INTRODUCTION Owner's Manual INITIAL SETTING LD200SL8 CONNECTION 20" Digital / Analog LCD TV built-in DVD Player WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com INFORMATION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
INTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual.
INTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
INTRODUCTION 5 Contents INTRODUCTION DVD Functions TV Functions INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 INFORMATION Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 5 Features TV • DTV/TV/CATV - You can use your remote control to select channels which are broadcast in digital, conventional analog, standard definition. Also, cable subscribers can access their cable TV channels. • Program Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the TV screen. • Auto Channel Scan - This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.
INTRODUCTION 5 Remote Control Function 12 13 14 15 1 2 3 16 17 18 5 19 20 6 21 8 3. 4. 10 11 24 25 Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control. 2 3 INFORMATION 1 TROUBLESHOOTING 5 Installing the Batteries DVD SETTING POWER button (p13) Press to turn the unit on and off. MUTE button (p16) Press to turn the sound on and off. SLEEP button (p19) Press to activate the sleep timer.
INTRODUCTION 5 Control Panel 1 2 3 4 5 6 7 8 SETUP STOP PLAY EJECT VOLUME CHANNEL INPUT POWER DVD 9 10 1. SETUP button (p14 / p38) Press to display the main menu. 2. STOP C button (p28) Press to stop disc playback. 3. PLAY B button (p28) Press to begin disc playback. 4. EJECT A button (p28) Press to eject the disc. 5. VOLUME X / Y buttons (p16) Press to adjust the volume. 6. CHANNEL K/L buttons (p16) Press to select channels or move up/down through the main menu items. 7.
INTRODUCTION 5 Attaching a Wall Mount Bracket (sold separately) CONNECTION The following is a description of the method for attaching a wall mount to this unit. When performing this operation, refer to the instruction manual included with the wall mount kit. You need the following wall mount kit for this unit. Vision Mount LCD Mounts / model number: VMFb For more information, please visit CSAV website at www.csavinc.
CONNECTION Cables not included. Please purchase the necessary cables at your local store. 5 Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sure your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.
INTRODUCTION Cables not included. Please purchase the necessary cables at your local store. CONNECTION 5 External Device Connection INITIAL SETTING [Component Video Cable Connection] Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks.
CONNECTION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO1. When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack. e.g.
These operations are accessible by remote control. Some may also be accessible by controls on the main unit. 5 Initial Setup Note: Before you begin: Make sure if the unit is connected to antenna or cable. [POWER] to turn on the unit. • This operation may take a few moments. from the choices on the right side of the TV screen.
INITIAL SETTING 5 Main Menu 5 Auto Channel Scan This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below. If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.
5 Language Selection You can choose English, Spanish, or French as your on-screen language. 1 Press [SETUP] to display the main menu. CONNECTION INITIAL SETTING • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. • When no channel can be received by auto channel scan, “NO TV SIGNALS” will be displayed on the TV screen. • Channel settings will be saved even if the power fails.
WATCHING TV 5 Channel Selection 5 Volume Adjustment Select channels by pressing [CH. K/L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CH. K/L] or [the Number buttons]. • To select the non-memorized channels use [the Number buttons]. Use [VOL. X/Y] to adjust the audio volume.
INTRODUCTION 5 MTS System You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. MTS (multichannel television sound) system is the method of encoding 3 additional channels of audio into an NTSC-format audio carrier. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.
WATCHING TV 5 Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the analog mode, the current channel number is displayed. Press [DISPLAY]. In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Press [DISPLAY] repeatedly to cycle through the available display modes.
DTV Press [SCREEN MODE] repeatedly to switch the TV aspect ratio. 5 Sleep Timer The sleep timer can be set to automatically turn off the unit after an incremental period of time. CONNECTION 2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal. INTRODUCTION 5 TV Screen Display Mode 1 Press [SLEEP] to set the sleep timer. INITIAL SETTING SLEEP OFF • Sleep timer display appears on the TV screen.
OPTIONAL SETTING 5 Channel Add/Delete Note: The channel add/delete function lets you add the channel that was not added by the auto channel scan due to the reception status at the initial setting. You can also delete the unnecessary channels. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K/L] to select “CHANNEL SETUP”, then • ”ADD/DELETE(DTV)” or “ADD/DELETE(TV)” menu will disappear automatically in about 10 seconds.
INTRODUCTION 5 Closed Caption 3 Press [SETUP] to exit. TV 1 Press [SETUP] to display the main menu. [ENTER] repeatedly to change the setting. e.g.) digital TV mode or [ENGLISH] [OFF] [BRIGHT] [NORMAL] [CAPTION1] OPTIONAL SETTING [OFF] • To show the closed caption on your TV screen, broadcast signal must contain the closed caption data. • Not all TV programs and commercials have the closed caption or all types of the closed caption. • Captions and texts may not match the TV voice exactly.
OPTIONAL SETTING 5 DTVCC Style 5 DTV Closed Caption DTV DTV In addition to the basic closed caption described on page 21, DTV has its own closed caption called DTVCC. Use this menu to change the settings for DTVCC. You can change the style of DTV CC such as font, color or size, etc. 1 Press [SETUP] to display the main menu. 1 2 Use [Cursor K /L] to select “DTVCC“, then press 2 Use [Cursor K /L] to select “DTVCC“, then press [ENTER]. Press [SETUP] to display the main menu. [ENTER]. e.g.
INTRODUCTION 5 Back Light Setting You can set the desired brightness mode. CONNECTION 1 Press [SETUP] to display the main menu. • CAPTION SIZE Closed captioning font size can be changed as below. • CHARACTER EDGE Edge type of the displayed caption can be switched as below. 2 Use [Cursor K /L] to select “BACK LIGHT”, then press [ENTER] repeatedly to change the setting. e.g.
OPTIONAL SETTING 5 Color Temperature 5 V-chip You can adjust color temperature of the TV screen. V-chip reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programming inappropriate for children. 1 Press [SETUP] to display the main menu. 1 Press [SETUP] to display the main menu. 2 Use [Cursor K /L] to select “COLOR TEMP.
INTRODUCTION A. TV Rating [ENTER]. e.g.
OPTIONAL SETTING B. MPAA Rating C. Change Password MPAA Rating is the rating system created by MPAA (Motion Picture Association of America). Although the default code “0000” is supplied with the unit, you can set your own password. 4 Use [Cursor K /L] to select “MPAA RATING”, then press 4 Use [Cursor K /L] to select “CHANGE PASSWORD”, then [ENTER]. press [ENTER].
INTRODUCTION OPERATING DVD DVD Functions 5 Playable Media Mark (logo) DVD-video *1, 2, 4, 6, 10, 11 Region code 1 Recorded signals Media size CONNECTION Type of media Disc types or ALL DVD+RW DVD+R * 1, 4, 5, 6, 9, 10 - audio CD * 4, 6, 10 - e. g.) digital video (MPEG2) title 1 title 2 chapter 1 chapter 2 chapter 3 chapter 4 chapter 1 chapter 2 WATCHING TV - INITIAL SETTING DVD-RW DVD-R * 1, 3, 4, 5, 6, 7, 8, 9, 10 5 inches (12 cm) audio CD e. g.
OPERATING DVD These operations are accessible by remote control. Some may also be accessible by controls on the main unit. 5 Playback Before you begin: Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver are set to the correct input mode. 1 Press [POWER] to turn on the unit. Note: • “ ” may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.
INTRODUCTION 5 Step-by-step Playback 5 Zoom DVD DVD CONNECTION The zoom function allows you to enlarge the video image and to pan through the enlarged image. Each time you [PAUSE F] in the pause mode, the disc goes forward one frame at a time. 1 During playback, press [MODE] repeatedly until “ To continue playback, press [PLAY B]. ” appears. OFF (ZOOM) INITIAL SETTING Note: • Set “STILL MODE” to “FIELD” in “DISPLAY“ menu if pictures in the pause mode are blurred. (Refer to page 39.
OPERATING DVD 5 MP3 Playback MP3 MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the personal computer and play the files on this unit. 1 Insert an CD-RW/-R with MP3 files, playback starts automatically. • Press [PLAY B] if the disc is already inserted. • Press [MENU] when you want to call up the file list. When selecting the folder: • Press [Cursor B] when you want to go to the next hierarchy.
INTRODUCTION 5 Search Functions Chapter / Title Search CD MP3 Using [MODE] Using [MODE] playback, press [MODE] repeatedly until 1 During “ “ appears. 1 During playback, press [MODE] repeatedly until “ “ appears. _ _ /29 (SEARCH) INITIAL SETTING • If you want to perform the title search, press [Cursor K / L] repeatedly until “ “ appears. CONNECTION DVD Track Search _ _ /12 (SEARCH) 2 Press [the Number buttons] to select your desired track within 60 seconds.
OPERATING DVD 5 Repeat Playback Time Search DVD You can repeat playback chapters, titles or tracks/files on a disc. CD 1 During playback, press [MODE] repeatedly until “ “/“ playback, press [MODE] repeatedly until 1 During “ “ appears. “ appears. OFF (REPEAT) e.g.) DVD 2 Press [Cursor K / L] to change the repeat mode. _ _ /12 (SEARCH) DVD 2 Use [Cursor K / L] repeatedly until “ or TOTAL “ appears.
INTRODUCTION Note: Note: MP3 You may determine the order in which tracks/files will be play back. 1 In stop mode, press [MODE] repeatedly until the “PROGRAM” menu appears. PROGRAM CD-DA ENTER PLAY CLEAR T T T T T T T 1 2 3 4 5 6 7 TOTAL 0:00:00 3:31 4:28 4:19 3:58 4:12 4:02 3:55 1/ 3 1/ 1 T 1 3:31 press [ENTER] to store. • Additional tracks/files may be on other screens. Use [Cursor K/ L] to go on to the next / previous pages.
OPERATING DVD 5 On-screen Display CD You can check the information about the current disc by pressing [DISPLAY] on the remote control.
INTRODUCTION 5 Special Settings Subtitle Language This unit allows you to select a subtitle language (if available) during DVD playback. 1 During playback, press [MODE] repeatedly until “ appears. CONNECTION DVD DVD “ Audio Language This unit allows you to select an audio language (if multiple languages are available) during DVD playback. During playback, press [AUDIO] repeatedly until the desired language appears. INITIAL SETTING 1.ENG Dolby D 3/2.
OPERATING DVD Virtual Surround Black Level Setting You can enjoy virtual surround on your existing 2 channel stereo system. DVD Adjust the black level to make the dark areas of the TV picture brighter. 1 During playback, press [MODE] repeatedly until “ “ appears. 1 During playback, press [MODE] repeatedly until “ “ appears. OFF (BLACK LEVEL) 2 Use [Cursor K / L] to adjust the black level. or ON (BLACK LEVEL) ON : Makes the dark areas brighter. OFF : Shows the original picture as recorded.
INTRODUCTION Marker Setup This feature allows you to assign a specific point on a disc to be called back later. CD To set a marker To return to the marker later 1 During playback, press [MODE] repeatedly until 1 To select a desired marker, repeat steps 1-3 in “ CONNECTION DVD ”/“ ” appears. “To set a marker“. e.g.) DVD INITIAL SETTING e.g.) DVD _ _ /12 (SEARCH) or 2 Use [Cursor K /L] repeatedly until maker search menu appears.
DVD SETTING Settings are only effective when the unit is in DVD mode and any discs should not be played back. QUICK MENU AT A GLANCE If you make setting for “TV MODE“ or “DOLBY DIGITAL”, you can also enter from the “QUICK“ menu. Use [Cursor K /L] to select “QUICK” and press [ENTER] at step 3. SETUP [ENTER]. [AUDIO] *1, *2 (Default: ORIGINAL) Select the desired audio language.
You can change the TV aspect ratio and still mode clarity in “DISPLAY” menu. [ENTER]. CONNECTION 1 In stop mode, press [SETUP] to display “TV SETUP”. 6 Use [Cursor K /L] to select the desired item, then press [TV MODE] (Default: 4:3 LETTER BOX) Select the desired TV aspect ratio. --- TV SETUP --LANGUAGE BACK LIGHT COLOR TEMP.
DVD SETTING 5 DVD Audio Setting Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD. 1 In stop mode, press [SETUP] to display “TV SETUP”. --- TV SETUP --LANGUAGE BACK LIGHT COLOR TEMP. DVD SETUP [ENGLISH] [BRIGHT] [NORMAL] 6 Use [Cursor K /L] to select the desired item, then press [ENTER]. [DRC] (Default: ON) Sets the dynamic range control. This function is available only on the discs which are recorded in the Dolby Digital format.
Parental setting prevents your children from viewing inappropriate materials. (password protected.) Playback will stop if the ratings exceed the levels you set. 7 Use [Cursor K /L] to select the desired item, then press [ENTER]. LANGUAGE BACK LIGHT COLOR TEMP.
DVD SETTING 5 Others 6 Use [Cursor K /L] to select the desired item, then press You can change the other functions. 1 In stop mode, press [SETUP] to display “TV SETUP”. --- TV SETUP --LANGUAGE BACK LIGHT COLOR TEMP. DVD SETUP [ENGLISH] [BRIGHT] [NORMAL] [ENTER]. [ANGLE ICON] (Default: ON) Set to “ON” to show the angle icon when multiple camera angles are available during DVD playback. SETUP or OTHERS ANGLE ICON SCREEN SAVER ON OFF 2 Use [Cursor K /L] to select “DVD SETUP”, then press [ENTER].
5 Language Code List You can reset all the settings except for the parental setting and on-screen menu language. Language --- TV SETUP --LANGUAGE BACK LIGHT COLOR TEMP. DVD SETUP [ENGLISH] [BRIGHT] [NORMAL] [ENTER]. --- TV SETUP --LANGUAGE BACK LIGHT COLOR TEMP. DVD SETUP [ENGLISH] [BRIGHT] [NORMAL] [ENTER]. SETUP or SELECT:K/L EXIT:SETUP SET:ENTER CANCEL:RETURN 4 Use [Cursor K /L] to select “YES”, then press [ENTER].
TROUBLESHOOTING 5 Troubleshooting Guide If the unit does not perform properly when operated as instructed in this owner’s manual, check the following chart once before calling for service. Symptom Remedy No power • Be sure the power cord is plugged in. • If a power failure occurs, unplug the power cord for 30 minutes to allow the unit to reset itself. No picture or sound • Check if the power is on. • Check the outlet connection. • Check the antenna or cable connection to the main unit.
INTRODUCTION • Many digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the broadcasting stations. These are the numbers used for analog broadcasts. Remote control does not work • Check the antenna or cable connection to the main unit. • Check the batteries of the remote control. • Check if there is an obstacle between the infrared sensor window and the remote control. • Test the signal output. If OK, then possible remote sensor trouble.
INFORMATION 5 Glossary ATSC Dolby Digital Region Code Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio. Aspect ratio EDTV (enhanced definition TV) The width of a TV screen relative to its height.
INTRODUCTION 5 Cable Channel Designations CATV channel TV Display CATV channel TV Display CATV channel TV Display CATV channel TV Display CATV channel TV Display CATV channel TV Display 2 2 J 23 W+8 44 W+29 65 W+50 86 W+66 107 W+87 128 3 3 K 24 W+9 45 W+30 66 W+51 87 W+67 108 W+88 129 4 4 L 25 W+10 46 W+31 67 W+52 88 W+68 109 W+89 130 5 5 M 26 W+11 47 W+32 68 W+53 89 W+69 110 W+90 131 6 6 N 27 W+12 48 W+33 69 W+54 90 W+70 111 W+91 132 7 7 O 28 W+13 49 W+34 70 W+55 91 W+71 112 W+92 133 8 8 P 29 W+1
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: LABOR: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are excluded from this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
