How to Guide

Tuning the AM or FM Radio

Step 1: Adjust the Power Switch to AM or FM mode.

•

Both AM/FM antenna is built into the unit. Adjust the unit to improve reception.

Step 2: Turn the Tuning Dial to the desired AM or FM station.

Playing a CD

Step 1: Open the CD door, and place a CD or CD-R/RW into the player.

Step 2: Adjust the Power Switch to CD mode.

Step 3: Press the Play/Pause Button to begin playing the loaded CD.

Programming a CD

Step 1: Open the CD door, and place a CD or CD-R/RW into the player.

Step 2: Adjust the Power Switch to CD mode.

Step 3: Press the Program Button.

Step 4: Press the Skip/Search Buttons to select the CD track to play.

Step 5: Press the Program Button.

Step 6: Repeat Steps 4-5 to program up to 20 total CD tracks.

Using the Auxiliary Input

Step 1: Connect a mini-phono 3.5mm Cable (not included) to the Auxiliary

Input on the unit and the audio output on an MP3 player.

Step 2: Adjust the Power Switch to CD mode.

• Audio played through the connected MP3 player will now be heard

through the unit.

Audio Source Required Connector

MP3 Player mini-phono 3.5mm Cable (not included)