How to Guide

Specifications

Bluetooth 2.1 (Headset/Hands-Free/A2DP Profiles)

Battery: Built-in rechargeable 3.7V / 120mAh lithium battery

Standby time: Up to 200hrs

Talk time: Up to 3hrs

Music play time: Up to 3hrs

Charging time: ＜2.5hrs

Operating range: Up to 10 meters

Operation temperature: -10℃~60℃

Dimension: 135.6mm(W)x167.3mm(L)x16.9mm(T)

Weight: 32g

How to Use

To turn it on:

Move the power switch to the "ON" side to turn on the headphone while it shows

blue LED light and vibrates.

To turn it off:

Move the power switch to the “OFF” side to turn off the headphone.

To pair it:

Move the power switch to the "ON" side, then it will show blue light and vibrate while

you will hear "Power on,Bluetooth mode"

When the Bluetooth enabled device finds it, select Sylvania SBT129-C-C from the list of found

devices. Once the headset enters Pairing Mode, the blue and red light will flash alernatively.

If asked for the PASS/PIN code please enter “0000”(4 zeros).

Note: If your handset supports Secure Simple Pairing (SSP), you will not need to

enter PASS/PIN code.

-Once pairing has completed successfully, you will hear "Connected".

Some handsets might ask for permission to access the phone’s contact list. If you receive a

message from your handset, please select “OK” or “Allow access”