Operation Manual

5. Removal & Installation of Engine

5-2

Operational Precautions

General Information

y Engine must be supported by a bracket or adjustable tool in height.

y The following parts can be serviced with the engine installed on the frame.

1. Carburetor

2. Driving disk, driving belt, clutch, and transporting disk

3. Final reduction gear mechanism

Specification

Item

MIO 50 MIO 100

Replacement 700 c.c. 650 c.c.

Engine Oil Capacity

Disassemble 800 c.c. 750 c.c.

Replacement 90 c.c. 100 c.c.

Gear Oil Capacity

Disassemble 100 c.c. 110 c.c.

Torque Values

Engine hanger bolt (frame side) 4.5~5.5kgf-m

Engine hanger nut (engine side) 4.5~5.5kgf-m

Bolt of rear cushion upper connection 3.5~4.5kgf-m

Bolt of rear cushion lower connection 2.4~3.0kgf-m

To this chapter contents