SEARCH MODE REPEAT A-B AUDIO ANGLE MODE SUBTITLE TV/VCR 7 8 9 10 11 SELECT +10 C.RESET V.SURR 6 [Fig.
46 47 48 - 10 - EN 1C29
46. ANT. in Jack Connect to an antenna, cable system or satellite system. 47. Power cord Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the power cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. 48. COAXIAL digital audio out Jack Connect to the digital input of an external amplifier or decoder for DVD audio only.
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/VCR/DVD channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box.
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD) Use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck. NOTES: • The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) When using this unit to play a DVD disc in a 5.1 channel Dolby Digital surround format, the unit outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the unit up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters. Use audio coaxial digital cables available at retail for the audio connections.
TV/VCR SECTION SET UP FOR USE SELECTING THE LANGUAGE CLOCK SET UP (AUTO / MANUAL) TV/VCR 1 TV/VCR Plug in the TV/VCR/DVD power cord The TV/VCR/DVD clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the unit, then set to [ON] the auto clock setting which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed.
5 Select the year Press the Arrow button K or L until your desired year appears. (Example: 2004) Then press the Arrow button B. 6 Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then press the Arrow button B. 7 Select the minute Press the Arrow button K or L until the desired minute appears.
NOTE: During Auto Clock CH Search, the picture may be distorted, this is normal. 4 DAYLIGHT-SAVING TIME Enter the channel number that contains the Automatic Clock Setting Signal Select this feature and the unit’s clock automatically will advance one hour in April, then reverse one hour in October. When Daylight-Saving Time is ON, the clock will change automatically as follows: • First Sunday of April : At 2 AM the clock immediately changes to 3 AM.
DELETING (OR ADDING) CHANNEL(S) CHANNEL SET UP TV/VCR You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3), then select the channel to be viewed on the Cable Box or Satellite Box. Make sure ... • Press the POWER button to turn on the unit.
TV OPERATION WATCHING A TV PROGRAM PICTURE CONTROL TV/VCR The TV/VCR/DVD’s picture controls – BRIGHT, 1 Turn on the unit Press the POWER button to turn on the unit. 2 Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control. Note for using the Number button on the remote control: ¡You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).
CLOSED CAPTION SYSTEM 1 TV/VCR You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want. 1-2: You may get these captions or text information by selecting either “1” or “2”.
V-CHIP SET UP SUB RATINGS V-CHIP SET UP TV/VCR V-CHIP SET UP 1 Make sure ... • The unit is turned on. 1 Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button. 2 Select “TV RATING” Press the Arrow button K or L to select “TV RATING”. Then press the ENTER button. 4 Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button.
CHANGING V-CHIP BLOCKED PROGRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] and [2]. 2)Press the Arrow button K or L to select "TV RATING". Then press the ENTER button. Select a TV rating to be unblocked by pressing the Arrow button K or L. Then press the ENTER button to unblock the rating.
MTS(Multi-Channel Television sound)SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE TV/VCR When you play a VHS tape, or receive a broadcast on the unit tuner channel you are watching, the status shown below will appear when you press the DISPLAY button on the remote control.
SELECTING THE MTS SYSTEM TV/VCR TO SELECT MONO MODE Make sure ... • The unit must be turned on. You can change the selection to “MONO” if you want to listen to HIFI tapes in normal audio playback. 1) Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2) Press the Arrow button K or L to point to “VCR AUDIO”. 3) Press the ENTER button until [MONO] appears. 4) Press the SETUP button on the remote control to return to TV mode.
VIDEO CASSETTE This TV/VCR/DVD will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS INSERTING A CASSETTE • Avoid moisture. Moisture condensation may occur Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the unit. The unit will automatically turn on.
PLAYBACK NORMAL PLAYBACK SLOW MOTION TV/VCR TV/VCR If the erase-protection tab has been removed, the unit will start playback automatically. Press the PAUSE button, then press the F.FWD g button to start the playback in slow motion. The unit mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than 5 minutes, the unit will automatically go into the Stop mode. Make sure ... • The unit must be turned on.
SPECIAL PLAYBACK Make sure ... • The unit must be turned on. • Insert a prerecorded tape. RENTAL PLAYBACK TV/VCR This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button. 2 1 Exit the Rental setting 2 Start playback Press the PLAY button to start playback. “RENTAL PLAY B” appears.
SEARCH Make sure ... • The unit must be turned on. • Insert a tape. TIME SEARCH TV/VCR ZERO RETURN TV/VCR This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Press the C.RESET button repeatedly.
INDEX SEARCH 1 TV/VCR This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the RECORD button is pressed. It will also be marked at the starting point of Timer recording and OTR. • The index mark will not be recorded if the PAUSE button is pressed and released during recording.
RECORDING Make sure ... • The unit must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: • This unit will ONLY record and view the same channel. • This unit cannot record the contents from the built-in DVD. SKIPPING UNWANTED SCENES DURING RECORDING NORMAL RECORDING TV/VCR You can ONLY watch the same TV program that is being recorded.
OTR (One Touch Recording) Push(es) 1 push 2 pushes 3 pushes Display 17 pushes 8:00 0:30 1:00 Recording length (normal recording) 30 minutes 60 minutes 480 minutes COPYING A VIDEO CASSETTE (Requires a VCR or camcorder) TV/VCR You can make copies of video tapes made by friends or relatives for your enjoyment. You can not copy a DVD to a videotape. WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
TIMER AUTOMATIC TIMER RECORDING 1 Select “TIMER PROGRAMMING” Press the SETUP button on the remote control. Confirm “TIMER PROGRAMMING” is pointed by pressing the Arrow button K, then press the ENTER button. • If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow steps [3] to [8] on pages 15, 16. Then set the timer recording. - TV/VCR SETUP - TV/VCR You may set the unit to start and end a recording while you are away.
5 Set beginning hour Press the Arrow button K or L until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then press the Arrow button B. 6 Set beginning minute Press the Arrow button K or L until the desired minute appears. (Example: “30” for 7:30PM) Then press the Arrow button B. 7 Set end hour Press the Arrow button K or L until the desired hour appears. (Example: “8, PM” for 8:50PM) Then press the Arrow button B.
TO CHECK THE BEGIN/END TIME 3 1)Press the POWER button so that the Recording indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode. 4 TV/VCR • Make sure the channel you want to record is prop- • • • • • Watch the recorded program Press the PLAY button.
ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: When the Closed Caption mode is ON: • Counter mode: After 5 seconds, only the counter • The On Screen Display disappear after 5 seconds. • This is true even if the MUTE button is pressed or • remains.
DVD SECTION ABOUT THE DISCS PLAYABLE DISCS DISC TYPES The following discs can be played back on this TV/VCR/DVD. ¡DVD video ¡DVD-R/RW* ¡DVD+R/RW* ¡Audio CD ¡CD-R/RW* ¡MP3* * Depending on the types or the writing method of the medium some discs can not be played. [DVD] Data on a DVD is divided into sections called "titles" and then into subsections called "chapters", each of which is given a title or chapter number.
PLAYING A DISC BASIC PLAYBACK DVD-V CD GENERAL FEATURES MP3 DVD-V Getting started ¡Turn on the power of amplifier and any other com- ponents, if necessary. 1 Press the POWER button. ¡The power will turn on. 2 Press the OPEN/CLOSE button to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DVD may contain menus to navigate the disc and access special features.
FAST FORWARD/REVERSE SEARCH RESUME DVD-V CD MP3 DVD-V 1 During playback, press the STOP button. ¡Resume message will appear on the TV screen. ( h /g) button for a few seconds. ¡“ g 1” or “h 1” appears on the screen. from the point at which playback was stopped. ¡To cancel resume, press the STOP button twice. ¡If TV/VCR/DVD is turned off, resume function will be cancelled. ¡For MP3, playback will resume from the beginning of the track at which playback was stopped.
SEARCH FUNCTION TRACK SEARCH TIME SEARCH CD MP3 DVD-V There are three ways to begin playback on an Audio CD and MP3 at a specific track. CD 1 During playback, press the SEARCH MODE button three times (CD: twice) to display the Time Search on the TV screen. Using the Number buttons on the remote control 2 Within 30 seconds, enter a desired disc 1 Press the Number buttons to enter the time using the Number buttons on the remote control. desired Track number.
SPECIAL PLAYBACK FUNCTION REPEAT PROGRAM REPEAT is available only during playback. CD REPEAT TITLE / CHAPTER DVD-V 1 In stop mode, press the MODE button. ¡The PROGRAM screen will appear. To activate the repeat function, press the REPEAT button during playback. ¡The repeat mode changes as described below every time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) NOTES ¡Repeat Title/Chapter is not available with some scenes.
PLAYING A MP3 DISC MP3 PLAYBACK PROGRAM MP3 MP3 When a CD with MP3 files is in the unit, press the DISC MENU button to call up the MP3 menu on the TV screen. 1 In stop mode, press the Arrow button (K/L) This feature allows you to program an MP3 disc to play in a desired sequence. 1 In stop mode, press the MODE button. ¡The PROGRAM screen will appear. to select the desired group or track. ¡If a group is selected, press the Arrow button B or the ENTER button to go on to the track selection screen.
CHANGING THE SETTINGS SUBTITLE LANGUAGE CAMERA ANGLE DVD-V DVD-V The TV/VCR/DVD allows you to select a language for subtitles during DVD disc (if available) playback. Some DVD discs contain scenes which have been shot simultaneously from various angles. You can change the camera angle when the ( ) icon appears on the screen. 1 Press the SUBTITLE button during playback. 2 Press the SUBTITLE button repeatedly to select your desired subtitle language.
THE ON-SCREEN INFORMATION DVD-V CD MP3 You can check the information about the current disc by pressing the DISPLAY button on the remote control. For DVD-Vs For audio CDs 1 Press the DISPLAY button during playback to show current Chapter. to show the current Track. ¡The elapsed and remaining playing time of the cur- ¡The elapsed and remaining playing time of the current chapter will be displayed. 1 Press the DISPLAY button during playback 9/49 rent track will be displayed.
CHANGING THE DVD SETUP ITEMS LANGUAGE SETTING DVD-V Language options are not available with some discs. 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice. SETUP QUICK CUSTOM INITIALIZE 2 Press the Arrow button L to select CUSTOM, then press the ENTER button. ¡CUSTOM mode will appear. 3 Press the Arrow button (K/L) to select “LANGUAGE”, then press the ENTER button to confirm.
DISPLAY SETTING AUDIO SETTINGS DVD-V DVD-V You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD discs. 1 Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice.
CONTROL LEVELS PARENTAL CONTROL ¡ALL DVD-V All parental lock is cancelled. ¡Level 8 DVD software of any grade (adult/general/children) can be played back. Parental Control limits the disc viewing that exceed your settings (with a password or playback will stop). This feature allows you to prevent discs with alternative scenes from being played by your children. ¡Levels 7 to 2 PARENTAL LEVEL ¡Level 1 Only DVD software intended for general use and children can be played back.
TROUBLESHOOTING GUIDE If the TV/VCR/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the TV/VCR/DVD, consulting the following checklist. PROBLEM No power The TV/VCR/DVD does not respond to the remote control CORRECTIVE ACTION • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. • Check if the power plug is connected to an AC outlet. • Check the batteries in the remote control.
PROBLEM Picture OK, Sound Poor Timer recording is not possible Cannot go into Record mode Playback picture is partially noisy No picture but the audio is OK in playback No operation by infrared Remote Control Video or color fades in and out when making a copy of a video tape Different color marks on screen CORRECTIVE ACTION • Try a new channel, if OK, then possible station trouble. • Check for local interference. • Make sure the timer recording is set correctly. • Make sure the power is off.
DVD Mode PROBLEM No picture Disc cannot be played No sound No DTS audio is output Distorted picture Audio or subtitle language does not match the set up The camera angle cannot be changed Audio or subtitle language cannot be changed “Prohibited icon” appears on the screen, prohibiting an operation CD sound dropout No CD reproduction DVD picture dropout DVD picture freeze DVD picture in mosaic No DVD reproduction CORRECTIVE ACTION • Insert a correct video disc that plays on this unit.
MAINTENANCE CABINET CLEANING • Wipe the front panel and other exterior surfaces of • the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry. Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING SERVICING • Automatically cleans video heads as you insert or • 1.Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner. 2.
SPECIFICATIONS GENERAL SPECIFICATIONS TV/VCR CRT 20 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 52 PANEL FRONTAL DEL TELEVISOR/DVD. . . . . . . . . . 52 MANDO A DISTANCIA . . . . . . . . . . . . . . . . . . . . . . . . . 52 VISTA POSTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 53 CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 53 CONEXIÓN A TOMAS DE ENTRADA EXTERNA. . . . 53 PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 54 MODO DE ENTRADA EXTERNA . .
30. Botón CLEAR Para cancelar ajustes. 31. Botón MODE Activa el modo de reproducción programada o el modo de reproducción aleatoria. 32. Botón SEARCH MODE Presione este botón para localizar un punto deseado. 33. Botón AUDIO Presione este botón para seleccionar un idioma de audio o el modo de sonido deseado. 34. Botón SUBTITLE Presione este botón para seleccionar el idioma de subtítulos deseado. 35. Botón REPEAT Repite la reproducción del disco, título, capítulo, grupo o pista actual. 36.
PARA INSERTAR LAS PILAS Consulte la figura 7 de la página 14 1) Abra la cubierta del compartimiento de las pilas empujando la cubierta del mando a distancia en el sentido de la flecha. 2) Inserte 2 pilas "AA" en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-). 3) Vuelva a poner la cubierta. NOTAS: • Asegúrese de desconectar la alimentación de todos los componentes del sistema antes de conectar otro componente.
NOTA: Si, por alguna razón, el menú está en inglés o francés, pulse el botón SETUP en el mando a distancia, pulse el botón K o L para señalar el “LANGUAGE [ENGLISH]” o “LANGAGE [FRANÇAIS]”, a continuación, pulse el botón ENTER y pulse el botón SETUP en el mando a distancia. AJUSTE DE CANAL TV/VCR Puede programar el sintonizador para buscar todos los canales que recibe en su localidad. NOTA: El canal preparado NO es necesario cuando esté conectado a una caja de cable o caja de satélite.
SYLVANIA LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: LABOR: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. This warranty does not cover any cosmetic parts or complete assembly parts. FUNAI CORP.