Operation Manual

SYMEN 2009/02
16. Specification
28
Model
Item
Specification
Citycom 300i Citycom 125
length
2,210 mm(87 in)
width
785 mm(30.9 in)
Height
1,445 mm(56.9 in)
Wheel base
1,500 mm(59.0 in)
Net Weight
184 kg(405.7 lb) 167Kg(367.6 lb)
Maximum load 352 Kg(776.0 lb) 317Kg(698.8 lb)
Type 4- stroke 4V single cylinder engine
Fuel
UNLEADED(OCTANE 92 OR HIGHER)
Cooling type Water-cooled
Displacement 262.8 ㏄ 124.5cc
Compression ratio 10:1 10.5:1
Max. HP 21 ps(15.4 Kw) / 7,000 rpm 13.2 ps(9.7 Kw)/8,500 rpm
Max. torque 2.4 kg-m(23.5 Nm) / 5,500 rpm 1.22 kg-m(12 Nm)/6,500 rpm
IDLE 1,650±100 rpm 1,800±100 rpm
Starting methods Electrical
Front shock absorber TELESCOPIC FORK
Rear shock absorber UNIT SWING
Clutch / Transmission Centrifugal type / CVT
Front tire / Rear tire 110/70-16 52P / 140/70-16 65P 120/70-15 56P / 140/70-14 68P
Front rim / Rear rim MT 16×3.0 / 16×3.5 MT 3.50 × 15 / MT 3.75 × 140
Wheel Aluminum alloy
Tire pressure
Front: STD 1.75kg/cm
2
,
Rear: STD 2.0 kg/cm
2
for 1 person, 2.25 kg/cm
2
for 2 person
Front brake Disc type (Ø 260 mm)
Rear brake Disc type (Ø 260 mm) Disc type (Ø 220 mm)
Front light bulb(high, low) 12V 35W / 35W × 2
Brake light bulb(tail light) 12V 5W / 21W × 2
License light bulb 12V 10W × 1
Position lamp bulbs 12V 10W × 2
Turn signal light bulbs 12V 21W × 4
Gauge pilot bulbs 12V 1.7W
Engine oil capacity 1.4 L (1.2 L for change) 1.0 L (0.8 L for change)
Transmission oil capacity 180 ㏄. (160 ㏄. for change) 110 ㏄. (100 ㏄. for change)
Fuel tank capacity 10 L
Fuse 20A×3, 15A×2,
Spark plug NGK CR 8E NGK CR 7E
Battery capacity 12V 12Ah 12V 8Ah
Air cleaner Paper type
Fuel tank cap Open lock type
Front light General type (singles)
Rear grab frame Can load cargo (maximum load : 5kg)