How to Guide

you are unable to insert the plug into the outlet, contact your electrician

to replace your obsolete outlet, Do not defeat the safety purpose of the

grounding-type plug.

13.POWER - CORD PROTECTION - Power supply cords should

be routed so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and point where they exit from the product.

14.PROTECTIVE ATTACHMENT PLUG - The product is equipped

with an attachment plug having overload protection. This is a safety

feature. See Instruction Manual for replacement or resetting of protective

device. If replacement o f the plug i s required, b e sure the service

technician has used a replacement plug specified by the manufacturer

that has the same overload protection as the original plug.

15.OUTDOOR ANTENNA GROUNDING - If an outside antenna

is connected to the receiver, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up

static charges. Article 810 of the National Electrical Code, ANSI/NFPA

70, provides information with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna-discharge

unit, size of grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for the grounding

electrode.