Operation Manual

10
§REAR SHOCK ABSORBER ADJUSTMENT §
There are five positions in each shock absorber
can be adjusted.
I: normal position. (light rode or good road
condition)
II~V: increase the spring tension gradually.
Method of adjustmentheavier load or worse road
condition)
Pull up the shock absorber spring, adjust the
adjuster.
§BRAKE §
Avoid unnecessary sudden braking.
Use front and rear wheel brakes simultaneously when braking.
Avoid brake continuously for a long period of time because that may overheat the brakes and
reduce its braking efficiency.
Slow down and brake early when riding in rainy days on slippery roads. Never apply the brakes
suddenly to prevent skidding and falling.
Using only the front brake or the rear brake increases the risk of falling because the motorcycle
is tend to pulled to one side.
Engine Brake
Return the throttle valve handle back to its original position, and apply engine brake.
It is necessary to apply brake both for front wheel and for rear wheel intermittently when riding on a
long or stiff slope.
For Front Wheel
CAUTION:
The left and right absorbers must be adjusted
with the same position.
I II III IV V
SoftHard
djuster
For Rear Wheel