OWNER’S MANUAL COLOR TV/VCR SRC2213 This Owner’s Manual is made of recycled paper. As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. ENERGY STAR ® is a U.S. registered mark. INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-968-3429.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
F IGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE ANTE NNA L EAD I N WI RE GROUND CLAMP A NTENNA DI SCHARG E UN I T (NEC SECTION 8 10 -2 0) EL ECT RI C SE RV I CE EQ U I PM EN T G RO UNDI NG CO NDUCT ORS (NEC SECTION 8 10 -2 1) G RO UND CL AM PS NEC - NATI O NAL EL ECTRI CAL CO DE POWER SERVI C E G RO UNDI NG EL EC TR O DE SYST EM (NEC ART 2 50 , PART H) S2 8 9 8 A 13.
PRECAUTIONS LOCATION For safe operation and satisfactory performance of your TV/VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
TABLE OF CONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2 C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4 LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .4 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 C SUPPLIED ACCESSORIES . . . . . . . . . . . . . . .
FEATURES • Infrared remote control • Bilingual on screen menu display selectable in • • Zero Return–The tape returns to counter of 0:00:00 by rewinding or fast forwarding. • English or Spanish Real time counter–This shows the elapsed record- ing or playback time in hours, minutes, and seconds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”.
OPERATING CONTROLS AND FUNCTIONS NOTE: • We do not recommend the use of universal remote controls. Not all of the functions may be controlled with a universal remote control. If you decide to use a universal remote control with this unit, please be aware that the code number given may not operate this unit. In this case, please call the manufacturer of the universal remote control. - TV/VCR FRONT PANEL - [Fig.
- REAR VIEW - [Fig.3] ANT. 26 8 REW button– Press to rewind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search) s button– • Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP) 9 PLAY button– Press to begin playback. K button– • Press to select setting modes from the on screen menu. • Press to enter digits when setting program. (for example: setting clock or timer program) 10 F.
PREPARATION FOR USE ANTENNA/CABLE CONNECTIONS Satellite Box or OUT Cable Box (Not supplied) From Cable System or Satellite Dish VHF/UHF Antenna (Not supplied) Rod Antenna (Supplied) IN VHF Antenna (Not supplied) From Cable System UHF Antenna (Not supplied) or VHF/UHF or Combiner or 75-ohm Coaxial Cable (Not supplied) (Not supplied) ANT. or Flat twin-lead cable VHF/UHF COMBINED ANTENNA VHF/UHF SEPARATE ANTENNAS The VHF/UHF Rod Antenna (supplied) is detachable.
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL 1. Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. EXTERNAL INPUT MODE INSTALLING THE BATTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow. 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.
1 TO SELECT A DESIRED CHANNEL You can select the desired channel by using the CHANNEL K or L button on or directly pressing the number buttons on the remote control. Note for using the number buttons: • When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”). • You must proceed single-digit channel numbers with a zero (Example: 02 ... 09).
1 Select “SETTING CLOCK” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”. Then, press the F.FWD/B button. 2 –MENU– TIMER PROGRAMMING PICTURE CONTROL B SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH Select “MANUAL CLOCK SET” Press the PLAY/K or STOP/L button to point to “MANUAL CLOCK SET”. Then, press the F.FWD/B button.
1 2 2 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button. Select “ADD/DELETE CH” Press the PLAY/K or STOP/L button to point to “ADD/DELETE CH”. Press the F.FWD/B button. Select “ENGLISH” or “ESPAÑOL” Select “ENGLISH” or “ESPAÑOL”= Spanish using the F.FWD/B or REW/s button.
TV OPERATION WATCHING A TV PROGRAM 1 PICTURE CONTROL Turn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box.
TO CANCEL THE CLOSED CAPTION SYSTEM CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dialogue caption or text display. CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, you can watch half screen text information if you want. 1-2: You may get these captions or text information by selecting either “1” or “2”.
4 5 Select your desired item Press the PLAY/K or STOP/L button to point to your desired item. Then, press the F.FWD/B button to select [BLOCK] or [VIEW]. B TV–Y TV–Y7 ( TV–G TV–PG ( TV–14 ( TV–MA ( ) ) ) ) [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] MPAA RATING SET UP • When you select the rating category and turn it • [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.
CHANGE ACCESS CODE 5 To change access code, follow the steps. Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen. • If you enter wrong code, repeat step 5, making sure you enter the same new code exactly in the confirm code space. NEW CODE 1 XXXX Press the MENU button so that the TV/VCR SETUP display appears on the TV screen.
2 Select “ALL” or “BLANK” Press the PLAY/K or STOP/L button to point to “REPEAT PLAY”. Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears. RENTAL B REPEAT PLAY AUTO RETURN 3 1 – USER’S SET UP – Rewind or fast forward the tape to the beginning point at which you want to review. [OFF] [ALL] [OFF] 2 Reset the counter to 0:00:00 Press the COUNTER RESET button repeatedly.
4 PICTURE CONTROLS Begin Time Search By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point. The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically. TRACKING ADJUSTMENT • Tracking adjustment will be set automatically • TO CANCEL THE TIME SEARCH at this point Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.
RECORDING TWO DIFFERENT TAPE SPEEDS ERASE PREVENTION Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play). The table below shows the maximum recording/playback time using T60, T120 or T160 tapes in each mode. Tape Speed Recording/Playback Time You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
• To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control. • To show the remaining time, press the DISPLAY • • • button on the remote control so that “OTR” appears on the TV screen. (It will show up momentarily then disappear.) Recording stops when 0:00 is reached. Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120).
3 Set the channel number Press the PLAY/K or STOP/L button until the desired channel number appears. (Example: CH61) Then, press the F.FWD/B button. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.
TO CORRECT A PROGRAM AUTO RETURN • While setting a program; press the REW/s but• ton to go back one step and enter the correct numbers using the PLAY/K or STOP/L button. After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21. 3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button. 4)Press the POWER button to set automatic timer recording.
2 SLEEP TIMER Select “TV” or “TAPE” Press the PLAY/K or STOP/L button until to point to “TV/TAPE”. Press the F.FWD/B or REW/s button, and select [TV] or [TAPE]. 3 WAKE UP ON/OFF TIMER B TV/TAPE TIME [ON] [TV] [12:00AM] Set wake up time 1 Press the PLAY/K or STOP/L button until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears. Each additional push will increase (or decrease) the time by 10 minutes.
ON SCREEN DISPLAY To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: WHEN THE CLOSED CAPTION MODE IS OFF: • Counter mode: After 5 seconds, only • the counter remains. To clear it, press the DISPLAY button. Clock mode: After 5 seconds, only the clock and the channel number remain.
TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM No power. No picture and sound. No picture or poor picture on TV/VCR. No sound or poor sound. Timer recording is not possible. Cannot go into Record mode. Playback picture is partially noisy. No picture but the audio is OK in playback.
SPECIFICATIONS GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS CRT : Video input level : Audio input level : Video S/N ratio : Audio S/N ratio : 13 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary two-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.
CONTROLES DE OPERACIÓN Y SUS FUNCIONES NOTA: No recomendamos utilizar mandos a distancia universales. No todas las funciones pueden ser controladas mediante un mando a distancia universal. Si decide utilizar un mando a distancia universal con esta unidad, tenga en cuenta que con el número de código dado tal vez no se pueda controlar la unidad. En este caso, póngase en contacto con el fabricante del mando a distancia universal.
ANT. 26 10 Botón de avance rápido (F.FWD)– Púlselo para avanzar rápidamente la cinta, o para ver la imagen en avance rápido durante el modo de reproducción. (Búsqueda con avance rápido) Botón B– • Cuando establezca un programa (por ejemplo: para ajustar el reloj o para establecer un programa de temporizador), púlselo para determinar su elección y vaya al paso siguiente que quiera introducir. • Púlselo para determinar los modos de ajuste desde el menúde la pantalla.
CONEXIONES DE ANTENA/CABLE Caja de CATV o caja de emisiones vía satélite (no incluído) OUT Desde el cable coaxil o caja de emisiones vía satélite de 75 ohm del sistema de Cable Antena de varilla UHF/VHF (incluído) IN Antena combinada de VHF/UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable Antena UHF (no incluído) O Combinador de O VHF/UHF (no incluído) ANT.
PREPARACIÓN DE CANALES POR PRIMERA VEZ AJUSTE DEL RELOJ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar. NOTA: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación. 2) Pulse el botón POWER para encender el televisor/videograbadora. 3) Seleccione “ENGLISH” o “ESPAÑOL” utilizando el botón F.FWD/B o REW/s. “[ ]” indica el idioma seleccionado.
Get it fixed, at your home or ours! For repair of major brand appliances in your own home… no matter who made it, no matter who sold it! 1-800-4-MY-HOME SM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.sears.
