Operation Manual

9. Final Drive Mechanism
9-7
Re-assembly of Final Driven
Mechanism
HU05U
Apply with grease onto the oil seal lip of final
driven shaft.
Install final driven shaft and final driven gear,
countershaft, and countershaft gear.
Install the dowel pins (2 pins) and new gasket.
Install the gear box cover and 7 bolts (tighten the
bolts).
Torque value: 2.0~2.4kgf-m
HU10U/W
Apply with grease onto the oil seal lip of final
driven shaft.
Install final driven shaft and final driven gear,
countershaft, and countershaft gear.
Install the dowel pins (2 pins) and new gasket.
Install the gear box cover and 7 bolts (tighten the
bolts).
Torque value: 2.0~2.4kgf-m
Final dri
v
en
shaft / Gear
Counte
r
shaft
/ gear
Dowel pin
Drive shaft
7 screws
Final driven shaft
Counter shaft / gear
Dowel pin
Gasket
Final driven Gear
To this chapter contents