WARNINGS TO Prevent fire or shock hazard, do not use this plug with an extension cord, receptacle or add other outlet unless the blades can be can be fully inserted to prevent blade exposure. To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
Before Use Choose unit installation location carefully .Avoid placing it in direct sunlight or close to a source of heat . Also avoid locations subject to vibrations and excessive dust , cold or moisture . Keep away from sources that hum , such as transformers or motors . Do not open the cabinet as this might result in damage to the circuitry or electrical shock . If a foreign object should get into the set , contact your dealer . Be sure not to handle discs with dirty fingers .
Listening to Compact Disc Compact Disc Handing the Discs : This unit has been designed specifically for sound reproduction fr om compact discs bearing the mark . No other discs can be used . Always place the compact disc in the disc tray with the label facing upward . (Compact discs can be player only on one side) . To remove a disc from its storage case , press down on the center of the case and lift the disc out , holding it carefully CLEAN FROM CENTER TO EDGE by the edge .
Basic Operation Power on . Connect the power plug into the wall outlet . (A) (B) (B)BBS Bass Boost Sound. Press once to switch on BBS / Press again to switch off. (A)Listening through Earphones / Headphones . PHONES The sound from all speakers is cut off .
Listening to a Record Switch the PHONO CD TUNER knob to select PHONO . Select player speed . 33 Remove the tone arm-rest holder . Lift the Que-lever and move the tone arm gently to the desired position over the record . Lower the Que-lever slowly . The tone arm will return to the tone arm-rest automatically after reaching the end of the record .
Listening to CD Switch the PHONO CD TUNER knob to select CD . Open the tray , and place the CD on the tray . OPEN / CLOSE Close the tray and start playing the CD . OPEN / CLOSE CD`s should be placed in their trays with the label side up . (C)Press the The CD will start playing from the first track . button once to the beginning of the next track . (A) Stopping the CD play . Press the button once to go back to the start of the current track .
Listening to Radio Switch the PHONO CD TUNER knob to select TUNER . Switch the AM / FM knob to select desired band . Tune to the desired frequency . (A) FM reception (B) Antenna Any strong FM station will cause the FM stereo indicator For optimal FM reception be sure to stretch the built-in light to illuminate .
Repeat Play Program
Specifications AMPLIFIER section Output Power ........................................... 2W + 2W (U.S.A. / Canada) Frequency Response ................................ 60 to 20,000Hz TUNER section FM Section Frequency Range ..................................... 87.5 to 108.5MHz AM Section Frequency Range ..................................... 525 to 1710KHz (U.S.A. / Canada) CD PLAYER section Frequency Response ................................ 60 to 20,000Hz +/- 4dB Signal - to - Noise ratio ...............
Troubleshooting guide In case of trouble with the unit , please look through this chart and see if you can solve the problem by yourself before calling your dealer .