Operation Manual

6. Cylinder Head / Valve
6-8
Remove the camshaft.
Camshaft Inspection
Inspect cam lobe height for damaged.
Service Limit:
(Refer to page 2)
Inspect the camshaft bearing for looseness or
wear out. If any damaged, replace whole set of
camshaft and bearing.
Measure the cam rocker arm I.D.
Service Limit:
(Refer to page 2)
Measure the active O.D. of the cam rocker arm
shaft and cam rocker arm.
Service Limit:
(Refer to page 2)
Calculate the clearance between the rocker arm
shaft and the rocker arm.
Service Limit:
(Refer to page 2)
To this chapter contents